mirror of
https://github.com/open-goal/jak-project
synced 2026-08-12 03:49:08 -04:00
Alexander J. Semenuk
5d5e35fb9b
## Problem Windows builds break with a current local toolchain (Scoop LLVM 22.1.8, CMake 4.4.0, VS 2026), in two independent ways: 1. The build stops at curl's deliberate guard: `#error "no non-blocking method was found/used/set"` in `third-party/curl/lib/nonblock.c`. 2. From the second configure onward, `cmake --build` re-runs CMake in an endless loop (observed 42 consecutive reconfigure cycles in a single build). Likely the same mechanism behind the "endlessly building" VS 2026 note in `docs/setup/dev/vs.md`. ## Root cause 1. `third-party/curl/CMake/CurlTests.c` passes `int *` to `ioctlsocket()`, whose third parameter is `u_long *`. Clang 22 promotes `-Wincompatible-pointer-types` to a hard error in C, so the `HAVE_IOCTLSOCKET_FIONBIO` try_compile silently fails and `curl_config.h` never defines it. Upstream CI does not see this because the windows-2022 runner image ships an older LLVM. GCC 14 promotes the same warning to a hard error, which is very likely the `CurlTests.c.obj` failure reported from MSYS2 in open-goal/jak-project#3551. Upstream curl hit the identical problem with GCC 14 and fixed the probe in curl 8.8.0 (curl/curl#13578). 2. The root CMakeLists copies the build tree's `compile_commands.json` into `<src>/build/` for clangd using `configure_file()`, which registers its input as a configure dependency. CMake rewrites `compile_commands.json` late in every generation, after `CTestTestfile.cmake` and `cmake_install.cmake` (outputs of the same Ninja regen rule), so once the dependency is registered the rule is deterministically dirty and every `ninja` invocation re-runs CMake. A pristine first configure is safe (the file does not exist yet, so the `if(EXISTS ...)` guard skips the copy), which is why the loop looks machine- or IDE-specific. ## Fix 1. Per review, re-vendor `third-party/curl` at the `curl-8_21_0` tag (previously `curl-8_3_0`), which carries the upstream probe fix plus two years of upstream development; `vendor.yaml` updated to match. Adjustments the version jump forced: - curl 8.15 removed the native macOS Secure Transport backend (`CURL_USE_SECTRANSP`), so macOS now builds curl against OpenSSL like Linux. The two macOS workflows install Homebrew `openssl@3` and export `OPENSSL_ROOT_DIR` (keg-only), and the macOS setup docs gained the same two lines. - `CURL_BROTLI` / `CURL_ZSTD` switched to AUTO-detection in curl 8.10; pinned OFF to keep the previous no-compression behavior and avoid silently linking whatever the CI images happen to have. - curl's new top-level `BUILD_EXAMPLES` cache option (default ON) leaked into discord-rpc's identically named option and broke configure at a nonexistent `examples/send-presence` directory; pinned OFF ahead of the third-party subdirectories. The diff is dominated by the mechanical tag-tree swap under `third-party/curl` (linguist-vendored, collapsed in review). The hand-written changes are `CMakeLists.txt`, the two macOS workflows, `docs/setup/system/macos.md`, and `vendor.yaml`. 2. Swap `configure_file()` for `file(COPY ...)`: the same clangd copy with no configure dependency registered. (`file(COPY_FILE ... ONLY_IF_DIFFERENT)` would be cleaner still but requires CMake 3.21, above the declared `cmake_minimum_required(VERSION 3.10)`.) ## Test plan - [x] Fresh `cmake --preset Release-windows-clang` (LLVM 22, no cache seeding) completes and logs `Enabled SSL backends: Schannel`; the FIONBIO probe passes without the previous `#error` - [x] Full Windows Release build from scratch in the branch worktree (all 1422 targets) - [x] goalc-test suite: 1509 passed, 0 failed - [x] Second consecutive configure with `compile_commands.json` present: the regen rule in `build.ninja` has no `compile_commands.json` input; `<src>/build/compile_commands.json` is still refreshed for clangd - [x] Repeated `ninja` invocations after a full build no longer re-run CMake - [x] macOS Intel and ARM CI green (first exercise of the OpenSSL backend switch) --- I work off a self-hosted forge, so this GitHub account is quiet; the configure logs and ninja dirty-node traces from the investigation are available if anyone wants the raw data. (AI-assisted)
91 lines
3.2 KiB
C
Vendored
Generated
91 lines
3.2 KiB
C
Vendored
Generated
/***************************************************************************
|
|
* _ _ ____ _
|
|
* Project ___| | | | _ \| |
|
|
* / __| | | | |_) | |
|
|
* | (__| |_| | _ <| |___
|
|
* \___|\___/|_| \_\_____|
|
|
*
|
|
* Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
|
|
*
|
|
* This software is licensed as described in the file COPYING, which
|
|
* you should have received as part of this distribution. The terms
|
|
* are also available at https://curl.se/docs/copyright.html.
