Merge tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New SoC supported is the rk3588. New boards rk3588-evb1, EmbedFire Lubancat 1+2 (based on different SoCs), a number of Radxa boards (rock-5a and -5b, compute module 3, cm3i e25), OrangePi R1 plus and the Edgeble Neu6 SoM and baseboard. A number of improvements for the Odroid Go (and its clones) including touchscreen and display support, led and audio changes. As well as some improvements for the rk356x, better gpu thermal values for px30 and some minor improvement for rock3a, rock5a, rk3566-demo, roc-rk3399-pc and bi-r2pro. * tag 'v6.3-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits) arm64: dts: rockchip: Correct the model name for Radxa E25 arm64: dts: rockchip: Drop unneeded model for Radxa CM3i arm64: dts: rockchip: Add missing CM3i fallback compatible for Radxa E25 arm64: dts: rockchip: Fix compatible for Radxa CM3 arm64: dts: rockchip: rk3566: Enable WiFi, BT support for Radxa CM3 arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO arm64: dts: rockchip: add display to RG503 arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to rk356x arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SBC boards arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM boards arm64: dts: rockchip: Add Radxa Compute Module 3 IO board arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3 dt-bindings: arm: rockchip: Add Radxa Compute Module 3 arm64: dts: rockchip: Fix RX delay for ethernet phy on rk3588s-rock5a arm64: dts: rockchip: add Hynitron cst340 for Anbernic 353 series arm64: dts: rockchip: Enable wifi module AP6398s for rk3566 box demo arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A IO arm64: dts: rockchip: rk3588: Add Edgeble Neu6 Model A SoM arm64: dts: rockchip: fix hdmi cec on rock-3a arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x ... Link: https://lore.kernel.org/r/6491956.DvuYhMxLoT@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
@@ -95,6 +95,16 @@ properties:
|
||||
- const: elgin,rv1108-r1
|
||||
- const: rockchip,rv1108
|
||||
|
||||
- description: EmbedFire LubanCat 1
|
||||
items:
|
||||
- const: embedfire,lubancat-1
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: EmbedFire LubanCat 2
|
||||
items:
|
||||
- const: embedfire,lubancat-2
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Engicam PX30.Core C.TOUCH 2.0
|
||||
items:
|
||||
- const: engicam,px30-core-ctouch2
|
||||
@@ -599,6 +609,20 @@ properties:
|
||||
- const: pine64,soquartz
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Radxa Compute Module 3(CM3)
|
||||
items:
|
||||
- enum:
|
||||
- radxa,cm3-io
|
||||
- const: radxa,cm3
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Radxa CM3 Industrial
|
||||
items:
|
||||
- enum:
|
||||
- radxa,e25
|
||||
- const: radxa,cm3i
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Radxa Rock
|
||||
items:
|
||||
- const: radxa,rock
|
||||
@@ -652,6 +676,16 @@ properties:
|
||||
- const: radxa,rock3a
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Radxa ROCK 5 Model A
|
||||
items:
|
||||
- const: radxa,rock-5a
|
||||
- const: rockchip,rk3588s
|
||||
|
||||
- description: Radxa ROCK 5 Model B
|
||||
items:
|
||||
- const: radxa,rock-5b
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Rikomagic MK808 v1
|
||||
items:
|
||||
- const: rikomagic,mk808
|
||||
@@ -736,6 +770,11 @@ properties:
|
||||
- const: rockchip,rk3399-sapphire-excavator
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Rockchip RK3588 Evaluation board
|
||||
items:
|
||||
- const: rockchip,rk3588-evb1-v10
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Rockchip RV1108 Evaluation board
|
||||
items:
|
||||
- const: rockchip,rv1108-evb
|
||||
@@ -761,6 +800,11 @@ properties:
|
||||
- const: tronsmart,orion-r68-meta
|
||||
- const: rockchip,rk3368
|
||||
|
||||
- description: Xunlong Orange Pi R1 Plus
|
||||
items:
|
||||
- const: xunlong,orangepi-r1-plus
|
||||
- const: rockchip,rk3328
|
||||
|
||||
- description: Zkmagic A95X Z2
|
||||
items:
|
||||
- const: zkmagic,a95x-z2
|
||||
|
||||
@@ -20,6 +20,11 @@ properties:
|
||||
- rockchip,rk3568-pipe-grf
|
||||
- rockchip,rk3568-pipe-phy-grf
|
||||
- rockchip,rk3568-usb2phy-grf
|
||||
- rockchip,rk3588-bigcore0-grf
|
||||
- rockchip,rk3588-bigcore1-grf
|
||||
- rockchip,rk3588-ioc
|
||||
- rockchip,rk3588-php-grf
|
||||
- rockchip,rk3588-sys-grf
|
||||
- rockchip,rk3588-pcie3-phy-grf
|
||||
- rockchip,rk3588-pcie3-pipe-grf
|
||||
- rockchip,rv1108-usbgrf
|
||||
|
||||
@@ -400,6 +400,8 @@ patternProperties:
|
||||
description: Elimo Engineering Ltd.
|
||||
"^elpida,.*":
|
||||
description: Elpida Memory, Inc.
|
||||
"^embedfire,.*":
|
||||
description: Dongguan EmbedFire Electronic Technology Co., Ltd.
|
||||
"^embest,.*":
|
||||
description: Shenzhen Embest Technology Co., Ltd.
