Makes the glow sprite renderer flush when full capacity is reached,
instead of at the end. Also allows us to reduce the textures used for it
(finally). Worst case scenario there's 4-5 flushes per frame.
Fixes incessant flickering in the dig.
Major change to how `deftype` shows up in our code:
- the decompiler will no longer emit the `offset-assert`,
`method-count-assert`, `size-assert` and `flag-assert` parameters. There
are extremely few cases where having this in the decompiled code is
helpful, as the types there come from `all-types` which already has
those parameters. This also doesn't break type consistency because:
- the asserts aren't compared.
- the first step of the test uses `all-types`, which has the asserts,
which will throw an error if they're bad.
- the decompiler won't emit the `heap-base` parameter unless necessary
now.
- the decompiler will try its hardest to turn a fixed-offset field into
an `overlay-at` field. It falls back to the old offset if all else
fails.
- `overlay-at` now supports field "dereferencing" to specify the offset
that's within a field that's a structure, e.g.:
```lisp
(deftype foobar (structure)
((vec vector :inline)
(flags int32 :overlay-at (-> vec w))
)
)
```
in this structure, the offset of `flags` will be 12 because that is the
final offset of `vec`'s `w` field within this structure.
- **removed ID from all method declarations.** IDs are only ever
automatically assigned now. Fixes#3068.
- added an `:overlay` parameter to method declarations, in order to
declare a new method that goes on top of a previously-defined method.
Syntax is `:overlay <method-name>`. Please do not ever use this.
- added `state-methods` list parameter. This lets you quickly specify a
list of states to be put in the method table. Same syntax as the
`states` list parameter. The decompiler will try to put as many states
in this as it can without messing with the method ID order.
Also changes `defmethod` to make the first type definition (before the
arguments) optional. The type can now be inferred from the first
argument. Fixes#3093.
---------
Co-authored-by: Hat Kid <6624576+Hat-Kid@users.noreply.github.com>
Adds controller LED features to Jak 2:
- progressive flickering denoting health
- copies tomb simon says puzzle colors
- unique colors for each gun
- orange color for being indax
- yellow color for being in mech
- purple color for being darkjak
- blue color for being in board
- red flash when wanted.
May add more features later?
Also did some minor clean-up on some types.
This renames the method object in `defmethod`s to `this` and adds
detection for the `set-time!` and `time-elapsed?` macros.
Definitely my biggest PR yet...
Previously, `object` and `none` were both top-level types. This made
decompilation rather messy as they have no LCA and resulted in a lot of
variables coming out as type `none` which is very very wrong and
additionally there were plenty of casts to `object`. This changes it so
`none` becomes a child of `object` (it is still represented by
`NullType` which remains unusable in compilation).
This change makes `object` the sole top-level type, and the type that
can represent *any* GOAL object. I believe this matches the original
GOAL built-in type structure. A function that has a return type of
`object` can now return an integer or a `none` at the same time.
However, keep in mind that the return value of `(none)` is still
undefined, just as before. This also makes a cast to `object`
meaningless in 90% of the situations it showed up in (as every single
thing is already an `object`) and the decompiler will no longer emit
them. Casts to `none` are also reduced. Yay!
Additionally, state handlers also don't get the final `(none)` printed
out anymore. The return type of a state handler is completely
meaningless outside the event handler (which is return type `object`
anyway) so there are no limitations on what the last form needs to be. I
did this instead of making them return `object` to trick the decompiler
into not trying to output a variable to be used as a return value
(internally, in the decompiler they still have return type `none`, but
they have `object` elsewhere).
Fixes#1703Fixes#830Fixes#928
This PR adds detection of the `launch-particles` and `seconds-per-frame`
macros to the decompiler, removing a lot of bloat and hiding many
process register uses.
I also added `og:preserve-this` comments to as many manual patches and
comments as I could, which will soon be used in conjunction with CI to
hopefully catch any regressions in future big decomp update PRs.
I have some concerns about the `launch-particles` macro (more details in
`sparticle-launcher.gc`) , but thus far, I have not seen anything break
yet.
---------
Co-authored-by: water <awaterford111445@gmail.com>
This PR adds a frame rate option to the graphics menu for some of the
most common refresh rates.
Jak 2 has much better support for variable frame rates than Jak 1 out of
the box, but there are still some edge cases, most prominently the fact
that sprites are still limited to the 300 tick system, which is most
noticeable on glow sprites. For this, I abused the glow boost debug
setting to scale the glow based on the frame rate.
