arm64: dts: qcom: Add device tree for Motorola Moto G4 Play (harpia)
Motorola Moto G4 Play is an msm8916 based smartphone. Supported features: - eMMC and SD; - Buttons; - Touchscreen; - USB; - Fuel Gauge; - Sound; - Accelerometer. msm8916 Moto devices share significant portion of the design so the common parts are separated into a common dtsi. Signed-off-by: Ruby Iris Juric <ruby@srxl.me> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> [Nikita: Split up to common dtsi] Signed-off-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240405-msm8916-moto-init-v1-2-502b58176d34@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Ruby Iris Juric
committed by
Bjorn Andersson
Bjorn Andersson
parent
e4558fcfbe
commit
65321d09e3
@@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-gplus-fl8005a.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8910.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-motorola-harpia.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb
|
||||
|
||||
161
arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi
Normal file
161
arch/arm64/boot/dts/qcom/msm8916-motorola-common.dtsi
Normal file
@@ -0,0 +1,161 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
#include "msm8916-pm8916.dtsi"
|
||||
#include "msm8916-modem-qdsp6.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
mmc0 = &sdhc_1; /* eMMC */
|
||||
mmc1 = &sdhc_2; /* SD card */
|
||||
serial0 = &blsp_uart1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&gpio_keys_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
label = "GPIO Buttons";
|
||||
|
||||
volume-up-button {
|
||||
label = "Volume Up";
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
debounce-interval = <15>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_id: usb-id {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&usb_id_default>;
|
||||
pinctrl-1 = <&usb_id_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_i2c2 {
|
||||
status = "okay";
|
||||
|
||||
touchscreen: touchscreen@20 {
|
||||
compatible = "syna,rmi4-i2c";
|
||||
reg = <0x20>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vio-supply = <&pm8916_l6>;
|
||||
|
||||
syna,startup-delay-ms = <100>;
|
||||
|
||||
rmi4-f01@1 {
|
||||
reg = <1>;
|
||||
syna,nosleep-mode = <1>; /* Allow sleeping */
|
||||
};
|
||||
|
||||
rmi4-f11@11 {
|
||||
reg = <11>;
|
||||
syna,sensor-type = <1>; /* Touchscreen */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp_uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mpss_mem {
|
||||
reg = <0x0 0x86800000 0x0 0x5500000>;
|
||||
};
|
||||
|
||||
&pm8916_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l16: l16 {
|
||||
regulator-min-microvolt = <3100000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8916_vib {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
extcon = <&usb_id>, <&usb_id>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_hs_phy {
|
||||
extcon = <&usb_id>;
|
||||
};
|
||||
|
||||
&venus {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&venus_mem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcnss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcnss_iris {
|
||||
compatible = "qcom,wcn3620";
|
||||
};
|
||||
|
||||
&wcnss_mem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* CTS/RTX are not used */
|
||||
&blsp_uart1_default {
|
||||
pins = "gpio0", "gpio1";
|
||||
};
|
||||
&blsp_uart1_sleep {
|
||||
pins = "gpio0", "gpio1";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio_keys_default: gpio-keys-default-state {
|
||||
pins = "gpio107";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
usb_id_default: usb-id-default-state {
|
||||
pins = "gpio91";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
usb_id_sleep: usb-id-sleep-state {
|
||||
pins = "gpio91";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
147
arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts
Normal file
147
arch/arm64/boot/dts/qcom/msm8916-motorola-harpia.dts
Normal file
@@ -0,0 +1,147 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8916-motorola-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Motorola Moto G4 Play";
|
||||
compatible = "motorola,harpia", "qcom,msm8916";
|
||||
chassis-type = "handset";
|
||||
};
|
||||
|
||||
&blsp_i2c1 {
|
||||
status = "okay";
|
||||
|
||||
battery@36 {
|
||||
compatible = "maxim,max17050";
|
||||
reg = <0x36>;
|
||||
|
||||
interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-0 = <&battery_alert_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
maxim,rsns-microohm = <10000>;
|
||||
maxim,over-heat-temp = <600>;
|
||||
maxim,cold-temp = <(-200)>;
|
||||
maxim,dead-volt = <3200>;
|
||||
maxim,over-volt = <4500>;
|
||||
};
|
||||
|
||||
/* charger@6b */
|
||||
};
|
||||
|
||||
&blsp_i2c4 {
|
||||
status = "okay";
|
||||
|
||||
accelerometer@19 {
|
||||
compatible = "bosch,bma253";
|
||||
reg = <0x19>;
|
||||
|
||||
interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>,
|
||||
<&tlmm 119 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
|
||||
mount-matrix = "1", "0", "0",
|
||||
"0", "-1", "0",
|
||||
"0", "0", "1";
|
||||
|
||||
pinctrl-0 = <&accel_int_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* proximity@49 */
|
||||
};
|
||||
|
||||
&pm8916_codec {
|
||||
qcom,micbias-lvl = <2800>;
|
||||
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
||||
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
||||
qcom,micbias1-ext-cap;
|
||||
};
|
||||
|
||||
&pm8916_rpm_regulators {
|
||||
pm8916_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
|
||||
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
cd-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&sound {
|
||||
audio-routing =
|
||||
"AMIC1", "MIC BIAS External1",
|
||||
"AMIC2", "MIC BIAS Internal2",
|
||||
"AMIC3", "MIC BIAS External1";
|
||||
|
||||
pinctrl-0 = <&cdc_pdm_default &headset_switch_supply_en
|
||||
&headset_switch_in>;
|
||||
pinctrl-1 = <&cdc_pdm_sleep &headset_switch_supply_en
|
||||
&headset_switch_in>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
};
|
||||
|
||||
&touchscreen {
|
||||
interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
vdd-supply = <&pm8916_l16>;
|
||||
|
||||
pinctrl-0 = <&ts_int_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
accel_int_default: accel-int-default-state {
|
||||
pins = "gpio115", "gpio119";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
battery_alert_default: battery-alert-default-state {
|
||||
pins = "gpio62";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
headset_switch_in: headset-switch-in-state {
|
||||
pins = "gpio112";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-low;
|
||||
};
|
||||
|
||||
headset_switch_supply_en: headset-switch-supply-en-state {
|
||||
pins = "gpio111";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
|
||||
sdc2_cd_default: sdc2-cd-default-state {
|
||||
pins = "gpio118";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
ts_int_default: ts-int-default-state {
|
||||
pins = "gpio13";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user