|
||||
"^emlid,.*":
|
||||
|
||||
@@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
|
||||
@@ -73,12 +74,20 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
|
||||
|
||||
@@ -210,12 +210,6 @@
|
||||
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
contribution = <4096>;
|
||||
};
|
||||
|
||||
map1 {
|
||||
trip = <&target>;
|
||||
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
contribution = <4096>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -223,6 +217,33 @@
|
||||
polling-delay-passive = <100>; /* milliseconds */
|
||||
polling-delay = <1000>; /* milliseconds */
|
||||
thermal-sensors = <&tsadc 1>;
|
||||
|
||||
trips {
|
||||
gpu_threshold: gpu-threshold {
|
||||
temperature = <70000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
gpu_target: gpu-target {
|
||||
temperature = <85000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
gpu_crit: gpu-crit {
|
||||
temperature = <115000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&gpu_target>;
|
||||
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -8,6 +8,7 @@
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3326.dtsi"
|
||||
|
||||
@@ -113,21 +114,35 @@
|
||||
};
|
||||
};
|
||||
|
||||
leds: gpio-leds {
|
||||
/* led-1 is wired directly to output of always-on regulator */
|
||||
|
||||
gpio_led: gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&blue_led_pin>;
|
||||
pinctrl-0 = <&red_led_pin>;
|
||||
|
||||
blue_led: led-0 {
|
||||
label = "blue:heartbeat";
|
||||
gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
red_led: led-3 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_CHARGING;
|
||||
};
|
||||
};
|
||||
|
||||
pwm_led: led-controller {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
blue_led: led-2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
linux,default-trigger = "heartbeat";
|
||||
max-brightness = <255>;
|
||||
pwms = <&pwm3 0 25000 0>;
|
||||
};
|
||||
};
|
||||
|
||||
rk817-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "Analog";
|
||||
simple-audio-card,name = "rk817_int";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
@@ -192,14 +207,12 @@
|
||||
assigned-clocks = <&cru PLL_NPLL>,
|
||||
<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
|
||||
<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
|
||||
<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
|
||||
<&cru PLL_CPLL>;
|
||||
<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
|
||||
|
||||
assigned-clock-rates = <1188000000>,
|
||||
<200000000>, <200000000>,
|
||||
<150000000>, <150000000>,
|
||||
<100000000>, <200000000>,
|
||||
<17000000>;
|
||||
<100000000>, <200000000>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
@@ -467,6 +480,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
@@ -571,8 +588,8 @@
|
||||
};
|
||||
|
||||
leds {
|
||||
blue_led_pin: blue-led-pin {
|
||||
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
red_led_pin: red-led-pin {
|
||||
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
373
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
Normal file
373
arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
Normal file
@@ -0,0 +1,373 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Based on rk3328-nanopi-r2s.dts, which is:
|
||||
* Copyright (c) 2020 David Bauer <mail@david-bauer.net>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3328.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xunlong Orange Pi R1 Plus";
|
||||
compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
|
||||
|
||||
aliases {
|
||||
ethernet1 = &rtl8153;
|
||||
mmc0 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gmac_clk: gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_LAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-2 {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: sdmmc-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&sdmmc0m1_pin>;
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vdd_5v_lan: vdd-5v-lan-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&lan_vdd_pin>;
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "vdd_5v_lan";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&gmac2io {
|
||||
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
|
||||
assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
|
||||
clock_in_out = "input";
|
||||
phy-handle = <&rtl8211e>;
|
||||
phy-mode = "rgmii";
|
||||
phy-supply = <&vcc_io>;
|
||||
pinctrl-0 = <&rgmiim1_pins>;
|
||||
pinctrl-names = "default";
|
||||
snps,aal;
|
||||
rx_delay = <0x18>;
|
||||
tx_delay = <0x24>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rtl8211e: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
pinctrl-0 = <ð_phy_reset_pin>;
|
||||
pinctrl-names = "default";
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <50000>;
|
||||
reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
rk805: pmic@18 {
|
||||
compatible = "rockchip,rk805";
|
||||
reg = <0x18>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk805-clkout2";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
pinctrl-names = "default";
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc5-supply = <&vcc_io>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_log: DCDC_REG1 {
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_arm: DCDC_REG2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_io: DCDC_REG4 {
|
||||
regulator-name = "vcc_io";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_18: LDO_REG1 {
|
||||
regulator-name = "vcc_18";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc18_emmc: LDO_REG2 {
|
||||
regulator-name = "vcc18_emmc";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_10: LDO_REG3 {
|
||||
regulator-name = "vdd_10";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
pmuio-supply = <&vcc_io>;
|
||||
vccio1-supply = <&vcc_io>;
|
||||
vccio2-supply = <&vcc18_emmc>;
|
||||
vccio3-supply = <&vcc_io>;
|
||||
vccio4-supply = <&vcc_io>;
|
||||
vccio5-supply = <&vcc_io>;
|
||||
vccio6-supply = <&vcc_io>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
gmac2io {
|
||||
eth_phy_reset_pin: eth-phy-reset-pin {
|
||||
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
lan_led_pin: lan-led-pin {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
sys_led_pin: sys-led-pin {
|
||||
rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wan_led_pin: wan-led-pin {
|
||||
rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
lan {
|
||||
lan_vdd_pin: lan-vdd-pin {
|
||||
rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
|
||||
pinctrl-names = "default";
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <0>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* Second port is for USB 3.0 */
|
||||
rtl8153: device@2 {
|
||||
compatible = "usbbda,8153";
|
||||
reg = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -735,7 +735,7 @@
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
spi-max-frequency = <30000000>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -15,8 +15,8 @@
|
||||
compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdmmc;
|
||||
mmc1 = &sdhci;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
|
||||
@@ -13,8 +13,8 @@
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
mmc0 = &sdmmc;
|
||||
mmc1 = &sdhci;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
|
||||
@@ -13,8 +13,8 @@
|
||||
compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdmmc;
|
||||
mmc1 = &sdhci;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc-pcie-regulator {
|
||||
|
||||
@@ -95,6 +95,18 @@
|
||||
pintctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2m1_xfer>;
|
||||
status = "okay";
|
||||
|
||||
touch@1a {
|
||||
compatible = "hynitron,cst340";
|
||||
reg = <0x1a>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-0 = <&touch_rst>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_LOW>;
|
||||
touchscreen-size-x = <640>;
|
||||
touchscreen-size-y = <480>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
@@ -104,6 +116,13 @@
|
||||
<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
touch {
|
||||
touch_rst: touch-rst {
|
||||
rockchip,pins =
|
||||
<4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rk817 {
|
||||
|
||||
@@ -82,6 +82,18 @@
|
||||
pintctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2m1_xfer>;
|
||||
status = "okay";
|
||||
|
||||
touch@1a {
|
||||
compatible = "hynitron,cst340";
|
||||
reg = <0x1a>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-0 = <&touch_rst>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_LOW>;
|
||||
touchscreen-size-x = <640>;
|
||||
touchscreen-size-y = <480>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
|
||||
@@ -47,6 +47,21 @@
|
||||
mosi-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
cs-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
num-chipselects = <0>;
|
||||
|
||||
panel@0 {
|
||||
compatible = "samsung,ams495qa01";
|
||||
reg = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_reset>;
|
||||
reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
vdd-supply = <&vcc_3v3>;
|
||||
|
||||
port {
|
||||
mipi_in_panel: endpoint {
|
||||
remote-endpoint = <&mipi_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Channels reversed for both headphones and speakers. */
