For dualsense controllers, when the game exits we explicitly clear any
trigger effects. This was happening after SDL was already terminated, so
the hardware handles were already lost.
From a practical standpoint though, this mostly just cleans up logs.
This PR updates to SDL3, and with it, adds a handful of new features.
Everything seems to work but I'm going to look over the code once last
time before merging, some of the API changes are hard to spot.
Fixes#2773
### Pressure sensitivity support for DS3 Controllers
SDL3 adds pressure sensitivity support for DS3 controllers on windows. I
have not tested on linux. The option is disabled by default.
On windows you will need https://docs.nefarius.at/projects/DsHidMini/
and to be using SXS mode.
### DualSense and Xbox One Trigger Effects
If enabled, Jak 2 will have certain trigger effects. They are:
- xbox1:
- small vibrate when collecting dark eco
- big vibrate when changing to dark jak
- vibrate when shooting gun, proportional to gun type
- ps5:
- resistance when changing to dark jak
- different gun shooting effects
- red (resistance)
- yellow (weapon trigger)
- blue (vibrates)
- purple (less resistance)
> **Gun Shooting effects are only enabled if the new "Swap R1 and R2"
option is enabled**
There are more effects that could be used in `dualsense_effects.cpp`,
but I only exposed the ones I needed to OpenGOAL. If a modder wants to
use some of the others and wires them up end-to-end, please consider
contributing that upstream.
### New ImGUI Menu
Added new imgui options for selecting the active controller, for those
people that struggle to select the initial controller.
### Testing
The highlights of what I tested successfully:
- display
- [x] all mode switch permutations
- [x] launch with all modes saved
- [x] switch monitors / unplug monitor that was active, how does it
handle it
- [x] load with alternate monitor saved and all modes
- [x] allowing hidpi doesnt break macos
- controls
- [x] keyboard and mouse still work
- [x] pressure sensitivity on linux
The fundamental issue is related to hiDPI / Retina displays, I don't
think our rendering code is setup properly to handle the scaling between
the two (which you can derive by comparing `SDL_GetWindowSize` and
`SDL_GL_GetDrawableSize`).
So rather than opening that can of worms, I just removed the window
flag.
Also fixed an unrelated issue for displaying resolution options when in
windowed mode, it was previously only adding options to the list if they
were invalid for full-screen.
Fixes#3099
- Can make the event buffer larger or smaller
- UI shows the current event index / size, so you know how fast it's
filling up
- Can save compressed, 10x reduction in filesize and Windows 11 explorer
actually supports ZSTD natively now so this isn't inconvenient at all
> An example of almost 1 million events. Results in a 4mb file.
This includes all the collision stuff needed to spawn `target`,
decompiles the sparticle code and adds some of the PC hacks needed for
merc to run (it doesn't work quite right and looks bad, likely due to a
combination of code copied from Jak 2 and the time of day hacks).
There are a bunch of temporary hacks (see commits) in place to prevent
the game from crashing quite as much, but it is still extremely prone to
doing so due to lots of missing functions/potentially bad decomp.
---------
Co-authored-by: water <awaterford111445@gmail.com>
This updates `fmt` to the latest version and moves to just being a copy
of their repo to make updating easier (no editing their cmake / figuring
out which files to minimally include).
The motivation for this is now that we switched to C++ 20, there were a
ton of deprecated function usages that is going away in future compiler
versions. This gets rid of all those warnings.
While trying to narrow down why sometimes SDL takes 20-40seconds to
initialize I built up some more profiling features.
TLDR - I still don't know why SDL is taking a long time but I've
narrowed it down to it initializing the `GAME_CONTROLLER` subsystem.
This isn't unprecedented, I found numerous github issues and articles
suggesting this is the problem:
I imagine it is hardware/OS related on some level, there are even some
recent commits in SDL that have made it worse on certain platforms. I've
had this problem myself so I will hope to get it again soon so i can
debug where in the SDL code the delay occurs and make a proper bug
report. Hopefully this helps but it's not yet confirmed -
https://github.com/open-goal/jak-project/pull/3384
The main thing that was done here was to slightly modify the new
subtitle-v2 JSON schema to be more similar to the existing one so that
it can properly be used in Crowdin.
