Check flag conf IEEE80211_CONF_OFFCHANNEL so that RSSI doesn't swing wildly
on scanning.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Endian conversion now happens at run time only little endian
values are valid.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use spin_lock_irqsave and spin_unlock_irqrestore
in functions TimerSQ3CallBack and TimerState1CallBack
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wake up to listen to next beacon when struct ieee80211_conf -> listen_interval == 1
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To maintain functionality
typedef enum _CARD_PHY_TYPE should have the same values as
typedef enum _VIA_PKT_TYPE
TODO both these types need merging.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use basic_rates to find cck and ofdm rates.
wBasicRate will be removed later.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CARDbSetPhyParameter appears to use two different strutures to find supported
rates.
Remove PWLAN_IE_SUPP_RATES and use basic_rates to find rates supported.
mac80211 now sets bShortSlotTime, bBarkerPreambleMd and byPreambleType remove
these.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert PSvEnablePowerSaving and PSvEnablePowerSaving
Remove mgmt->wCurrAID and use pDevice->current_aid
We nolonger send the PSbSendNullPacket.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove call to sChannelTbl, the channel under mac80211 is always valid.
CARDbSetPhyParameter is nolonger set here.
RFbSetPower is now set on byBBType
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove net device code.
Remove current measure code and function s_vCompleteCurrentMeasure
and switch code which are now handled by mac80211
Change beaconing to mac80211.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add rates and channels according to rf type for vnt_init_bands which is a
mac80211 replacement for init_channel_table.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace existing vt6655_probe with one converted to mac80211
with the following operations
vnt_tx_80211
vnt_start
vnt_stop
vnt_add_interface
vnt_remove_interface
vnt_config
vnt_bss_info_changed
vnt_prepare_multicast
vnt_configure
vnt_set_key
vnt_get_tsf
vnt_set_tsf
vnt_reset_tsf
The following variables are also added.
basic_rates
mc_list_count
mac_hw
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace variable wCurrentRate with is_pspoll.
add current_aid to structure vnt_private which is to be used by
mac80211 operations.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Covert to handle mac80211 sk_buff data removing fragmentation processing
via s_vFillFragParameter and calls to vGenerateMACHeader and s_vSWencryption
fragmentation is now handled by mac80211.
There is still more todos with this function when legacy net device code
have been remove from driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vnt_fill_txkey a mac80211 repacement for s_vFillTxKey
vnt_generate_fifo_header mac80211 replacement for vGenerateFIFOHeader
vnt_beacon_make for making and despatching beacon.
vnt_beacon_enable to enabling beacon
struct vnt_tx_fifo_head is also added to replace typedef
struct tagSTxBufHead that will be removed later.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vnt_key_init_table to initialize the table
vnt_set_keys to set the keys
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vnt_receive_frame which replaces device_receive_frame
and vnt_rx_data which handles mac80211 rx data
structures ieee80211_hw, ieee80211_vif and variable rx_rate are added
in structure vnt_private
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following errors and warnings
identified by checkpatch.pl:
WARNING: please, no spaces at the start of a line
814: FILE: ft1000_hw.c:814:
tempword = ft1000_read_reg(dev, FT1000_REG_DOORBELL);$
WARNING: please, no spaces at the start of a line
815: FILE: ft1000_hw.c:815:
i=0;$
ERROR: spaces required around that '=' (ctx:VxV)
815: FILE: ft1000_hw.c:815:
i=0;
WARNING: please, no spaces at the start of a line
816: FILE: ft1000_hw.c:816:
while (tempword & FT1000_DB_DPRAM_TX) {$
ERROR: code indent should use tabs where possible
817: FILE: ft1000_hw.c:817:
mdelay(10);$
WARNING: please, no spaces at the start of a line
817: FILE: ft1000_hw.c:817:
mdelay(10);$
ERROR: code indent should use tabs where possible
818: FILE: ft1000_hw.c:818:
i++;$
WARNING: please, no spaces at the start of a line
818: FILE: ft1000_hw.c:818:
i++;$
ERROR: code indent should use tabs where possible
819: FILE: ft1000_hw.c:819:
if (i==10) {$
WARNING: please, no spaces at the start of a line
819: FILE: ft1000_hw.c:819:
if (i==10) {$
WARNING: suspect code indent for conditional statements (8, 12)
819: FILE: ft1000_hw.c:819:
if (i==10) {
spin_unlock_irqrestore(&info->dpram_lock, flags);
ERROR: spaces required around that '==' (ctx:VxV)
819: FILE: ft1000_hw.c:819:
if (i==10) {
ERROR: code indent should use tabs where possible
820: FILE: ft1000_hw.c:820:
spin_unlock_irqrestore(&info->dpram_lock, flags);$
WARNING: please, no spaces at the start of a line
820: FILE: ft1000_hw.c:820:
spin_unlock_irqrestore(&info->dpram_lock, flags);$
ERROR: code indent should use tabs where possible
821: FILE: ft1000_hw.c:821:
return;$
WARNING: please, no spaces at the start of a line
821: FILE: ft1000_hw.c:821:
return;$
ERROR: code indent should use tabs where possible
822: FILE: ft1000_hw.c:822:
}$
WARNING: please, no spaces at the start of a line
822: FILE: ft1000_hw.c:822:
}$
ERROR: code indent should use tabs where possible
823: FILE: ft1000_hw.c:823:
tempword = ft1000_read_reg(dev, FT1000_REG_DOORBELL);$
WARNING: please, no spaces at the start of a line
823: FILE: ft1000_hw.c:823:
tempword = ft1000_read_reg(dev, FT1000_REG_DOORBELL);$
WARNING: please, no spaces at the start of a line
824: FILE: ft1000_hw.c:824:
}$
Signed-off-by: Nicky Chorley <ndchorley@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