|
||||
@@ -94,6 +109,32 @@
|
||||
assigned-clock-rates = <1200000000>, <200000000>, <500000000>;
|
||||
};
|
||||
|
||||
&dsi_dphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dsi0 {
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
dsi0_in: port@0 {
|
||||
reg = <0>;
|
||||
|
||||
dsi0_in_vp1: endpoint {
|
||||
remote-endpoint = <&vp1_out_dsi0>;
|
||||
};
|
||||
};
|
||||
|
||||
dsi0_out: port@1 {
|
||||
reg = <1>;
|
||||
|
||||
mipi_out_panel: endpoint {
|
||||
remote-endpoint = <&mipi_in_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio_keys_control {
|
||||
button-a {
|
||||
gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
|
||||
@@ -146,6 +187,13 @@
|
||||
};
|
||||
};
|
||||
|
||||
gpio-lcd {
|
||||
lcd_reset: lcd-reset {
|
||||
rockchip,pins =
|
||||
<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-spi {
|
||||
spi_pins: spi-pins {
|
||||
rockchip,pins =
|
||||
@@ -164,3 +212,10 @@
|
||||
rockchip,sleep-filter-current-microamp = <100000>;
|
||||
};
|
||||
};
|
||||
|
||||
&vp1 {
|
||||
vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_MIPI0>;
|
||||
remote-endpoint = <&dsi0_in_vp1>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -324,8 +324,12 @@
|
||||
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_host_wake_h: wifi-host-wake-l {
|
||||
rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_32k: wifi-32k {
|
||||
rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
|
||||
rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -380,9 +384,15 @@
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
/* WiFi & BT combo module AMPAK AP6398S */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus-width = <4>;
|
||||
clock-frequency = <150000000>;
|
||||
cap-sdio-irq;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
@@ -390,6 +400,16 @@
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_h>;
|
||||
};
|
||||
};
|
||||
|
||||
&spdif {
|
||||
|
||||
595
arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
Normal file
595
arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
Normal file
@@ -0,0 +1,595 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "EmbedFire LubanCat 1";
|
||||
compatible = "embedfire,lubancat-1", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gmac1_clkin: external-gmac1-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac1_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sys_led: sys-led {
|
||||
label = "sys_led";
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sys_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
usb_5v: usb-5v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_5v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&usb_5v>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb20_host_en>;
|
||||
regulator-name = "vcc5v0_usb20_host";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb30_host_en>;
|
||||
regulator-name = "vcc5v0_usb30_host";
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
snps,reset-gpio = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 75ms, 100ms */
|
||||
snps,reset-delays-us = <0 75000 100000>;
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2_level3
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk_level2
|
||||
&gmac1m1_rgmii_bus_level3>;
|
||||
tx_delay = <0x1a>;
|
||||
rx_delay = <0x0c>;
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
disable-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
sys_led_pin: sys-status-led-pin {
|
||||
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
|
||||
rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
|
||||
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins =
|
||||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_3v3>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>;
|
||||
assigned-clock-rates = <200000000>, <24000000>, <200000000>;
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
|
||||
supports-emmc;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
max-frequency = <150000000>;
|
||||
supports-sd;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB OTG/USB Host_1 USB 2.0 Comb */
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB Host_2/USB Host_3 USB 2.0 Comb */
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB3.0 Host */
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
272
arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
Normal file
272
arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
Normal file
@@ -0,0 +1,272 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Radxa Limited
|
||||
* Copyright (c) 2022 Amarula Solutions(India)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3566.dtsi"
|
||||
#include "rk3566-radxa-cm3.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa Compute Module 3(CM3) IO Board";
|
||||
compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
mmc1 = &sdmmc0;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gmac1_clkin: external-gmac1-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac1_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-1 {
|
||||
gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_ACTIVITY;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pi_nled_activity>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc5v0_usb30: vcc5v0-usb30-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb30";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb30_en_h>;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcca1v8_image: vcca1v8-image-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8_p>;
|
||||
};
|
||||
|
||||
vdda0v9_image: vdda0v9-image-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcca0v9_image";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vdda_0v9>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
clock_in_out = "input";
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m0_miim
|
||||
&gmac1m0_tx_bus2
|
||||
&gmac1m0_rx_bus2
|
||||
&gmac1m0_rgmii_clk
|
||||
&gmac1m0_rgmii_bus
|
||||
&gmac1m0_clkinout>;
|
||||
snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
tx_delay = <0x46>;
|
||||
rx_delay = <0x2e>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@0 {
|
||||
compatible="ethernet-phy-ieee802.3-c22";
|
||||
reg= <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
gmac1 {
|
||||
gmac1m0_miim: gmac1m0-miim {
|
||||
rockchip,pins =
|
||||
/* gmac1_mdcm0 */
|
||||
<3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
|
||||
/* gmac1_mdiom0 */
|
||||
<3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
|
||||
};
|
||||
|
||||
gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
|
||||
rockchip,pins =
|
||||
/* gmac1_rxd0m0 */
|
||||
<3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
|
||||
/* gmac1_rxd1m0 */
|
||||
<3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
|
||||
/* gmac1_rxdvcrsm0 */
|
||||
<3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
|
||||
};
|
||||
|
||||
gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
|
||||
rockchip,pins =
|
||||
/* gmac1_txd0m0 */
|
||||
<3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
|
||||
/* gmac1_txd1m0 */
|
||||
<3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
|
||||
/* gmac1_txenm0 */
|
||||
<3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
|
||||
};
|
||||
|
||||
gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
|
||||
rockchip,pins =
|
||||
/* gmac1_rxclkm0 */
|
||||
<3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
|
||||
/* gmac1_txclkm0 */
|
||||
<3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
|
||||
};
|
||||
|
||||
gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
|
||||
rockchip,pins =
|
||||
/* gmac1_rxd2m0 */
|
||||
<3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
|
||||
/* gmac1_rxd3m0 */
|
||||
<3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
|
||||
/* gmac1_txd2m0 */
|
||||
<3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
|
||||
/* gmac1_txd3m0 */
|
||||
<3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
|
||||
};
|
||||
|
||||
gmac1m0_clkinout: gmac1m0-clkinout {
|
||||
rockchip,pins =
|
||||
/* gmac1_mclkinoutm0 */
|
||||
<3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
pi_nled_activity: pi-nled-activity {
|
||||
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdcard {
|
||||
sdmmc_pwren: sdmmc-pwren {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb30_en_h: vcc5v0-host-en-h {
|
||||
rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
425
arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
Normal file
425
arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
Normal file
@@ -0,0 +1,425 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Radxa Limited
|
||||
* Copyright (c) 2022 Amarula Solutions(India)
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "radxa,cm3", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
linux,default-trigger = "timer";
|
||||
default-state = "on";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_led2>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_1v8: vcc-1v8-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8_p>;
|
||||
};
|
||||
|
||||