Draft while I double-check the diff myself
Along the way the following was also done (among other things):
- got rid of as much duplication as was feasible in the serialization
and editor code
- separated the text serialization code from the subtitle code for
better organization
- simplified "base language" in the editor. The new subtitle format has
built-in support for defining a base language so the editor doesn't have
to be used as a crutch. Also, cutscenes only defined in the base come
first in the list now as that is generally the order you'd work from
(what you havn't done first)
- got rid of the GOAL subtitle format code completely
- switched jak 2 text translations to the JSON format as well
- found a few mistakes in the jak 1 subtitle metadata files
- added a couple minor features to the editor
- consolidate and removed complexity, ie. recently all jak 1 hints were
forced to the `named` type, so I got rid of the two types as there isn't
a need anymore.
- removed subtitle editor groups for jak 1, the only reason they existed
was so when the GOAL file was manually written out they were somewhat
organized, the editor has a decent filter control, there's no need for
them.
- removed the GOAL -> JSON python script helper, it's been a month or so
and no one has come forward with existing translations that they need
help with migrating. If they do need it, the script will be in the git
history.
I did some reasonably through testing in Jak1/Jak 2 and everything
seemed to work. But more testing is always a good idea.
---------
Co-authored-by: ManDude <7569514+ManDude@users.noreply.github.com>
## Problem
OpenGOAL uses OpenGL 4.3.
Apple stopped upgrading OpenGL after 4.1, so the way OpenGOAL currently
works will never be playable on Macs using OpenGL.
## Solution
Luckily, downgrading to OpenGL 4.1 is not a huge change (at least it
doesn't seem like it to my untrained eyes).
## Changes
* set hints for OpenGL 4.1 instead of 4.3 for __APPLE__
* skip the OpenGL debugging callback setup for macOS (requires 4.3)
* bump down the version string for all shaders
* stop using the `binding` layout qualifier in shader code
* move the `flat` qualifier first (not sure if this is a 4.1 thing or
just Macs being more strict)
* don't mix signed and unsigned ints in shaders (not sure if this is a
4.1 thing or just Macs being more strict)
* add some hacky CPP to the Shader constructor for binding texture units
and bones buffers based on variable names in the shader code
## Results
The current event-based approach is very difficult to get right, and it
depends on no events ever being missed. This changes the keyboard/mouse
handling code to a polling-based approach.
Other fixes:
- an issue where modifier keys were not able to be successfully bound
(like Left Shift to `X`)
- improves cursor hiding (except when you use the start menu, this seems
like an SDL issue, see comment)
- Better discarding of kb/mouse inputs when imgui intercepts input
- properly swap bindings when an already set key is assigned, even if it
crosses the distinction of an analog vs normal button
Fixes#2800
Trying to make up for some of the startup speed lost in the SDL
transition. This saves about 1s from start (from ~3s), and about 500 MB
of RAM.
- Faster TIE unpack by merging matrix groups, more efficient vertex
transforms, and skipping normal transforms on groups with no normals.
- Refactor generic merc and merc to use a single renderer with multiple
interfaces, rather than many renderers. Removed "LightningRenderer" as a
special thing, but Warp is still special
- Add more profiling stuff to startup and the loader.
- Remove `SDL_INIT_HAPTIC` - this turned out to be needed for
force-feedback steering wheels, and not needed for controller vibration
- Switched `vag-player` to use quicksort instead of the default GOAL
sort (very slow)
This moves the blerc math from mips2c to the Merc2 renderer, and uses
floats instead.
We could potentially do this on the GPU, which would be even faster, but
this isn't that slow in the first place.
Adds support for adding custom subtitles to Jak 2 audio. Comes with a
new editor for the new system and format. Compared to the Jak 1 system,
this is much simpler to make an editor for.
Comes with a few subtitles already made as an example.
Cutscenes are not officially supported but you can technically subtitle
those with editor, so please don't right now.
