Merge tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for a few reported issues. Included in
  here are:

   - xhci fix for a _much_ reported regression. I don't think there's a
     community distro that has not reported this problem yet :(

   - new USB quirk addition

   - cdns3 minor fixes

   - typec regression fix.

  All of these have been in linux-next with no reported problems, and
  the xhci fix has been reported by many to resolve their reported
  problem"

* tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
  usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
  usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
  USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
  xhci: Fix commad ring abort, write all 64 bits to CRCR register.

drivers/usb/cdns3/cdns3-gadget.c

@@ -337,19 +337,6 @@ static void cdns3_ep_inc_deq(struct cdns3_endpoint *priv_ep)
 	cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs);
 }
 
-static void cdns3_move_deq_to_next_trb(struct cdns3_request *priv_req)
-{
-	struct cdns3_endpoint *priv_ep = priv_req->priv_ep;
-	int current_trb = priv_req->start_trb;
-
-	while (current_trb != priv_req->end_trb) {
-		cdns3_ep_inc_deq(priv_ep);
-		current_trb = priv_ep->dequeue;
-	}
-
-	cdns3_ep_inc_deq(priv_ep);
-}
-
 /**
  * cdns3_allow_enable_l1 - enable/disable permits to transition to L1.
  * @priv_dev: Extended gadget object
@@ -1517,10 +1504,11 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
 
 		trb = priv_ep->trb_pool + priv_ep->dequeue;
 
-		/* Request was dequeued and TRB was changed to TRB_LINK. */
-		if (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) {
+		/* The TRB was changed as link TRB, and the request was handled at ep_dequeue */
+		while (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) {
 			trace_cdns3_complete_trb(priv_ep, trb);
-			cdns3_move_deq_to_next_trb(priv_req);
+			cdns3_ep_inc_deq(priv_ep);
+			trb = priv_ep->trb_pool + priv_ep->dequeue;
 		}
 
 		if (!request->stream_id) {

drivers/usb/cdns3/cdnsp-mem.c

@@ -987,6 +987,9 @@ int cdnsp_endpoint_init(struct cdnsp_device *pdev,
 
 	/* Set up the endpoint ring. */
 	pep->ring = cdnsp_ring_alloc(pdev, 2, ring_type, max_packet, mem_flags);
+	if (!pep->ring)
+		return -ENOMEM;
+
 	pep->skip = false;
 
 	/* Fill the endpoint context */

drivers/usb/host/xhci-ring.c

@@ -366,7 +366,9 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
 /* Must be called with xhci->lock held, releases and aquires lock back */
 static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 {
-	u32 temp_32;
+	struct xhci_segment *new_seg	= xhci->cmd_ring->deq_seg;
+	union xhci_trb *new_deq		= xhci->cmd_ring->dequeue;
+	u64 crcr;
 	int ret;
 
 	xhci_dbg(xhci, "Abort command ring\n");
@@ -375,13 +377,18 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 
 	/*
 	 * The control bits like command stop, abort are located in lower
-	 * dword of the command ring control register. Limit the write
-	 * to the lower dword to avoid corrupting the command ring pointer
-	 * in case if the command ring is stopped by the time upper dword
-	 * is written.
+	 * dword of the command ring control register.
+	 * Some controllers require all 64 bits to be written to abort the ring.
+	 * Make sure the upper dword is valid, pointing to the next command,
+	 * avoiding corrupting the command ring pointer in case the command ring
+	 * is stopped by the time the upper dword is written.
 	 */
-	temp_32 = readl(&xhci->op_regs->cmd_ring);
-	writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
+	next_trb(xhci, NULL, &new_seg, &new_deq);
+	if (trb_is_link(new_deq))
+		next_trb(xhci, NULL, &new_seg, &new_deq);
+
+	crcr = xhci_trb_virt_to_dma(new_seg, new_deq);
+	xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
 
 	/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
 	 * completion of the Command Abort operation. If CRR is not negated in 5

drivers/usb/typec/tcpm/tcpm.c

@@ -4110,11 +4110,7 @@ static void run_state_machine(struct tcpm_port *port)
 				       tcpm_try_src(port) ? SRC_TRY
 							  : SNK_ATTACHED,
 				       0);
-		else
-			/* Wait for VBUS, but not forever */
-			tcpm_set_state(port, PORT_RESET, PD_T_PS_SOURCE_ON);
 		break;
-
 	case SRC_TRY:
 		port->try_src_count++;
 		tcpm_set_cc(port, tcpm_rp_cc(port));