vcc_3v3: vcc-3v3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcca_1v8: vcca-1v8-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8_p>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: pwrseq-sdio {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk817 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_reg_on_h>;
|
||||
reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_npu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk817: pmic@20 {
|
||||
compatible = "rockchip,rk817";
|
||||
reg = <0x20>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk817-clkout1", "rk817-clkout2";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc5-supply = <&vcc_sys>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
vcc7-supply = <&vcc_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu_npu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu_npu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sys: DCDC_REG4 {
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG1 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_p: LDO_REG7 {
|
||||
regulator-name = "vcc_1v8_p";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG8 {
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc2v8_dvp: LDO_REG9 {
|
||||
regulator-name = "vcc2v8_dvp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bluetooth {
|
||||
bt_host_wake_h: bt-host-wake-h {
|
||||
rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_reg_on_h: bt-reg-on-h {
|
||||
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_host_h: bt-wake-host-h {
|
||||
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
user_led2: user-led2 {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_reg_on_h: wifi-reg-on-h {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_host_wake_h: wifi-host-wake-h {
|
||||
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc_3v3>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_3v3>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
|
||||
wifi@1 {
|
||||
compatible = "brcm,bcm43455-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_h>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm4345c5";
|
||||
clocks = <&rk817 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
|
||||
vbat-supply = <&vcc_3v3>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
@@ -53,6 +53,22 @@
|
||||
};
|
||||
};
|
||||
|
||||
rk809-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,name = "STATION-M2-FRONT";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
status = "okay";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk809>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
status = "okay";
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
@@ -200,6 +216,10 @@
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
@@ -226,12 +246,16 @@
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||||
clock-names = "mclk";
|
||||
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
@@ -243,6 +267,10 @@
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
codec {
|
||||
mic-in-differential;
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_log: DCDC_REG1 {
|
||||
regulator-name = "vdd_log";
|
||||
@@ -452,6 +480,18 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx
|
||||
&i2s1m0_lrcktx &i2s1m0_lrckrx
|
||||
&i2s1m0_sdi0 &i2s1m0_sdo0>;
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
|
||||
@@ -66,6 +66,13 @@
|
||||
};
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_receiver_pin>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
@@ -614,6 +621,12 @@
|
||||
};
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
ir_receiver_pin: ir-receiver-pin {
|
||||
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
minipcie_enable_h: minipcie-enable-h {
|
||||
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
|
||||
|
||||
733
arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
Normal file
733
arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
Normal file
@@ -0,0 +1,733 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/*
|
||||
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2022 EmbedFire <embedfire@embedfire.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
model = "EmbedFire LubanCat 2";
|
||||
compatible = "embedfire,lubancat-2", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
user_led: user-led {
|
||||
label = "user_led";
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dc_5v: dc-5v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_5v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_5v>;
|
||||
};
|
||||
|
||||
vcc3v3_m2_pcie: vcc3v3-m2-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "m2_pcie_3v3";
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&vcc3v3_m2_pcie_en>;
|
||||
pinctrl-names = "default";
|
||||
startup-delay-us = <200000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_mini_pcie: vcc3v3-mini-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "minipcie_3v3";
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&vcc3v3_mini_pcie_en>;
|
||||
pinctrl-names = "default";
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb20_host";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&vcc5v0_usb20_host_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb30_host";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&vcc5v0_usb30_host_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
vcc5v0_otg_vbus: vcc5v0-otg-vbus-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_otg_vbus";
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&vcc5v0_otg_vbus_en>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||||
#clock-cells = <1>;
|
||||
clock-names = "mclk";
|
||||
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
#sound-dai-cells = <0>;
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
wakeup-source;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
|
||||
snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
|
||||
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus>;
|
||||
|
||||
tx_delay = <0x22>;
|
||||
rx_delay = <0x0e>;
|
||||
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "output";
|
||||
|
||||
snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_rgmii_bus>;
|
||||
|
||||
tx_delay = <0x21>;
|
||||
rx_delay = <0x0e>;
|
||||
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&gic {
|
||||
mbi-ranges = <94 31>, <229 31>, <289 31>;
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x2 {
|
||||
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_m2_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_mini_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm9 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pwm10 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pwm14 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&spi3 {
|
||||
pinctrl-0 = <&spi3m1_pins>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3m1_xfer>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>;
|
||||
assigned-clock-rates = <200000000>, <24000000>, <200000000>;
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
|
||||
supports-emmc;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
max-frequency = <150000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB OTG/USB Host_1 USB 2.0 Comb */
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb30_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_otg_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB Host_2/USB Host_3 USB 2.0 Comb */
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb20_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */
|
||||
&usb_host0_xhci {
|
||||
phys = <&usb2phy0_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
extcon = <&usb2phy0>;
|
||||
maximum-speed = "high-speed";
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* USB3.0 Host */
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
user_led_pin: user-status-led-pin {
|
||||
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
|
||||
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
|
||||
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en {
|
||||
rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -3117,4 +3117,98 @@
|
||||
<0 RK_PA1 0 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
lcdc {
|
||||
/omit-if-no-ref/
|
||||
lcdc_clock: lcdc-clock {
|
||||
rockchip,pins =
|
||||
/* lcdc_clk */
|
||||
<3 RK_PA0 1 &pcfg_pull_none>,
|
||||
/* lcdc_den */
|
||||
<3 RK_PC3 1 &pcfg_pull_none>,
|
||||
/* lcdc_hsync */
|
||||
<3 RK_PC1 1 &pcfg_pull_none>,
|
||||
/* lcdc_vsync */
|
||||
<3 RK_PC2 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
lcdc_data16: lcdc-data16 {
|
||||
rockchip,pins =
|
||||
/* lcdc_d3 */
|
||||
<2 RK_PD3 1 &pcfg_pull_none>,
|
||||
/* lcdc_d4 */
|
||||
<2 RK_PD4 1 &pcfg_pull_none>,
|
||||
/* lcdc_d5 */
|
||||
<2 RK_PD5 1 &pcfg_pull_none>,
|
||||
/* lcdc_d6 */
|
||||
<2 RK_PD6 1 &pcfg_pull_none>,
|
||||
/* lcdc_d7 */
|
||||
<2 RK_PD7 1 &pcfg_pull_none>,
|
||||
/* lcdc_d10 */
|
||||
<3 RK_PA3 1 &pcfg_pull_none>,
|
||||
/* lcdc_d11 */
|
||||
<3 RK_PA4 1 &pcfg_pull_none>,
|
||||
/* lcdc_d12 */
|
||||
<3 RK_PA5 1 &pcfg_pull_none>,
|
||||
/* lcdc_d13 */
|
||||
<3 RK_PA6 1 &pcfg_pull_none>,
|
||||
/* lcdc_d14 */
|
||||
<3 RK_PA7 1 &pcfg_pull_none>,
|
||||
/* lcdc_d15 */
|
||||
<3 RK_PB0 1 &pcfg_pull_none>,
|
||||
/* lcdc_d19 */
|
||||
<3 RK_PB4 1 &pcfg_pull_none>,
|
||||
/* lcdc_d20 */
