A patch for s626.c to fix some of the warnings
reported by the checkpatch.pl tool, namely,
printk() should include KERN_ facility level
unnecessary whitespace before a quoted newline
Signed-off-by: John Sheehan <john.d.sheehan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A patch for unioxx5.c which fixes "trailing statements
should be on next line" errors raised by the
chechpatch.pl tool
Signed-off-by: John Sheehan <john.d.sheehan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes some long line lengths in gsc_hpdi.c as found by the
checkpatch.pl tool
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch cleans up some various warnings generated from checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These checks are obviously pointless because kfree() can handle null
dereferences.
But really the main problem is that if the pointers were null that would
cause problems on the ealier lines. The dereferences would cause an
oops and the _release() functions use ->priv to determine which IRQ to
free. I looked into it and quite a few of the detach functions assume
link->priv is non-null. It seems like we can remove these checks.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reduce stack usage in serial_2002_open() by allocating dig_in_config,
dig_out_config, chan_in_config, and chan_out_config temporary arrays
using kcalloc() and freeing them when done with.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The comedi device 'detach' method for the serial2002 driver has an
off-by-one error in its loop for freeing data belonging to its
subdevices. Fix it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The comedi device 'open' method for the serial2002 driver frees any old
'maxdata_list' and 'range_table_list' arrays belonging to a subdevice
and allocates them again, but was missing checks for allocation failure.
If an allocation fails, free the 'maxdata_list' and 'range_table_list'
arrays for all subdevices and return an error.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some comedi drivers should return an error from their 'open' method when
something goes wrong. Change the prototype of the 'open' method in
'struct comedi_device' to allow this, and change the drivers that use it.
Propagate any error to the 'open' file operation.
The corresponding 'close' method won't be called when the 'open' method
fails, so drivers failing the 'open' need to clean up any mess they
created.
The dt9812 and serial2002 drivers can now return an error on 'open'.
The jr3_pci driver also uses the 'open' method but doesn't fail it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the interrupt layer onto the initial trout gpio
changes.
There changes were adapted from the Google driver which lists
Arve Hjønnevåg <arve@android.com> as the author.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
This is a patch to the ni_tio.c file that fixes a brace warning found by
the checkpatch.pl tool
Signed-off-by: Samuel Richardson <sam.j.richardson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lenovo IdeaPad Y430 has an additional subwoofer connected at pin 0x1b,
which isn't muted when headphone is plugged in. This adds additional
support to the extra subwoofer via new ideapad model.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi,
A user reported a kernel bug when running a particular program that did
the following:
created 32 threads
- each thread took a mutex, grabbed a global offset, added a buffer size
to that offset, released the lock
- read from the given offset in the file
- created a new thread to do the same
- exited
The result is that cfq's close cooperator logic would trigger, as the
threads were issuing I/O within the mean seek distance of one another.
This workload managed to routinely trigger a use after free bug when
walking the list of merge candidates for a particular cfqq
(cfqq->new_cfqq). The logic used for merging queues looks like this:
static void cfq_setup_merge(struct cfq_queue *cfqq, struct cfq_queue *new_cfqq)
{
int process_refs, new_process_refs;
struct cfq_queue *__cfqq;
/* Avoid a circular list and skip interim queue merges */
while ((__cfqq = new_cfqq->new_cfqq)) {
if (__cfqq == cfqq)
return;
new_cfqq = __cfqq;
}
process_refs = cfqq_process_refs(cfqq);
/*
* If the process for the cfqq has gone away, there is no
* sense in merging the queues.
*/
if (process_refs == 0)
return;
/*
* Merge in the direction of the lesser amount of work.
*/
new_process_refs = cfqq_process_refs(new_cfqq);
if (new_process_refs >= process_refs) {
cfqq->new_cfqq = new_cfqq;
atomic_add(process_refs, &new_cfqq->ref);
} else {
new_cfqq->new_cfqq = cfqq;
atomic_add(new_process_refs, &cfqq->ref);
}
}
When a merge candidate is found, we add the process references for the
queue with less references to the queue with more. The actual merging
of queues happens when a new request is issued for a given cfqq. In the
case of the test program, it only does a single pread call to read in
1MB, so the actual merge never happens.
Normally, this is fine, as when the queue exits, we simply drop the
references we took on the other cfqqs in the merge chain:
/*
* If this queue was scheduled to merge with another queue, be
* sure to drop the reference taken on that queue (and others in
* the merge chain). See cfq_setup_merge and cfq_merge_cfqqs.
*/
__cfqq = cfqq->new_cfqq;
while (__cfqq) {
if (__cfqq == cfqq) {
WARN(1, "cfqq->new_cfqq loop detected\n");
break;
}
next = __cfqq->new_cfqq;
cfq_put_queue(__cfqq);
__cfqq = next;
}
However, there is a hole in this logic. Consider the following (and
keep in mind that each I/O keeps a reference to the cfqq):
q1->new_cfqq = q2 // q2 now has 2 process references
q3->new_cfqq = q2 // q2 now has 3 process references
// the process associated with q2 exits
// q2 now has 2 process references
// queue 1 exits, drops its reference on q2
// q2 now has 1 process reference
// q3 exits, so has 0 process references, and hence drops its references
// to q2, which leaves q2 also with 0 process references
q4 comes along and wants to merge with q3
q3->new_cfqq still points at q2! We follow that link and end up at an
already freed cfqq.
