This centralizes the code that both `extractor` and the decompiler
executes. In the past this code was partially-duplicated, meaning that
the `extractor` could only do _some_ operations and not others (ie.
could not extract the audio files).
I also simplified the process to enable audio streaming in the
configuration. This is to support a new feature in the launcher that
allows you to enable these options for the decompiler:
This fixes issues with certain Jak 3 levels not rendering because there
is a mismatch between the DGO name, nickname and real level name (bsp
name).
FR3s use a different filename, so you can delete the ones you have after
this is merged.
This affects custom levels, but I don't have that toolchain set up so
someone else will have to test that.
- `fma-sphere`
- `prim-beam-h`
- `cam-start`
- `ragdoll`
- `light-trails-h`
- `light-trails`
- `menu`
- `water`
- `water-flow`
- `hud`
- `hud-classes`
- `progress`
- `progress-draw`
---
The `get-texture` macro replaces calls to `lookup-texture-by-id` and
`lookup-texture-by-id-fast`. The `defpart` macro detection was modified
to print a pair like `(texture-name tpage-name)` for the texture field
that gets turned into a `texture-id` constant. Only used in Jak 3 at the
moment, I'll probably go through the other games at a later point.
Small fix to decompiler when the original compiler uses `ra` register.
This seems to happen in "normal" code very rarely - perhaps they
manually specified this in an `rlet`.
Start figuring out buckets/textures for Jak 3.
The foreground code is not yet modified for PC - I want to wait until
the game is running, since it is too hard to do it now.
- `speech`
- `ambient`
- `water-h`
- `vol-h`
- `generic-obs`
- `carry-h`
- `pilot-h`
- `board-h`
- `gun-h`
- `flut-h`
- `indax-h`
- `lightjak-h`
- `darkjak-h`
- `target-util`
- `history`
- `collide-reaction-target`
- `logic-target`
- `sidekick`
- `projectile`
- `voicebox`
- `ragdoll-edit`
- most of `ragdoll` (not added to gsrc yet)
- `curves`
- `find-nearest`
- `lightjak-wings`
- `target-handler`
- `target-anim`
- `target`
- `target2`
- `target-swim`
- `target-lightjak`
- `target-invisible`
- `target-death`
- `target-gun`
- `gun-util`
- `board-util`
- `target-board`
- `board-states`
- `mech-h`
- `vol`
- `vent`
- `viewer`
- `gem-pool`
- `collectables`
- `crates`
- `secrets-menu`
Additionally:
- Detection of non-virtual state inheritance
- Added a config file that allows overriding the process stack size set
by `stack-size-set!` calls
- Fix for integer multiplication with `r0`
- Fixed detection for the following macros:
- `static-attack-info`
- `defpart` and `defpartgroup` (probably still needs adjustments, uses
Jak 2 implementation at the moment)
- `sound-play` (Jak 3 seems to always call `sound-play-by-name` with a
`sound-group` of 0, so the macro has been temporarily defaulted to use
that)
One somewhat significant change made here that should be noted is that
the return type of `process::init-from-entity!` was changed to `object`.
I've been thinking about this for a while, since it looks a bit nicer
without the `(none)` at the end and I have recently encountered init
methods that early return `0`.
During level extraction, the last 4 characters of the level name are
always removed, because it is assumed that '-vis' is there. But it isn't
always there. This is especially true in post-TPL games.
This causes multiple problems:
- There can be levels in the extraction that will miss their last 4
characters from their name, which is sad, and may make it harder to
identify them.
- If there are '-vis'-less levels whose names are identical apart from
the last 4 characters, the extractor will only get the last one (it
probably extracts all but overwrites everything but the last one). For
example 'ctyasha' and 'ctykora'.
This issue affects the glb extraction and the entities json extraction.
I personally think that just keeping the -vis in the name would be the
best solution, but I guess there was a reason why it was decided that it
should be removed from the name. So to adapt to this, my implementation
will still remove '-vis' from the name, but only if it is actually in
the name - otherwise it won't remove anything.
I hope my changes didn't break anything. Extraction seemed to run fine
after my changes, and I was able to see both ctyasha and ctykora json
files. And didn't see any '-vis', so it is still properly removed.
---------
Co-authored-by: Tyler Wilding <xtvaser@gmail.com>
Added a new `rip_collision` flag to the decompiler config and wired it
up. Cleaned up the comments around these fields in the JSON too for
clarity
Also refactored a bunch of the related extract functions to read from
`config` object rather than pass down a bunch of booleans
Currently only tracks enemy kills, and how they were killed. There is
currently no menu for this, but I've already added most of the text for
it. Also did a bunch of misc decompilation fixes and renamed some
methods.
Fixes#3277Fixes#3278
Adds the opengoal cheats to the secrets menu. Only cheats that are fully
functional and unlockable are there right now, which is eight cheats.
This update will reset most Jak 2 settings.
Also fixes#3274 .
Switches the slime look up table to be a texture, since I guess intel
drivers are terrible and putting the array in the shader makes it
extremely slow.