|
||||
<3 RK_PB5 1 &pcfg_pull_none>,
|
||||
/* lcdc_d21 */
|
||||
<3 RK_PB6 1 &pcfg_pull_none>,
|
||||
/* lcdc_d22 */
|
||||
<3 RK_PB7 1 &pcfg_pull_none>,
|
||||
/* lcdc_d23 */
|
||||
<3 RK_PC0 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
lcdc_data18: lcdc-data18 {
|
||||
rockchip,pins =
|
||||
/* lcdc_d2 */
|
||||
<2 RK_PD2 1 &pcfg_pull_none>,
|
||||
/* lcdc_d3 */
|
||||
<2 RK_PD3 1 &pcfg_pull_none>,
|
||||
/* lcdc_d4 */
|
||||
<2 RK_PD4 1 &pcfg_pull_none>,
|
||||
/* lcdc_d5 */
|
||||
<2 RK_PD5 1 &pcfg_pull_none>,
|
||||
/* lcdc_d6 */
|
||||
<2 RK_PD6 1 &pcfg_pull_none>,
|
||||
/* lcdc_d7 */
|
||||
<2 RK_PD7 1 &pcfg_pull_none>,
|
||||
/* lcdc_d10 */
|
||||
<3 RK_PA3 1 &pcfg_pull_none>,
|
||||
/* lcdc_d11 */
|
||||
<3 RK_PA4 1 &pcfg_pull_none>,
|
||||
/* lcdc_d12 */
|
||||
<3 RK_PA5 1 &pcfg_pull_none>,
|
||||
/* lcdc_d13 */
|
||||
<3 RK_PA6 1 &pcfg_pull_none>,
|
||||
/* lcdc_d14 */
|
||||
<3 RK_PA7 1 &pcfg_pull_none>,
|
||||
/* lcdc_d15 */
|
||||
<3 RK_PB0 1 &pcfg_pull_none>,
|
||||
/* lcdc_d18 */
|
||||
<3 RK_PB3 1 &pcfg_pull_none>,
|
||||
/* lcdc_d19 */
|
||||
<3 RK_PB4 1 &pcfg_pull_none>,
|
||||
/* lcdc_d20 */
|
||||
<3 RK_PB5 1 &pcfg_pull_none>,
|
||||
/* lcdc_d21 */
|
||||
<3 RK_PB6 1 &pcfg_pull_none>,
|
||||
/* lcdc_d22 */
|
||||
<3 RK_PB7 1 &pcfg_pull_none>,
|
||||
/* lcdc_d23 */
|
||||
<3 RK_PC0 1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
415
arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
Normal file
415
arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
Normal file
@@ -0,0 +1,415 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "radxa,cm3i", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_user: led-0 {
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_user_en>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie30_avdd0v9: pcie30-avdd0v9-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
pcie30_avdd1v8: pcie30-avdd1v8-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v_input>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v_input>;
|
||||
};
|
||||
|
||||
/* labeled +5v_input in schematic */
|
||||
vcc5v_input: vcc5v-input-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v_input";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v_input>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
leds {
|
||||
led_user_en: led_user_en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic_int {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio2-supply = <&vcc_1v8>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
extcon = <&usb2phy0>;
|
||||
};
|
||||
228
arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
Normal file
228
arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
Normal file
@@ -0,0 +1,228 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3568-radxa-cm3i.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa E25 Carrier Board";
|
||||
compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
mmc1 = &sdmmc0;
|
||||
};
|
||||
|
||||
pwm-leds {
|
||||
compatible = "pwm-leds-multicolor";
|
||||
|
||||
multi-led {
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
max-brightness = <255>;
|
||||
|
||||
led-red {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
pwms = <&pwm1 0 1000000 0>;
|
||||
};
|
||||
|
||||
led-green {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
pwms = <&pwm2 0 1000000 0>;
|
||||
};
|
||||
|
||||
led-blue {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
pwms = <&pwm12 0 1000000 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vbus_typec: vbus-typec-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vbus_typec_en>;
|
||||
regulator-name = "vbus_typec";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_minipcie: vcc3v3-minipcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&minipcie_enable_h>;
|
||||
regulator-name = "vcc3v3_minipcie";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_ngff: vcc3v3-ngff-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ngffpcie_enable_h>;
|
||||
regulator-name = "vcc3v3_ngff";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
/* actually fed by vcc5v0_sys, dependent
|
||||
* on pi6c clock generator
|
||||
*/
|
||||
vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie30x1_enable_h>;
|
||||
regulator-name = "vcc3v3_pcie30x1";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc3v3_pi6c_05>;
|
||||
};
|
||||
|
||||
vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_enable_h>;
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie20_reset_h>;
|
||||
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pi6c_05>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
data-lanes = <1 2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x1 {
|
||||
num-lanes = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie30x1m0_pins>;
|
||||
reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30x1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x2 {
|
||||
num-lanes = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie30x2_reset_h>;
|
||||
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pi6c_05>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pcie {
|
||||
pcie20_reset_h: pcie20-reset-h {
|
||||
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie30x1_enable_h: pcie30x1-enable-h {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie30x2_reset_h: pcie30x2-reset-h {
|
||||
rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie_enable_h: pcie-enable-h {
|
||||
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
minipcie_enable_h: minipcie-enable-h {
|
||||
rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
ngffpcie_enable_h: ngffpcie-enable-h {
|
||||
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vbus_typec_en: vbus_typec_en {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm12 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm12m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
/* Also used in pcie30x1_clkreqnm0 */
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vbus_typec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc3v3_minipcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc3v3_ngff>;
|
||||
status = "okay";
|
||||
};
|
||||
@@ -13,8 +13,8 @@
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdhci;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc0;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
@@ -279,6 +279,8 @@
|
||||
&hdmi {
|
||||
avdd-0v9-supply = <&vdda0v9_image>;
|
||||
avdd-1v8-supply = <&vcca1v8_image>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm1_cec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
@@ -422,8 +422,9 @@
|
||||
clock-names = "xin24m";
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>;
|
||||
assigned-clock-rates = <1200000000>, <200000000>;
|
||||
assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, <&pmucru PLL_PPLL>;
|
||||
assigned-clock-rates = <32768>, <1200000000>, <200000000>;
|
||||
assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>;
|
||||
rockchip,grf = <&grf>;
|
||||
};
|
||||
|
||||
|
||||
27
arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
Normal file
27
arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
Normal file
@@ -0,0 +1,27 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3588.dtsi"
|
||||
#include "rk3588-edgeble-neu6a.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Edgeble Neu6A IO Board";
|
||||
compatible = "edgeble,neural-compute-module-6a-io",
|
||||
"edgeble,neural-compute-module-6a", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
32
arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi
Normal file
32
arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi
Normal file
@@ -0,0 +1,32 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
|
||||
*/
|
||||
|
||||
/ {
|
||||
compatible = "edgeble,neural-compute-module-6a", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
129
arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
Normal file
129
arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
Normal file
@@ -0,0 +1,129 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3588 EVB1 V10 Board";
|
||||
compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
power-supply = <&vcc12v_dcin>;
|
||||
pwms = <&pwm2 0 25000 0>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy>;
|
||||
phy-mode = "rgmii-rxid";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus>;
|
||||
pinctrl-names = "default";
|
||||
rx_delay = <0x00>;
|
||||
tx_delay = <0x43>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy: ethernet-phy@1 {
|
||||
/* RTL8211F */
|
||||
compatible = "ethernet-phy-id001c.c916";
|
||||
reg = <0x1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtl8211f_rst>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
rtl8211f {
|
||||
rtl8211f_rst: rtl8211f-rst {
|
||||
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
516
arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi
Normal file
516
arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi
Normal file
@@ -0,0 +1,516 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rockchip-pinconf.dtsi"
|
||||
|
||||
/*
|
||||
* This file is auto generated by pin2dts tool, please keep these code
|
||||
* by adding changes at end of this file.