|
|
*
|
|
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
|
|
* copies of the Software, and permit persons to whom the Software is
|
|
* furnished to do so, under the terms of the COPYING file.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
* SPDX-License-Identifier: curl
|
|
*
|
|
***************************************************************************/
|
|
#include "unitcheck.h"
|
|
|
|
#ifdef HAVE_NETINET_IN_H
|
|
#include <netinet/in.h>
|
|
#endif
|
|
#ifdef HAVE_NETINET_IN6_H
|
|
#include <netinet/in6.h>
|
|
#endif
|
|
|
|
#include "cf-socket.h"
|
|
|
|
static CURLcode t1663_setup(void)
|
|
{
|
|
CURLcode result = CURLE_OK;
|
|
global_init(CURL_GLOBAL_ALL);
|
|
return result;
|
|
}
|
|
|
|
static void t1663_parse(const char *input_data,
|
|
const char *exp_dev,
|
|
const char *exp_iface,
|
|
const char *exp_host,
|
|
CURLcode result_exp)
|
|
{
|
|
char *dev = NULL;
|
|
char *iface = NULL;
|
|
char *host = NULL;
|
|
CURLcode result = Curl_parse_interface(input_data, &dev, &iface, &host);
|
|
fail_unless(result == result_exp, "Curl_parse_interface() failed");
|
|
|
|
fail_unless(!!exp_dev == !!dev, "dev expectation failed.");
|
|
fail_unless(!!exp_iface == !!iface, "iface expectation failed");
|
|
fail_unless(!!exp_host == !!host, "host expectation failed");
|
|
|
|
if(!unitfail) {
|
|
fail_unless(!dev || !exp_dev || !strcmp(dev, exp_dev),
|
|
"dev should be equal to exp_dev");
|
|
fail_unless(!iface || !exp_iface || !strcmp(iface, exp_iface),
|
|
"iface should be equal to exp_iface");
|
|
fail_unless(!host || !exp_host || !strcmp(host, exp_host),
|
|
"host should be equal to exp_host");
|
|
}
|
|
|
|
curlx_free(dev);
|
|
curlx_free(iface);
|
|
curlx_free(host);
|
|
}
|
|
|
|
static CURLcode test_unit1663(const char *arg)
|
|
{
|
|
UNITTEST_BEGIN(t1663_setup())
|
|
|
|
t1663_parse("dev", "dev", NULL, NULL, CURLE_OK);
|
|
t1663_parse("if!eth0", NULL, "eth0", NULL, CURLE_OK);
|
|
t1663_parse("host!myname", NULL, NULL, "myname", CURLE_OK);
|
|
t1663_parse("ifhost!eth0!myname", NULL, "eth0", "myname", CURLE_OK);
|
|
t1663_parse("", NULL, NULL, NULL, CURLE_BAD_FUNCTION_ARGUMENT);
|
|
t1663_parse("!", "!", NULL, NULL, CURLE_OK);
|
|
t1663_parse("if!", NULL, NULL, NULL, CURLE_BAD_FUNCTION_ARGUMENT);
|
|
t1663_parse("if!eth0!blubb", NULL, "eth0!blubb", NULL, CURLE_OK);
|
|
t1663_parse("host!", NULL, NULL, NULL, CURLE_BAD_FUNCTION_ARGUMENT);
|
|
t1663_parse("ifhost!", NULL, NULL, NULL, CURLE_BAD_FUNCTION_ARGUMENT);
|
|
t1663_parse("ifhost!eth0", NULL, NULL, NULL, CURLE_BAD_FUNCTION_ARGUMENT);
|
|
t1663_parse("ifhost!eth0!", NULL, NULL, NULL, CURLE_BAD_FUNCTION_ARGUMENT);
|
|
|
|
UNITTEST_END(curl_global_cleanup())
|
|
}
|