ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f7 series

Remove the following warnings seen when building with W=1.
Warning (unique_unit_address): /soc/timer@40000c00: duplicate unit-address
(also used in node /soc/timers@40000c00)
This approach is based on some discussions[1], to restructure the dtsi
and dts files.

Timer5 is enabled by default on stm32f7 series, to act as clockevent. In
order to get rid of the W=1 warning, and be compliant with dt-schemas
(e.g. dtbs_check):
- In stm32f746.dtsi:
  . Keep the more complete timers5 description
  . Remove the most simple timer5 node that is duplicate
- In each board:
  . adopt "st,stm32-timer" compatible for timers5, also add the interrupt
  . use /delete-property/ and /delete-node/ so the it matches the
    clockevent bindings

Note: all this is done in one shot (e.g. not split) to keep clockevent
functionality.

[1] https://lore.kernel.org/linux-arm-kernel/Yaf4jiZIp8+ndaXs@robh.at.kernel.org/

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

arch/arm/boot/dts/stm32746g-eval.dts

@@ -194,6 +194,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";

arch/arm/boot/dts/stm32f746-disco.dts

@@ -109,6 +109,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_b>;
 	pinctrl-names = "default";

arch/arm/boot/dts/stm32f746.dtsi

@@ -141,13 +141,6 @@
 			};
 		};
 
-		timer5: timer@40000c00 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000c00 0x400>;
-			interrupts = <50>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
-		};
-
 		timers5: timers@40000c00 {
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/stm32f769-disco.dts

@@ -137,6 +137,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";