|
||||
*/
|
||||
&pinctrl {
|
||||
clk32k {
|
||||
/omit-if-no-ref/
|
||||
clk32k_out1: clk32k-out1 {
|
||||
rockchip,pins =
|
||||
/* clk32k_out1 */
|
||||
<2 RK_PC5 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
eth0 {
|
||||
/omit-if-no-ref/
|
||||
eth0_pins: eth0-pins {
|
||||
rockchip,pins =
|
||||
/* eth0_refclko_25m */
|
||||
<2 RK_PC3 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
fspi {
|
||||
/omit-if-no-ref/
|
||||
fspim1_pins: fspim1-pins {
|
||||
rockchip,pins =
|
||||
/* fspi_clk_m1 */
|
||||
<2 RK_PB3 3 &pcfg_pull_up_drv_level_2>,
|
||||
/* fspi_cs0n_m1 */
|
||||
<2 RK_PB4 3 &pcfg_pull_up_drv_level_2>,
|
||||
/* fspi_d0_m1 */
|
||||
<2 RK_PA6 3 &pcfg_pull_up_drv_level_2>,
|
||||
/* fspi_d1_m1 */
|
||||
<2 RK_PA7 3 &pcfg_pull_up_drv_level_2>,
|
||||
/* fspi_d2_m1 */
|
||||
<2 RK_PB0 3 &pcfg_pull_up_drv_level_2>,
|
||||
/* fspi_d3_m1 */
|
||||
<2 RK_PB1 3 &pcfg_pull_up_drv_level_2>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
fspim1_cs1: fspim1-cs1 {
|
||||
rockchip,pins =
|
||||
/* fspi_cs1n_m1 */
|
||||
<2 RK_PB5 3 &pcfg_pull_up_drv_level_2>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac0 {
|
||||
/omit-if-no-ref/
|
||||
gmac0_miim: gmac0-miim {
|
||||
rockchip,pins =
|
||||
/* gmac0_mdc */
|
||||
<4 RK_PC4 1 &pcfg_pull_none>,
|
||||
/* gmac0_mdio */
|
||||
<4 RK_PC5 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
gmac0_clkinout: gmac0-clkinout {
|
||||
rockchip,pins =
|
||||
/* gmac0_mclkinout */
|
||||
<4 RK_PC3 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
gmac0_rx_bus2: gmac0-rx-bus2 {
|
||||
rockchip,pins =
|
||||
/* gmac0_rxd0 */
|
||||
<2 RK_PC1 1 &pcfg_pull_none>,
|
||||
/* gmac0_rxd1 */
|
||||
<2 RK_PC2 1 &pcfg_pull_none>,
|
||||
/* gmac0_rxdv_crs */
|
||||
<4 RK_PC2 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
gmac0_tx_bus2: gmac0-tx-bus2 {
|
||||
rockchip,pins =
|
||||
/* gmac0_txd0 */
|
||||
<2 RK_PB6 1 &pcfg_pull_none>,
|
||||
/* gmac0_txd1 */
|
||||
<2 RK_PB7 1 &pcfg_pull_none>,
|
||||
/* gmac0_txen */
|
||||
<2 RK_PC0 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
gmac0_rgmii_clk: gmac0-rgmii-clk {
|
||||
rockchip,pins =
|
||||
/* gmac0_rxclk */
|
||||
<2 RK_PB0 1 &pcfg_pull_none>,
|
||||
/* gmac0_txclk */
|
||||
<2 RK_PB3 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
gmac0_rgmii_bus: gmac0-rgmii-bus {
|
||||
rockchip,pins =
|
||||
/* gmac0_rxd2 */
|
||||
<2 RK_PA6 1 &pcfg_pull_none>,
|
||||
/* gmac0_rxd3 */
|
||||
<2 RK_PA7 1 &pcfg_pull_none>,
|
||||
/* gmac0_txd2 */
|
||||
<2 RK_PB1 1 &pcfg_pull_none>,
|
||||
/* gmac0_txd3 */
|
||||
<2 RK_PB2 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
gmac0_ppsclk: gmac0-ppsclk {
|
||||
rockchip,pins =
|
||||
/* gmac0_ppsclk */
|
||||
<2 RK_PC4 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
gmac0_ppstring: gmac0-ppstring {
|
||||
rockchip,pins =
|
||||
/* gmac0_ppstring */
|
||||
<2 RK_PB5 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
gmac0_ptp_refclk: gmac0-ptp-refclk {
|
||||
rockchip,pins =
|
||||
/* gmac0_ptp_refclk */
|
||||
<2 RK_PB4 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
gmac0_txer: gmac0-txer {
|
||||
rockchip,pins =
|
||||
/* gmac0_txer */
|
||||
<4 RK_PC6 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
hdmi {
|
||||
/omit-if-no-ref/
|
||||
hdmim0_tx1_cec: hdmim0-tx1-cec {
|
||||
rockchip,pins =
|
||||
/* hdmim0_tx1_cec */
|
||||
<2 RK_PC4 4 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
hdmim0_tx1_scl: hdmim0-tx1-scl {
|
||||
rockchip,pins =
|
||||
/* hdmim0_tx1_scl */
|
||||
<2 RK_PB5 4 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
hdmim0_tx1_sda: hdmim0-tx1-sda {
|
||||
rockchip,pins =
|
||||
/* hdmim0_tx1_sda */
|
||||
<2 RK_PB4 4 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c0 {
|
||||
/omit-if-no-ref/
|
||||
i2c0m1_xfer: i2c0m1-xfer {
|
||||
rockchip,pins =
|
||||
/* i2c0_scl_m1 */
|
||||
<4 RK_PC5 9 &pcfg_pull_none_smt>,
|
||||
/* i2c0_sda_m1 */
|
||||
<4 RK_PC6 9 &pcfg_pull_none_smt>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2 {
|
||||
/omit-if-no-ref/
|
||||
i2c2m1_xfer: i2c2m1-xfer {
|
||||
rockchip,pins =
|
||||
/* i2c2_scl_m1 */
|
||||
<2 RK_PC1 9 &pcfg_pull_none_smt>,
|
||||
/* i2c2_sda_m1 */
|
||||
<2 RK_PC0 9 &pcfg_pull_none_smt>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c3 {
|
||||
/omit-if-no-ref/
|
||||
i2c3m3_xfer: i2c3m3-xfer {
|
||||
rockchip,pins =
|
||||
/* i2c3_scl_m3 */
|
||||
<2 RK_PB2 9 &pcfg_pull_none_smt>,
|
||||
/* i2c3_sda_m3 */
|
||||
<2 RK_PB3 9 &pcfg_pull_none_smt>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4 {
|
||||
/omit-if-no-ref/
|
||||
i2c4m1_xfer: i2c4m1-xfer {
|
||||
rockchip,pins =
|
||||
/* i2c4_scl_m1 */
|
||||
<2 RK_PB5 9 &pcfg_pull_none_smt>,
|
||||
/* i2c4_sda_m1 */
|
||||
<2 RK_PB4 9 &pcfg_pull_none_smt>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c5 {
|
||||
/omit-if-no-ref/
|
||||
i2c5m4_xfer: i2c5m4-xfer {
|
||||
rockchip,pins =
|
||||
/* i2c5_scl_m4 */
|
||||
<2 RK_PB6 9 &pcfg_pull_none_smt>,
|
||||
/* i2c5_sda_m4 */
|
||||