Also, a few minor changes:
- removed art-groups from the test-zone levels since this causes the
compiler to re-decompile the game, and makes the launcher slower. (left
it in commented out)
- Switched `decompile_code` to false by default in jak 2, in case people
run the decompiler and don't want to wait forever
- Fixed build warnings
Major change to how `deftype` shows up in our code:
- the decompiler will no longer emit the `offset-assert`,
`method-count-assert`, `size-assert` and `flag-assert` parameters. There
are extremely few cases where having this in the decompiled code is
helpful, as the types there come from `all-types` which already has
those parameters. This also doesn't break type consistency because:
- the asserts aren't compared.
- the first step of the test uses `all-types`, which has the asserts,
which will throw an error if they're bad.
- the decompiler won't emit the `heap-base` parameter unless necessary
now.
- the decompiler will try its hardest to turn a fixed-offset field into
an `overlay-at` field. It falls back to the old offset if all else
fails.
- `overlay-at` now supports field "dereferencing" to specify the offset
that's within a field that's a structure, e.g.:
```lisp
(deftype foobar (structure)
((vec vector :inline)
(flags int32 :overlay-at (-> vec w))
)
)
```
in this structure, the offset of `flags` will be 12 because that is the
final offset of `vec`'s `w` field within this structure.
- **removed ID from all method declarations.** IDs are only ever
automatically assigned now. Fixes#3068.
- added an `:overlay` parameter to method declarations, in order to
declare a new method that goes on top of a previously-defined method.
Syntax is `:overlay <method-name>`. Please do not ever use this.
- added `state-methods` list parameter. This lets you quickly specify a
list of states to be put in the method table. Same syntax as the
`states` list parameter. The decompiler will try to put as many states
in this as it can without messing with the method ID order.
Also changes `defmethod` to make the first type definition (before the
arguments) optional. The type can now be inferred from the first
argument. Fixes#3093.
---------
Co-authored-by: Hat Kid <6624576+Hat-Kid@users.noreply.github.com>
This change adds a few new features:
- Decompiler automatically knows the type of `find-parent-method` use in
jak 1 and jak2 when used in a method or virtual state handler.
- Decompiler inserts a call to `call-parent-method` or
`find-parent-state`
- Removed most casts related to these functions
There are still a few minor issues around this:
- There are still some casts needed when using `post` methods, as `post`
is just a `function`, and needs a cast to `(function none)` or similar.
It didn't seem easy to change the type of `post`, so I'm not going to
worry about it for this PR. It only shows up in like 3 places in jak 2.
(and 0 in jak 1)
- If "call the handler if it's not #f" logic should probably be another
macro.
Fixes#805
Adds controller LED features to Jak 2:
- progressive flickering denoting health
- copies tomb simon says puzzle colors
- unique colors for each gun
- orange color for being indax
- yellow color for being in mech
- purple color for being darkjak
- blue color for being in board
- red flash when wanted.
May add more features later?
Also did some minor clean-up on some types.
This renames the method object in `defmethod`s to `this` and adds
detection for the `set-time!` and `time-elapsed?` macros.
Definitely my biggest PR yet...
- state handlers that are not inlined lambdas have smarter type
checking, getting rid of 99.9% of the casts emitted (they were not
useful)
- art groups were not being properly linked to their "master" groups.
- `max` in `ja` in Jak 2 was not being detected.
Another huge PR...
Previously, `object` and `none` were both top-level types. This made
decompilation rather messy as they have no LCA and resulted in a lot of
variables coming out as type `none` which is very very wrong and
additionally there were plenty of casts to `object`. This changes it so
`none` becomes a child of `object` (it is still represented by
`NullType` which remains unusable in compilation).
This change makes `object` the sole top-level type, and the type that
can represent *any* GOAL object. I believe this matches the original
GOAL built-in type structure. A function that has a return type of
`object` can now return an integer or a `none` at the same time.
However, keep in mind that the return value of `(none)` is still
undefined, just as before. This also makes a cast to `object`
meaningless in 90% of the situations it showed up in (as every single
thing is already an `object`) and the decompiler will no longer emit
them. Casts to `none` are also reduced. Yay!
Additionally, state handlers also don't get the final `(none)` printed
out anymore. The return type of a state handler is completely
meaningless outside the event handler (which is return type `object`
anyway) so there are no limitations on what the last form needs to be. I
did this instead of making them return `object` to trick the decompiler
into not trying to output a variable to be used as a return value
(internally, in the decompiler they still have return type `none`, but
they have `object` elsewhere).
Fixes#1703Fixes#830Fixes#928
I think this is very likely to fix
https://github.com/open-goal/jak-project/issues/2970
We had somebody report a stacktrace from the debugger, and it was
immediately after calling `gen-perms`.
I found that `gen-perms` writes past the end of a stack array during
this mission, and at the same time as the reported freezes.
I was unable to recreate the original freeze after making this change.
This PR adds a frame rate option to the graphics menu for some of the
most common refresh rates.
Jak 2 has much better support for variable frame rates than Jak 1 out of
the box, but there are still some edge cases, most prominently the fact
that sprites are still limited to the 300 tick system, which is most
noticeable on glow sprites. For this, I abused the glow boost debug
setting to scale the glow based on the frame rate.
While testing, I noticed two other cases that I have also patched,
there's likely to be many more that are yet to be found, but aside from
that, the game is playable as normal.
https://github.com/open-goal/jak-project/assets/6624576/ad4db24f-cd27-4237-a155-0db7008160f3
Tyler Wilding