While testing, I noticed two other cases that I have also patched,
there's likely to be many more that are yet to be found, but aside from
that, the game is playable as normal.
https://github.com/open-goal/jak-project/assets/6624576/ad4db24f-cd27-4237-a155-0db7008160f3
This tries to match the original behavior of the sprite allocation
"randomness", which should reduce the number of very empty sprite blocks
sent to C++.
Some general improvements for the texture animator:
- Clouds are special cased, saving about 1 ms per frame
- Adjusting the amount of clouds now actually works.
- Fixed an issue with the brightness of clouds, and the way that they
fade out around the edges.
This changes how `BlitDisplays.cpp` works so it looks at the current
render buffer, rather than the back buffer.
This approach is a bit faster because we avoid copying the back buffer
on every single frame.
It also removes the black frames when the transition starts/stops.
The remaining issues are:
- there's still a single frame of weirdness with the sprite glow
renderer.
- when changing resolutions, it doesn't work super well.
When drawing the spinning palace, there's a terrible hack that lets some
stuff be drawn with different camera matrices.
The ocean is drawn with camera-other (which spins), but was being culled
with camera (doesn't spin). This changes ocean to use the right camera
matrix.
Note that the ocean is special when it comes to camera-other - it always
uses camera-other if there is one. Other uses are set per-level and
should already be handled correctly.
- Add security wall animation
- Add waterfall animations
- Add lava animations
- Update layer values from the game to fix the security wall
- Remove leftover debug in `level.gc` that would break level-specific
animations on the second time you visited the level
- Optionally load animated slot textures to the pool so generic can use
them (fixes skull gems in UI)
Added framework to do texture animations entirely in C++. Currently only
works on relatively simple ones, and doesn't handle updating all
parameters - only the speeds.
Connected texture animations to merc and tfrag for skull gems, dark
bomb, and scrolling conveyors.
Cleaned up Tfragment/Tfrag3, which used to be two classes. This was one
of the first C++ renderers, so it had a weird design.
Changes the DGO build order so that the city gets compiled first, and a
random guess at an "order" of which levels people might edit more often.
Most of the data-only borrow files are moved to the end as well.
Also moves around files in the `goal_src` tree to a structure that makes
a bit more sense, some files were either in the completely wrong place,
their folders had strange names, were too deep for no reason or were
just too far away from other relevant files. This structure should make
it easier to guess a file's location.
Fixes empty boxed arrays of strings breaking some decomp
(`ctywide-speech` and `race-info`).
Adds `decomp-as` tag to decompiler types so that the static data
decompiler can use macros like `meters` and `seconds` on fields that
aren't of type `meters` or `time-frame`.
Adds `override` tag to decompiler types which overrides the type of
field with that name. The type must be a child type of the original
field's type (or the same type, but why would you do this?).
Fixes the camera being offset for `drillmtn` after loading `palout`
once.
This is a huge refactor sadly.
This is a major deviation from the original game, which did not have any
way to access the nest after beating Metal Kor as the air train gets
hidden when he is beaten. This was mostly annoying because there are
precursor orbs in that level that you might miss.
This makes it so the air train can once again be used to enter the nest
even after beating Metal Kor. The rest of the level remains mostly the
same, except the Rift Ring does not spawn and an invisible wall is added
to the Metal Kor arena to prevent you from entering it as you are
normally unable to leave it anyway.
This moves the blerc math from mips2c to the Merc2 renderer, and uses
floats instead.
We could potentially do this on the GPU, which would be even faster, but
this isn't that slow in the first place.
Adds support for adding custom subtitles to Jak 2 audio. Comes with a
new editor for the new system and format. Compared to the Jak 1 system,
this is much simpler to make an editor for.
Comes with a few subtitles already made as an example.
Cutscenes are not officially supported but you can technically subtitle
those with editor, so please don't right now.
This new system supports multiple subtitles playing at once (even from a
single source!) and will smartly push the subtitles up if there's a
message already playing:
Unlike in Jak 1, it will not hide the bottom HUD when subtitles are
active:
Sadly this leaves us with not much space for the subtitle region (and
the subtitles are shrunk when the minimap is enabled) but when you have
guards and citizens talking all the time, hiding the HUD every time
anyone spoke would get really frustrating.
The subtitle speaker is also color-coded now, because I thought that
would be fun to do.
TODO:
- [x] proper cutscene support.
- [x] merge mode for cutscenes so we don't have to rewrite the script?
---------
Co-authored-by: Hat Kid <6624576+Hat-Kid@users.noreply.github.com>
ManDude