<2 RK_PB7 9 &pcfg_pull_none_smt>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c6 {
|
||||
/omit-if-no-ref/
|
||||
i2c6m2_xfer: i2c6m2-xfer {
|
||||
rockchip,pins =
|
||||
/* i2c6_scl_m2 */
|
||||
<2 RK_PC3 9 &pcfg_pull_none_smt>,
|
||||
/* i2c6_sda_m2 */
|
||||
<2 RK_PC2 9 &pcfg_pull_none_smt>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c7 {
|
||||
/omit-if-no-ref/
|
||||
i2c7m1_xfer: i2c7m1-xfer {
|
||||
rockchip,pins =
|
||||
/* i2c7_scl_m1 */
|
||||
<4 RK_PC3 9 &pcfg_pull_none_smt>,
|
||||
/* i2c7_sda_m1 */
|
||||
<4 RK_PC4 9 &pcfg_pull_none_smt>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c8 {
|
||||
/omit-if-no-ref/
|
||||
i2c8m1_xfer: i2c8m1-xfer {
|
||||
rockchip,pins =
|
||||
/* i2c8_scl_m1 */
|
||||
<2 RK_PB0 9 &pcfg_pull_none_smt>,
|
||||
/* i2c8_sda_m1 */
|
||||
<2 RK_PB1 9 &pcfg_pull_none_smt>;
|
||||
};
|
||||
};
|
||||
|
||||
i2s2 {
|
||||
/omit-if-no-ref/
|
||||
i2s2m0_lrck: i2s2m0-lrck {
|
||||
rockchip,pins =
|
||||
/* i2s2m0_lrck */
|
||||
<2 RK_PC0 2 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
i2s2m0_mclk: i2s2m0-mclk {
|
||||
rockchip,pins =
|
||||
/* i2s2m0_mclk */
|
||||
<2 RK_PB6 2 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
i2s2m0_sclk: i2s2m0-sclk {
|
||||
rockchip,pins =
|
||||
/* i2s2m0_sclk */
|
||||
<2 RK_PB7 2 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
i2s2m0_sdi: i2s2m0-sdi {
|
||||
rockchip,pins =
|
||||
/* i2s2m0_sdi */
|
||||
<2 RK_PC3 2 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
i2s2m0_sdo: i2s2m0-sdo {
|
||||
rockchip,pins =
|
||||
/* i2s2m0_sdo */
|
||||
<4 RK_PC3 2 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm2 {
|
||||
/omit-if-no-ref/
|
||||
pwm2m2_pins: pwm2m2-pins {
|
||||
rockchip,pins =
|
||||
/* pwm2_m2 */
|
||||
<4 RK_PC2 11 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm4 {
|
||||
/omit-if-no-ref/
|
||||
pwm4m1_pins: pwm4m1-pins {
|
||||
rockchip,pins =
|
||||
/* pwm4_m1 */
|
||||
<4 RK_PC3 11 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm5 {
|
||||
/omit-if-no-ref/
|
||||
pwm5m2_pins: pwm5m2-pins {
|
||||
rockchip,pins =
|
||||
/* pwm5_m2 */
|
||||
<4 RK_PC4 11 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm6 {
|
||||
/omit-if-no-ref/
|
||||
pwm6m2_pins: pwm6m2-pins {
|
||||
rockchip,pins =
|
||||
/* pwm6_m2 */
|
||||
<4 RK_PC5 11 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pwm7 {
|
||||
/omit-if-no-ref/
|
||||
pwm7m3_pins: pwm7m3-pins {
|
||||
rockchip,pins =
|
||||
/* pwm7_ir_m3 */
|
||||
<4 RK_PC6 11 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio {
|
||||
/omit-if-no-ref/
|
||||
sdiom0_pins: sdiom0-pins {
|
||||
rockchip,pins =
|
||||
/* sdio_clk_m0 */
|
||||
<2 RK_PB3 2 &pcfg_pull_none>,
|
||||
/* sdio_cmd_m0 */
|
||||
<2 RK_PB2 2 &pcfg_pull_none>,
|
||||
/* sdio_d0_m0 */
|
||||
<2 RK_PA6 2 &pcfg_pull_none>,
|
||||
/* sdio_d1_m0 */
|
||||
<2 RK_PA7 2 &pcfg_pull_none>,
|
||||
/* sdio_d2_m0 */
|
||||
<2 RK_PB0 2 &pcfg_pull_none>,
|
||||
/* sdio_d3_m0 */
|
||||
<2 RK_PB1 2 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
spi1 {
|
||||
/omit-if-no-ref/
|
||||
spi1m0_pins: spi1m0-pins {
|
||||
rockchip,pins =
|
||||
/* spi1_clk_m0 */
|
||||
<2 RK_PC0 8 &pcfg_pull_up_drv_level_1>,
|
||||
/* spi1_miso_m0 */
|
||||
<2 RK_PC1 8 &pcfg_pull_up_drv_level_1>,
|
||||
/* spi1_mosi_m0 */
|
||||
<2 RK_PC2 8 &pcfg_pull_up_drv_level_1>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
spi1m0_cs0: spi1m0-cs0 {
|
||||
rockchip,pins =
|
||||
/* spi1_cs0_m0 */
|
||||
<2 RK_PC3 8 &pcfg_pull_up_drv_level_1>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
spi1m0_cs1: spi1m0-cs1 {
|
||||
rockchip,pins =
|
||||
/* spi1_cs1_m0 */
|
||||
<2 RK_PC4 8 &pcfg_pull_up_drv_level_1>;
|
||||
};
|
||||
};
|
||||
|
||||
spi3 {
|
||||
/omit-if-no-ref/
|
||||
spi3m0_pins: spi3m0-pins {
|
||||
rockchip,pins =
|
||||
/* spi3_clk_m0 */
|
||||
<4 RK_PC6 8 &pcfg_pull_up_drv_level_1>,
|
||||
/* spi3_miso_m0 */
|
||||
<4 RK_PC4 8 &pcfg_pull_up_drv_level_1>,
|
||||
/* spi3_mosi_m0 */
|
||||
<4 RK_PC5 8 &pcfg_pull_up_drv_level_1>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
spi3m0_cs0: spi3m0-cs0 {
|
||||
rockchip,pins =
|
||||
/* spi3_cs0_m0 */
|
||||
<4 RK_PC2 8 &pcfg_pull_up_drv_level_1>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
spi3m0_cs1: spi3m0-cs1 {
|
||||
rockchip,pins =
|
||||
/* spi3_cs1_m0 */
|
||||
<4 RK_PC3 8 &pcfg_pull_up_drv_level_1>;
|
||||
};
|
||||
};
|
||||
|
||||
uart1 {
|
||||
/omit-if-no-ref/
|
||||
uart1m0_xfer: uart1m0-xfer {
|
||||
rockchip,pins =
|
||||
/* uart1_rx_m0 */
|
||||
<2 RK_PB6 10 &pcfg_pull_up>,
|
||||
/* uart1_tx_m0 */
|
||||
<2 RK_PB7 10 &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
uart1m0_ctsn: uart1m0-ctsn {
|
||||
rockchip,pins =
|
||||
/* uart1m0_ctsn */
|
||||
<2 RK_PC1 10 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
uart1m0_rtsn: uart1m0-rtsn {
|
||||
rockchip,pins =
|
||||
/* uart1m0_rtsn */
|
||||
<2 RK_PC0 10 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
uart6 {
|
||||
/omit-if-no-ref/
|
||||
uart6m0_xfer: uart6m0-xfer {
|
||||
rockchip,pins =
