mirror/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

staging: et131x: Fix whitespace - alignment matching open parenthesis

Browse Source 
Fix occurrences in et131x.c of:

CHECK: Alignment should match open parenthesis

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Mark Einon
2014-09-03 22:40:57 +01:00
committed by Greg Kroah-Hartman
parent bbf45bcfda
commit 096e622438
1 changed files with 67 additions and 63 deletions
Download Patch File Download Diff File Expand all files Collapse all files

130
drivers/staging/et131x/et131x.c
View File

@@ -594,11 +594,11 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data)
* byte addressing).
*/
if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER,
LBCIF_CONTROL_LBCIF_ENABLE | LBCIF_CONTROL_I2C_WRITE))
LBCIF_CONTROL_LBCIF_ENABLE |
LBCIF_CONTROL_I2C_WRITE))
return -EIO;
/* Prepare EEPROM address for Step 3 */
for (retries = 0; retries < MAX_NUM_WRITE_RETRIES; retries++) {
/* Write the address to the LBCIF Address Register */
if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER, addr))
@@ -654,7 +654,7 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data)
while (1) {
if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER,
LBCIF_CONTROL_LBCIF_ENABLE))
LBCIF_CONTROL_LBCIF_ENABLE))
writeok = 0;
/* Do read until internal ACK_ERROR goes away meaning write
@@ -666,7 +666,8 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data)
addr);
do {
pci_read_config_dword(pdev,
LBCIF_DATA_REGISTER, &val);
LBCIF_DATA_REGISTER,
&val);
} while ((val & 0x00010000) == 0);
} while (val & 0x00040000);
@@ -747,7 +748,7 @@ static int et131x_init_eeprom(struct et131x_adapter *adapter)
*/
if (pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, &eestatus)) {
dev_err(&pdev->dev,
"Could not read PCI config space for EEPROM Status\n");
"Could not read PCI config space for EEPROM Status\n");
return -EIO;
}
@@ -771,7 +772,8 @@ static int et131x_init_eeprom(struct et131x_adapter *adapter)
}
if (pdev->revision != 0x01 || write_failed) {
dev_err(&pdev->dev,
"Fatal EEPROM Status Error - 0x%04x\n", eestatus);
"Fatal EEPROM Status Error - 0x%04x\n",
eestatus);
/* This error could mean that there was an error
* reading the eeprom or that the eeprom doesn't exist.
@@ -829,7 +831,7 @@ static void et131x_rx_dma_enable(struct et131x_adapter *adapter)
csr = readl(&adapter->regs->rxdma.csr);
if (csr & ET_RXDMA_CSR_HALT_STATUS) {
dev_err(&adapter->pdev->dev,
"RX Dma failed to exit halt state. CSR 0x%08x\n",
"RX Dma failed to exit halt state. CSR 0x%08x\n",
csr);
}
}
@@ -850,8 +852,8 @@ static void et131x_rx_dma_disable(struct et131x_adapter *adapter)
csr = readl(&adapter->regs->rxdma.csr);
if (!(csr & ET_RXDMA_CSR_HALT_STATUS))
dev_err(&adapter->pdev->dev,
"RX Dma failed to enter halt state. CSR 0x%08x\n",
csr);
"RX Dma failed to enter halt state. CSR 0x%08x\n",
csr);
}
}
@@ -865,8 +867,8 @@ static void et131x_tx_dma_enable(struct et131x_adapter *adapter)
/* Setup the transmit dma configuration register for normal
* operation
*/
writel(ET_TXDMA_SNGL_EPKT|(PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT),
&adapter->regs->txdma.csr);
writel(ET_TXDMA_SNGL_EPKT | (PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT),
&adapter->regs->txdma.csr);
}
static inline void add_10bit(u32 *v, int n)
@@ -976,7 +978,7 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter)
/* Initialize loop back to off */
