mirror/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

arm64: dts: qcom: Add PM8550vs pmic dtsi

Browse Source 
Add nodes for PM8550vs in separate dtsi file.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-8-abel.vesa@linaro.org
This commit is contained in:
Neil Armstrong
2023-01-06 22:10:44 +02:00
committed by Bjorn Andersson
parent 8ba6d5d8f1
commit d6056ec543
1 changed files with 194 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

194
arch/arm64/boot/dts/qcom/pm8550vs.dtsi Normal file
View File

@@ -0,0 +1,194 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2022, Linaro Limited
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
/ {
thermal-zones {
pm8550vs-c-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm8550vs_c_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
pm8550vs-d-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm8550vs_d_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
pm8550vs-e-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm8550vs_e_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
pm8550vs-g-thermal {
polling-delay-passive = <100>;
polling-delay = <0>;
thermal-sensors = <&pm8550vs_g_temp_alarm>;
trips {
trip0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
trip1 {
temperature = <115000>;
hysteresis = <0>;
type = "hot";
};
};
};
};
};
&spmi_bus {
pm8550vs_c: pmic@2 {
compatible = "qcom,pm8550", "qcom,spmi-pmic";
reg = <0x2 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8550vs_c_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_c_gpios: gpio@8800 {
compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pm8550vs_c_gpios 0 0 6>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550vs_d: pmic@3 {
compatible = "qcom,pm8550", "qcom,spmi-pmic";
reg = <0x3 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8550vs_d_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_d_gpios: gpio@8800 {
compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pm8550vs_d_gpios 0 0 6>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550vs_e: pmic@4 {
compatible = "qcom,pm8550", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8550vs_e_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_e_gpios: gpio@8800 {
compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pm8550vs_e_gpios 0 0 6>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pm8550vs_g: pmic@6 {
compatible = "qcom,pm8550", "qcom,spmi-pmic";
reg = <0x6 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8550vs_g_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};
pm8550vs_g_gpios: gpio@8800 {
compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&pm8550vs_g_gpios 0 0 6>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};