|
||||
/* uart6_rx_m0 */
|
||||
<2 RK_PA6 10 &pcfg_pull_up>,
|
||||
/* uart6_tx_m0 */
|
||||
<2 RK_PA7 10 &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
uart6m0_ctsn: uart6m0-ctsn {
|
||||
rockchip,pins =
|
||||
/* uart6m0_ctsn */
|
||||
<2 RK_PB1 10 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
uart6m0_rtsn: uart6m0-rtsn {
|
||||
rockchip,pins =
|
||||
/* uart6m0_rtsn */
|
||||
<2 RK_PB0 10 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
uart7 {
|
||||
/omit-if-no-ref/
|
||||
uart7m0_xfer: uart7m0-xfer {
|
||||
rockchip,pins =
|
||||
/* uart7_rx_m0 */
|
||||
<2 RK_PB4 10 &pcfg_pull_up>,
|
||||
/* uart7_tx_m0 */
|
||||
<2 RK_PB5 10 &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
uart7m0_ctsn: uart7m0-ctsn {
|
||||
rockchip,pins =
|
||||
/* uart7m0_ctsn */
|
||||
<4 RK_PC6 10 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
uart7m0_rtsn: uart7m0-rtsn {
|
||||
rockchip,pins =
|
||||
/* uart7m0_rtsn */
|
||||
<4 RK_PC2 10 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
uart9 {
|
||||
/omit-if-no-ref/
|
||||
uart9m0_xfer: uart9m0-xfer {
|
||||
rockchip,pins =
|
||||
/* uart9_rx_m0 */
|
||||
<2 RK_PC4 10 &pcfg_pull_up>,
|
||||
/* uart9_tx_m0 */
|
||||
<2 RK_PC2 10 &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
uart9m0_ctsn: uart9m0-ctsn {
|
||||
rockchip,pins =
|
||||
/* uart9m0_ctsn */
|
||||
<4 RK_PC5 10 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/omit-if-no-ref/
|
||||
uart9m0_rtsn: uart9m0-rtsn {
|
||||
rockchip,pins =
|
||||
/* uart9m0_rtsn */
|
||||
<4 RK_PC4 10 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
44
arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
Normal file
44
arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
Normal file
@@ -0,0 +1,44 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK 5 Model B";
|
||||
compatible = "radxa,rock-5b", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
58
arch/arm64/boot/dts/rockchip/rk3588.dtsi
Normal file
58
arch/arm64/boot/dts/rockchip/rk3588.dtsi
Normal file
@@ -0,0 +1,58 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
#include "rk3588s.dtsi"
|
||||
#include "rk3588-pinctrl.dtsi"
|
||||
|
||||
/ {
|
||||
gmac0: ethernet@fe1b0000 {
|
||||
compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
|
||||
reg = <0x0 0xfe1b0000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>,
|
||||
<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
interrupt-names = "macirq", "eth_wake_irq";
|
||||
clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
|
||||
<&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>,
|
||||
<&cru CLK_GMAC0_PTP_REF>;
|
||||
clock-names = "stmmaceth", "clk_mac_ref",
|
||||
"pclk_mac", "aclk_mac",
|
||||
"ptp_ref";
|
||||
power-domains = <&power RK3588_PD_GMAC>;
|
||||
resets = <&cru SRST_A_GMAC0>;
|
||||
reset-names = "stmmaceth";
|
||||
rockchip,grf = <&sys_grf>;
|
||||
rockchip,php-grf = <&php_grf>;
|
||||
snps,axi-config = <&gmac0_stmmac_axi_setup>;
|
||||
snps,mixed-burst;
|
||||
snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
|
||||
snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
|
||||
snps,tso;
|
||||
status = "disabled";
|
||||
|
||||
mdio0: mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
};
|
||||
|
||||
gmac0_stmmac_axi_setup: stmmac-axi-config {
|
||||
snps,blen = <0 0 0 0 16 8 4>;
|
||||
snps,wr_osr_lmt = <4>;
|
||||
snps,rd_osr_lmt = <8>;
|
||||
};
|
||||
|
||||
gmac0_mtl_rx_setup: rx-queues-config {
|
||||
snps,rx-queues-to-use = <2>;
|
||||
queue0 {};
|
||||
queue1 {};
|
||||
};
|
||||
|
||||
gmac0_mtl_tx_setup: tx-queues-config {
|
||||
snps,tx-queues-to-use = <2>;
|
||||
queue0 {};
|
||||
queue1 {};
|
||||
};
|
||||
};
|
||||
};
|
||||
3403
arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
Normal file
3403
arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
73
arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
Normal file
73
arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
Normal file
@@ -0,0 +1,73 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3588s.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa ROCK 5 Model A";
|
||||
compatible = "radxa,rock-5a", "rockchip,rk3588s";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-0 = <&gmac1_miim
|
||||
&gmac1_tx_bus2
|
||||
&gmac1_rx_bus2
|
||||
&gmac1_rgmii_clk
|
||||
&gmac1_rgmii_bus>;
|
||||
pinctrl-names = "default";
|
||||
tx_delay = <0x3a>;
|
||||
rx_delay = <0x3e>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@1 {
|
||||
/* RTL8211F */
|
||||
compatible = "ethernet-phy-id001c.c916";
|
||||
reg = <0x1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtl8211f_rst>;
|
||||
reset-assert-us = <20000>;
|
||||
reset-deassert-us = <100000>;
|
||||
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
rtl8211f {
|
||||
rtl8211f_rst: rtl8211f-rst {
|
||||
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
1703
arch/arm64/boot/dts/rockchip/rk3588s.dtsi
Normal file
1703
arch/arm64/boot/dts/rockchip/rk3588s.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user