This new system supports multiple subtitles playing at once (even from a
single source!) and will smartly push the subtitles up if there's a
message already playing:
Unlike in Jak 1, it will not hide the bottom HUD when subtitles are
active:
Sadly this leaves us with not much space for the subtitle region (and
the subtitles are shrunk when the minimap is enabled) but when you have
guards and citizens talking all the time, hiding the HUD every time
anyone spoke would get really frustrating.
The subtitle speaker is also color-coded now, because I thought that
would be fun to do.
TODO:
- [x] proper cutscene support.
- [x] merge mode for cutscenes so we don't have to rewrite the script?
---------
Co-authored-by: Hat Kid <6624576+Hat-Kid@users.noreply.github.com>
Disables the fog hack for Jak 2, where it's not useful and kind of
breaks in most levels which rely on dark vertices that aren't underwater
(e.g. city windows).
This way a user can take multiple data samples from one/multiple play
sessions quickly. Creates a directory called profile_data that is added
to gitignore to place the data in, and checks to see if a file is there
and if so it creates prof1.json prof2.json prof3.json and so on...
Adds the `pckernel` system to Jak 2, allowing you to do the PC-specific
things that Jak 1 lets you do like change game resolution, etc.
In other to reduce the amount of code duplication for something that
we're gonna be changing a lot over time, I split it into a few more code
files. In this new system, `pckernel-h.gc`, `pckernel-common.gc`
(previously `pckernel.gc`) and `pc-debug-common.gc` are the files that
should be shared across all games (I hacked the Jak 2 project to pull
these files from the Jak 1 folder), while `pckernel-impl.gc`,
`pckernel.gc` and `pc-debug-methods.gc` are their respective
game-specific counterparts that should be loaded after. I'm not fully
happy with this, I think it's slightly messy, but it cleanly separates
code that should be game-specific and not accidentally copied around and
code that should be the same for all games anyway.
Add a debug window for the loader to show levels and fix an issue with
jak 2 level unloading. I never really thought about how this works for >
2 levels, and there is a chance that you could unload the wrong level in
some cases.
The problem is some combination of merc-only levels not counting toward
the "in use" detection, and the unloader ignoring what the game wants to
load.
I don't remember why using merc models doesn't contribute to "in use"
but I'm afraid to change this for jak 1. Instead, we can have the
unloader avoid unloading levels that the game is telling us are loaded.
This is what we should have done originally, but there was a time when
Jak 1 didn't tell the loader anything, and we had this stupid detection
thing.
I think this is the first step toward just getting rid of the "in use"
detection and trusting the game for everything.
This adds a new ImGUI menu to help filter out the clutter on screen.
https://user-images.githubusercontent.com/13153231/210192912-b1c28319-bacb-449c-ad7f-e7308fb75f50.mp4
This also:
- moves the imgui display bool into a game specific config file (you can
hide it in jak1, and not in jak2)
- the config file also persists the settings from this menu (except the
filters for now, future TODO)
- there is a new `ignore_imgui_hide_keybind` in this file to ignore
hiding it when you press Alt
A few issues:
- lwidea's fr3 is getting loaded and unloaded all the time
- the debug line drawing clipping is wrong (doesn't seem wrong in pcsx2,
so I think this is on us)
- nothing actually using vis data yet
- at a large distance, our view frustum culling seems slightly too
aggressive (might be that viewport scissoring is wrong)
- in the city, things seem darker as you move away. unclear how this is
happening (fog?)
* Added screenshot hotkey and added a toggle to debug GUI to disable screenshot hotkey (#1765)
* Renamed gfx_dumps folder to screenshots and screenshots taken with hotkey now use game render options not debug gui screenshot render options (#1765)
* Updated get current timestamp to use strftime
* fixed clang formating errors for screenshot hotkey
Co-authored-by: sardap <sardap@users.noreply.github.com>
* scripts: remove references to non-existent script
* game: fix transition from fullscreen (not borderless) to windowed
* game: ensure window is position away from the corner of the display when switching from fullscreen
* game: restore windowed mode settings properly
* game: use the game version for saving settings/saves
* game: prevent windowed mode from being auto-centered on initial init
* game: save and restore window coordinates
* lint: formatting
Tyler Wilding