So, the fix is to not follow a merge chain if the top-most queue does
not have a process reference, otherwise any queue in the chain could be
already freed. I also changed the logic to disallow merging with a
queue that does not have any process references. Previously, we did
this check for one of the merge candidates, but not the other. That
doesn't really make sense.
Without the attached patch, my system would BUG within a couple of
seconds of running the reproducer program. With the patch applied, my
system ran the program for over an hour without issues.
This addresses the following bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=16217
Thanks a ton to Phil Carns for providing the bug report and an excellent
reproducer.
[ Note for stable: this applies to 2.6.32/33/34 ].
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Phil Carns <carns@mcs.anl.gov>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The PMIC Battery driver provides battery charging and battery gauge
functionality on Intel MID platforms. This provides the basic functions.
There are some USB drivers to merge before the selection of charging
between the different USB power levels can be enabled.
Moved to a platform device by Alek Du.
Signed-off-by: Nithish Mahalingam <nithish.mahalingam@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Chris Wedgwood reports that 39c0cbe (sched: Rate-limit nohz) causes a
serial console regression, unresponsiveness, and indeed it does. The
reason is that the nohz code is skipped even when the tick was already
stopped before the nohz_ratelimit(cpu) condition changed.
Move the nohz_ratelimit() check to the other conditions which prevent
long idle sleeps.
Reported-by: Chris Wedgwood <cw@f00f.org>
Tested-by: Brian Bloniarz <bmb@athenacr.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Jef Driesen <jefdriesen@telenet.be>
LKML-Reference: <1276790557.27822.516.camel@twins>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
At exit, perf record will kill the process it was profiling by sending a
SIGTERM to child_pid (if it had been initialised), but in certain situations
child_pid may be 0 and perf would mistakenly kill more processes than intended.
child_pid is set to the return of fork() to either 0 or the pid of the child.
Ordinarily this would not present an issue as the child calls execvp to spawn
the process to be profiled and would therefore never run it's sig_atexit and
never attempt to kill pid 0.
However, if a nonexistant binary had been passed in to perf record the call to
execvp would fail and child_pid would be left set to 0. The child would then
exit and it's atexit handler, finding that child_pid was initialised to 0,
would call kill(0, SIGTERM), resulting in every process within it's process
group being killed.
In the case that perf was being run directly from the shell this typically
would not be an issue as the shell isolates the process. However, if perf was
being called from another program it could kill unexpected processes, which may
even include X.
This patch changes the logic of the test for whether child_pid was initialised
to only consider positive pids as valid, thereby never attempting to kill pid
0.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1276072680-17378-1-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the incremental osdmap has a new crush map, advance the position after
decoding so that we can parse the rest of the osdmap properly.
Signed-off-by: Sage Weil <sage@newdream.net>
If we cannot open our data file, print strerror(errno) for a more
comprehensible error message; and only suggest 'perf record' on ENOENT.
In particular, this fixes the nonsensical advice when:
% sudo perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.009 MB perf.data (~381 samples) ]
% perf trace
failed to open file: perf.data (try 'perf record' first)
%
Cc: Ingo Molnar <mingo@elte.hu>
LPU-Reference: <20100612033615.GA24731@hexapodia.org>
Signed-off-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The loop counter math in trace_event was much more complicated than
necessary, resulting in incorrectly decoding the human-readable
portion of the partial last line of hexdump in "perf trace -D" output:
. 0020: 00 00 00 00 00 00 00 00 2f 73 62 69 6e 2f 69 6e ......../sbin/i
. 0030: 69 74 00 00 00 00 00 00 /sbin/i
With this fixed (and simpler!) code, we get the correct output:
. 0020: 00 00 00 00 00 00 00 00 2f 73 62 69 6e 2f 69 6e ......../sbin/in
. 0030: 69 74 00 00 00 00 00 00 it......
Cc: Ingo Molnar <mingo@elte.hu>
LPU-Reference: <20100612024404.GA24469@hexapodia.org>
Signed-off-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After commit 9630bdd9b1
(ACPI: Use GPE reference counting to support shared GPEs) the wakeup
enable mask bits of GPEs are set as soon as the GPEs are enabled to
wake up the system. Unfortunately, this leads to a regression
reported by Michal Hocko, where a system is woken up from ACPI S5 by
a device that is not supposed to do that, because the wakeup enable
mask bit of this device's GPE is always set when
acpi_enter_sleep_state() calls acpi_hw_enable_all_wakeup_gpes(),
although it should only be set if the device is supposed to wake up
the system from the target state.