cfg1 &= ~(ET_MAC_CFG1_LOOPBACK | ET_MAC_CFG1_RX_FLOW);
if (adapter->flowcontrol == FLOW_RXONLY ||
adapter->flowcontrol == FLOW_BOTH)
adapter->flowcontrol == FLOW_BOTH)
cfg1 |= ET_MAC_CFG1_RX_FLOW;
writel(cfg1, &mac->cfg1);
@@ -1010,8 +1012,8 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter)
if (delay == 100) {
dev_warn(&adapter->pdev->dev,
"Syncd bits did not respond correctly cfg1 word 0x%08x\n",
cfg1);
"Syncd bits did not respond correctly cfg1 word 0x%08x\n",
cfg1);
}
/* Enable txmac */
@@ -1276,7 +1278,7 @@ static void et1310_config_macstat_regs(struct et131x_adapter *adapter)
* @value: pointer to a 16-bit value in which the value will be stored
*/
static int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr,
u8 reg, u16 *value)
u8 reg, u16 *value)
{
struct mac_regs __iomem *mac = &adapter->regs->mac;
int status = 0;
@@ -1308,9 +1310,9 @@ static int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr,
/* If we hit the max delay, we could not read the register */
if (delay == 50) {
dev_warn(&adapter->pdev->dev,
"reg 0x%08x could not be read\n", reg);
"reg 0x%08x could not be read\n", reg);
dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
mii_indicator);
mii_indicator);
status = -EIO;
goto out;
@@ -1385,11 +1387,11 @@ static int et131x_mii_write(struct et131x_adapter *adapter, u8 addr, u8 reg,
u16 tmp;
dev_warn(&adapter->pdev->dev,
"reg 0x%08x could not be written", reg);
"reg 0x%08x could not be written", reg);
dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
mii_indicator);
mii_indicator);
dev_warn(&adapter->pdev->dev, "command is 0x%08x\n",
readl(&mac->mii_mgmt_cmd));
readl(&mac->mii_mgmt_cmd));
et131x_mii_read(adapter, reg, &tmp);
@@ -1857,7 +1859,7 @@ static void et131x_tx_dma_disable(struct et131x_adapter *adapter)
{
/* Setup the transmit dma configuration register */
writel(ET_TXDMA_CSR_HALT | ET_TXDMA_SNGL_EPKT,
&adapter->regs->txdma.csr);
&adapter->regs->txdma.csr);
}
/* et131x_enable_txrx - Enable tx/rx queues */
@@ -2092,7 +2094,8 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
GFP_KERNEL);
if (!fbr->ring_virtaddr) {
dev_err(&adapter->pdev->dev,
"Cannot alloc memory for Free Buffer Ring %d\n", id);
"Cannot alloc memory for Free Buffer Ring %d\n",
id);
return -ENOMEM;
}
}
@@ -2151,7 +2154,7 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
if (!rx_ring->ps_ring_virtaddr) {
dev_err(&adapter->pdev->dev,
"Cannot alloc memory for Packet Status Ring\n");
"Cannot alloc memory for Packet Status Ring\n");
return -ENOMEM;
}
@@ -2168,7 +2171,7 @@ static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
GFP_KERNEL);
if (!rx_ring->rx_status_block) {
dev_err(&adapter->pdev->dev,
"Cannot alloc memory for Status Block\n");
"Cannot alloc memory for Status Block\n");
return -ENOMEM;
}
rx_ring->num_rfd = NIC_DEFAULT_NUM_RFD;
@@ -2242,8 +2245,8 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
rx_ring->psr_num_entries;
dma_free_coherent(&adapter->pdev->dev, pktstat_ringsize,
rx_ring->ps_ring_virtaddr,
rx_ring->ps_ring_physaddr);
rx_ring->ps_ring_virtaddr,
rx_ring->ps_ring_physaddr);
rx_ring->ps_ring_virtaddr = NULL;
}
@@ -2251,8 +2254,9 @@ static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
/* Free area of memory for the writeback of status information */
if (rx_ring->rx_status_block) {
dma_free_coherent(&adapter->pdev->dev,
sizeof(struct rx_status_block),
rx_ring->rx_status_block, rx_ring->rx_status_bus);
sizeof(struct rx_status_block),