To work around this issue, rework the ACPI power management code so
that GPEs are not enabled to wake up the system upfront, but only
during a system state transition when the target state of the system
is known. [Of course, this means that the reference counting of
"wakeup" GPEs doesn't really make sense and it is sufficient to
set/unset the wakeup mask bits for them during system sleep
transitions. This will allow us to simplify the GPE handling code
quite a bit, but that change is too intrusive for 2.6.35.]
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15951
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Len Brown <len.brown@intel.com>
For certain set of register, base window addresses are not defined.
In such cases window should not set.
Return with error for such cases to avoid NMI.
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a race between netif_stop_queue and netif_stopped_queue
check. So check once again if buffers are available to avoid race.
With above logic we can also get rid of tx lock in process_cmd_ring.
Signed-off-by: Rajesh K Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Earlier all poll routine can process rx and tx, But now
one poll routine to process rx + tx and other for rx only.
Last msix vector will be used for separate tx interrupt.
o This is supported from fw version 4.4.2.
o Bump version 5.0.5
Signed-off-by: Sony Chacko <schacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During device soft reset, don't halt every device block.
Access to some blocks is required during recovery.
Signed-off-by: Sucheta Chakraborty <sucheta@dut4145.unminc.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This removes dma_get_ops() prefetch optimization in bnx2.
bnx2 uses dma_get_ops() to see if dma_sync_single_for_cpu() is
noop. bnx2 does prefetch if it's noop.
But dma_get_ops() isn't available on all the architectures (only the
architectures that uses dma_map_ops struct have it). Using
dma_get_ops() in drivers leads to compilation breakage on many
architectures.
This patch removes dma_get_ops() and changes bnx2 to do prefetch on
all the architectures. This adds useless prefetch on non-coherent
architectures but this is harmless. It is also unlikely to cause the
performance drop.
[ Remove now unused local variable 'pdev' -DaveM ]
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The probe plugin requires access to the source code for some operations. The
source code must be in the exact same location as specified by the DWARF tags,
but sometimes the location is an absolute path that cannot be replicated by a
normal user. This change adds the -s|--source option to allow the user to
specify the root of the kernel source tree.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1276543590-10486-1-git-send-email-chase.douglas@canonical.com>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are situations where there is enough information in the perf.data
to process the samples. Updating the buildid cache may add unecessary
overhead in terms of disk space and time (copying large elf images).
A persistent option to do this already exists via the perfconfig file,
simply do:
[buildid]
dir = /dev/null
This patch provides a way to suppress builid cache updates on a per-run
basis. It addds a new option, -N, to perf record. Buildids are still
generated in the perf.data file.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4c19ef89.93ecd80a.40dc.fffff8e9@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently symbol resolution does not work for 64-bit programs on architectures
that use function descriptors such as ppc64.
The problem is that a symbol doesn't point to a text address, it points to a
data area that contains (amongst other things) a pointer to the text address.
We look for a section called ".opd" which is the function descriptor area. To
create the full symbol table, when we see a symbol in the function descriptor
section we load the first pointer and use that as the text address.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1276523793-15422-1-git-send-email-ebmunson@us.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Eric B Munson <ebmunson@us.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move them to a session->dead_threads list just like we do with maps that
are replaced, because we may have hist_entries pointing to them.
This fixes a bug when inserting maps for a new thread that reused the
TID, mixing maps for two different threads, causing an endless loop.
The code for insering maps should be made more robust but for .35 this
is the minimalistic patch.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch reworks the probe() function in the at32ap700x_wdt driver, this to
make sure the miscdev is properly initialized and the driver is ready to be
accessed.
Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Wim Van sebroeck <wim@iguana.be>
This adds missing registers to the list of corrupted registers and
removes a wrong comment about r9 on entry
While at it the formatting of the comment to cache_off is changed to
resemble the other two.
Acked-by: Eric Miao <eric.miao@canonical.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This is a partial revert of 421f91d21a ("fix typos concerning "initiali[zs]e"),
as we don't want to touch staging drivers from other trees than staging itself.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Probably the register content for cache operations is "don't care" in
practice, but as r1 is explicitly zeroed, use that one.
Acked-by: Eric Miao <eric.miao@canonical.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
__armv3_mpu_cache_on seems broken. As there is noone around who knows
about these machines just keep the code as is but point out the strange
things.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Filesystems assume that DISCARD_BARRIER are full barriers, so that they
don't have to track in-progress discard operation when submitting new I/O.
But currently we only treat them as elevator barriers, which don't
actually do the nessecary queue drains.
Also remove the unlikely around both the DISCARD and BARRIER requests -
the happen far too often for a static mispredict.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Fix the following two trivial bugs in pcpu_build_alloc_info()
* we should memset group_cnt to 0 by size of group_cnt, not size of
group_map (both are of the same size, so the bug isn't dangerous)
* we can delete useless variable group_cnt_max.
Signed-off-by: Pavel V. Panteleev <pp_84@mail.ru>
Signed-off-by: Tejun Heo <tj@kernel.org>