rx_ring->rx_status_block,
rx_ring->rx_status_bus);
rx_ring->rx_status_block = NULL;
}
@@ -2345,7 +2349,7 @@ static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd)
writel(free_buff_ring, offset);
} else {
dev_err(&adapter->pdev->dev,
"%s illegal Buffer Index returned\n", __func__);
"%s illegal Buffer Index returned\n", __func__);
}
/* The processing on this RFD is done, so put it back on the tail of
@@ -2738,19 +2742,19 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb)
} else {
desc[frag].len_vlan = skb_headlen(skb) / 2;
dma_addr = dma_map_single(&adapter->pdev->dev,
skb->data,
(skb_headlen(skb) / 2),
DMA_TO_DEVICE);
skb->data,
(skb_headlen(skb) / 2),
DMA_TO_DEVICE);
desc[frag].addr_lo = lower_32_bits(dma_addr);
desc[frag].addr_hi = upper_32_bits(dma_addr);
frag++;
desc[frag].len_vlan = skb_headlen(skb) / 2;
dma_addr = dma_map_single(&adapter->pdev->dev,
skb->data +
(skb_headlen(skb) / 2),
(skb_headlen(skb) / 2),
DMA_TO_DEVICE);
skb->data +
(skb_headlen(skb) / 2),
(skb_headlen(skb) / 2),
DMA_TO_DEVICE);
desc[frag].addr_lo = lower_32_bits(dma_addr);
desc[frag].addr_hi = upper_32_bits(dma_addr);
frag++;
@@ -2804,7 +2808,7 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb)
add_10bit(&tx_ring->send_idx, thiscopy);
if (INDEX10(tx_ring->send_idx) == 0 ||
INDEX10(tx_ring->send_idx) == NUM_DESC_PER_RING_TX) {
INDEX10(tx_ring->send_idx) == NUM_DESC_PER_RING_TX) {
tx_ring->send_idx &= ~ET_DMA10_MASK;
tx_ring->send_idx ^= ET_DMA10_WRAP;
}
@@ -2947,7 +2951,7 @@ static int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev)
* netif layer think we're good and drop the packet
*/
if ((adapter->flags & FMP_ADAPTER_FAIL_SEND_MASK) ||
!netif_carrier_ok(netdev)) {
!netif_carrier_ok(netdev)) {
dev_kfree_skb_any(skb);
skb = NULL;
@@ -2975,7 +2979,7 @@ static int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev)
* Assumption - Send spinlock has been acquired
*/
static inline void free_send_packet(struct et131x_adapter *adapter,
struct tcb *tcb)
struct tcb *tcb)
{
unsigned long flags;
struct tx_desc *desc = NULL;
@@ -3358,7 +3362,7 @@ static void et131x_hwaddr_init(struct et131x_adapter *adapter)
* address into the permanent address
*/
memcpy(adapter->rom_addr,
adapter->addr, ETH_ALEN);
adapter->addr, ETH_ALEN);
} else {
/* We do not have an override address, so set the
* current address to the permanent address and add
@@ -3399,15 +3403,15 @@ static int et131x_pci_init(struct et131x_adapter *adapter,
static const u16 replay[2] = { 0x1E0, 0x2ED };
if (pci_write_config_word(pdev, ET1310_PCI_ACK_NACK,
acknak[max_payload])) {
acknak[max_payload])) {
dev_err(&pdev->dev,
"Could not write PCI config space for ACK/NAK\n");
"Could not write PCI config space for ACK/NAK\n");
goto err_out;
}
if (pci_write_config_word(pdev, ET1310_PCI_REPLAY,
replay[max_payload])) {
replay[max_payload])) {
dev_err(&pdev->dev,
"Could not write PCI config space for Replay Timer\n");
"Could not write PCI config space for Replay Timer\n");
goto err_out;
}
}
@@ -3417,7 +3421,7 @@ static int et131x_pci_init(struct et131x_adapter *adapter,
*/
if (pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11)) {
dev_err(&pdev->dev,
"Could not write PCI config space for Latency Timers\n");
"Could not write PCI config space for Latency Timers\n");
goto err_out;
}
@@ -3438,7 +3442,7 @@ static int et131x_pci_init(struct et131x_adapter *adapter,
for (i = 0; i < ETH_ALEN; i++) {
if (pci_read_config_byte(pdev, ET1310_PCI_MAC_ADDRESS + i,
adapter->rom_addr + i)) {
adapter->rom_addr + i)) {
dev_err(&pdev->dev, "Could not read PCI config space for MAC address\n");
goto err_out;
}
@@ -3510,7 +3514,7 @@ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter)
status = et131x_tx_dma_memory_alloc(adapter);
if (status) {
dev_err(&adapter->pdev->dev,
"et131x_tx_dma_memory_alloc FAILED\n");
"et131x_tx_dma_memory_alloc FAILED\n");
et131x_tx_dma_memory_free(adapter);
return status;
}
@@ -3518,7 +3522,7 @@ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter)
status = et131x_rx_dma_memory_alloc(adapter);
if (status) {
dev_err(&adapter->pdev->dev,
"et131x_rx_dma_memory_alloc FAILED\n");
"et131x_rx_dma_memory_alloc FAILED\n");
et131x_adapter_memory_free(adapter);
return status;
}
@@ -3558,7 +3562,7 @@ static void et131x_adjust_link(struct net_device *netdev)
u16 register18;
et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
&register18);
&register18);
et131x_mii_write(adapter, phydev->addr,
PHY_MPHY_CONTROL_REG, register18 | 0x4);
et131x_mii_write(adapter, phydev->addr, PHY_INDEX_REG,
@@ -3591,15 +3595,15 @@ static void et131x_adjust_link(struct net_device *netdev)
u16 register18;
et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
&register18);
&register18);
et131x_mii_write(adapter, phydev->addr,
PHY_MPHY_CONTROL_REG, register18 | 0x4);
PHY_MPHY_CONTROL_REG, register18 | 0x4);
et131x_mii_write(adapter, phydev->addr,
PHY_INDEX_REG, register18 | 0x8402);
PHY_INDEX_REG, register18 | 0x8402);
et131x_mii_write(adapter, phydev->addr,
PHY_DATA_REG, register18 | 511);
PHY_DATA_REG, register18 | 511);
et131x_mii_write(adapter, phydev->addr,
PHY_MPHY_CONTROL_REG, register18);
PHY_MPHY_CONTROL_REG, register18);
}
/* Free the packets being actively sent & stopped */
@@ -3861,8 +3865,8 @@ static irqreturn_t et131x_isr(int irq, void *dev_id)
u32 txdma_err = readl(&iomem->txdma.tx_dma_error);
dev_warn(&adapter->pdev->dev,
"TXDMA_ERR interrupt, error = %d\n",
txdma_err);
"TXDMA_ERR interrupt, error = %d\n",
txdma_err);
}
/* Handle Free Buffer Ring 0 and 1 Low interrupt */
@@ -3925,8 +3929,8 @@ static irqreturn_t et131x_isr(int irq, void *dev_id)
/* TRAP();*/
dev_warn(&adapter->pdev->dev,
"RxDMA_ERR interrupt, error %x\n",
readl(&iomem->txmac.tx_test));
"RxDMA_ERR interrupt, error %x\n",
readl(&iomem->txmac.tx_test));
}
/* Handle the Wake on LAN Event */
@@ -4319,9 +4323,9 @@ static void et131x_tx_timeout(struct net_device *netdev)
flags);
dev_warn(&adapter->pdev->dev,
"Send stuck - reset. tcb->WrIndex %x, flags 0x%08x\n",
tcb->index,
tcb->flags);
"Send stuck - reset. tcb->WrIndex %x, flags 0x%08x\n",
tcb->index,
tcb->flags);
adapter->netdev->stats.tx_errors++;
@@ -4361,7 +4365,7 @@ static int et131x_change_mtu(struct net_device *netdev, int new_mtu)
result = et131x_adapter_memory_alloc(adapter);
if (result != 0) {
dev_warn(&adapter->pdev->dev,
"Change MTU failed; couldn't re-alloc DMA memory\n");
"Change MTU failed; couldn't re-alloc DMA memory\n");
return result;
}
@@ -4500,7 +4504,7 @@ static int et131x_pci_setup(struct pci_dev *pdev,
adapter->mii_bus->name = "et131x_eth_mii";
snprintf(adapter->mii_bus->id, MII_BUS_ID_SIZE, "%x",
(adapter->pdev->bus->number << 8) | adapter->pdev->devfn);
(adapter->pdev->bus->number << 8) | adapter->pdev->devfn);
adapter->mii_bus->priv = netdev;
adapter->mii_bus->read = et131x_mdio_read;
adapter->mii_bus->write = et131x_mdio_write;