If the console suspend is disabled, the genpd of the console shall not
be powered-off during suspend.
Set the flag GENPD_FLAG_ALWAYS_ON to the corresponding genpd during
suspend, and restore the original value during the resume.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20231017130540.1149721-1-thomas.richard@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On unplug of a Xen console, xencons_disconnect_backend() unconditionally
calls free_irq() via unbind_from_irqhandler(), causing a warning of
freeing an already-free IRQ:
(qemu) device_del con1
[ 32.050919] ------------[ cut here ]------------
[ 32.050942] Trying to free already-free IRQ 33
[ 32.050990] WARNING: CPU: 0 PID: 51 at kernel/irq/manage.c:1895 __free_irq+0x1d4/0x330
It should be using evtchn_put() to tear down the event channel binding,
and let the Linux IRQ side of it be handled by notifier_del_irq() through
the HVC code.
On which topic... xencons_disconnect_backend() should call hvc_remove()
*first*, rather than tearing down the event channel and grant mapping
while they are in use. And then the IRQ is guaranteed to be freed by
the time it's torn down by evtchn_put().
Since evtchn_put() also closes the actual event channel, avoid calling
xenbus_free_evtchn() except in the failure path where the IRQ was not
successfully set up.
However, calling hvc_remove() at the start of xencons_disconnect_backend()
still isn't early enough. An unplug request is indicated by the backend
setting its state to XenbusStateClosing, which triggers a notification
to xencons_backend_changed(), which... does nothing except set its own
frontend state directly to XenbusStateClosed without *actually* tearing
down the HVC device or, you know, making sure it isn't actively in use.
So the backend sees the guest frontend set its state to XenbusStateClosed
and stops servicing the interrupt... and the guest spins for ever in the
domU_write_console() function waiting for the ring to drain.
Fix that one by calling hvc_remove() from xencons_backend_changed() before
signalling to the backend that it's OK to proceed with the removal.
Tested with 'dd if=/dev/zero of=/dev/hvc1' while telling Qemu to remove
the console device.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-4-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xen_hvc_init() function should always register the frontend driver,
even when there's no primary console — as there may be secondary consoles.
(Qemu can always add secondary consoles, but only the toolstack can add
the primary because it's special.)
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-3-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xencons_connect_backend() function allocates a local interdomain
event channel with xenbus_alloc_evtchn(), then calls
bind_interdomain_evtchn_to_irq_lateeoi() to bind to that port# on the
*remote* domain.
That doesn't work very well:
(qemu) device_add xen-console,id=con1,chardev=pty0
[ 44.323872] xenconsole console-1: 2 xenbus_dev_probe on device/console/1
[ 44.323995] xenconsole: probe of console-1 failed with error -2
Fix it to use bind_evtchn_to_irq_lateeoi(), which does the right thing
by just binding that *local* event channel to an irq. The backend will
do the interdomain binding.
This didn't affect the primary console because the setup for that is
special — the toolstack allocates the guest event channel and the guest
discovers it with HVMOP_get_param.
Fixes: fe415186b4 ("xen/console: harden hvc_xen against event channel storms")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231020161529.355083-2-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move PCI_DEVICE_ID macros to the top so that these macros can be used
throughout 8250_pci.c
Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@moxa.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231018091739.10125-4-crescentcy.hsieh@moxa.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add rs485-rts-active-high property, this is a legacy property
used by 8250_omap.
This fixes the following make dt_binding_check warning:
Documentation/devicetree/bindings/serial/8250_omap.yaml:
rs485-rts-active-high: missing type definition
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdUkPiA=o_QLyuwsTYW7y1ksCjHAqyNSHFx2QZ-dP-HGsQ@mail.gmail.com/
Fixes: 403e97d6ab ("dt-bindings: serial: 8250_omap: add rs485-rts-active-high")
Cc: stable <stable@kernel.org>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231019154834.41721-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When support for various old platforms was removed in commit
1ea35b3557 ("ARM: s3c: remove s3c24xx specific hacks"),
s3c24xx_serial_ops also became unused here because nothing sets port
type TYPE_S3C24XX anymore.
Remove s3c24xx_serial_ops and all the code that's unreachable now.
Fixes: 1ea35b3557 ("ARM: s3c: remove s3c24xx specific hacks")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20231019100901.4026680-1-andre.draszik@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tabs were used in the function description, to make this look more
uniform, the tabs were replaced by spaces where necessary.
While we're at it, I also replaced the 'ndashes' with simple dashes, since
only those are supported by sphinx.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Link: https://lore.kernel.org/r/20231019112809.881730-2-fe@dev.tdt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
esp32s3 variant of the esp32 UART has limited baudrate divisor range
that does not allow it to use 9600 and lower rates with 40MHz input
clock. Use clock prescaler present in this UART variant to help with
that.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20231018191252.1551972-1-jcmvbkbc@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DT schema coding convention expressed in
Documentation/devicetree/bindings/example-schema.yaml expects entries in
following order:
- properties, patternProperties
- required
- if blocks, allOf with if-blocks
- additionalProperties/unevaluatedProperties
Re-order few schemas to match the convention to avoid repeating review
comments for new patches using existing code as template. No functional
changes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231016181909.368429-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Separating the VGA console screen_info from the EFI one unfortunately
caused a build failure for footbridge that I had never caught
with randconfig builds:
arch/arm/kernel/setup.c:932:27: error: static declaration of 'vgacon_screen_info' follows non-static declaration
932 | static struct screen_info vgacon_screen_info = {
| ^~~~~~~~~~~~~~~~~~
In file included from arch/arm/kernel/setup.c:44:
arch/arm/include/asm/setup.h:40:27: note: previous declaration of 'vgacon_screen_info' with type 'struct screen_info'
40 | extern struct screen_info vgacon_screen_info;
| ^~~~~~~~~~~~~~~~~~
arm-linux-gnueabi-ld: drivers/video/console/dummycon.o: in function `dummycon_init':
dummycon.c:(.text+0xe4): undefined reference to `screen_info'
Make sure the variable is global to avoid the conflict with the extern
declaration, and make it work in dummycon.c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231017093947.3627976-2-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the vga console no longer relies on global screen_info, there are
only two remaining use cases:
- on the x86 architecture, it is used for multiple boot methods
(bzImage, EFI, Xen, kexec) to commucate the initial VGA or framebuffer
settings to a number of device drivers.
- on other architectures, it is only used as part of the EFI stub,
and only for the three sysfb framebuffers (simpledrm, simplefb, efifb).
Remove the duplicate data structure definitions by moving it into the
efi-init.c file that sets it up initially for the EFI case, leaving x86
as an exception that retains its own definition for non-EFI boots.
The added #ifdefs here are optional, I added them to further limit the
reach of screen_info to configurations that have at least one of the
users enabled.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231017093947.3627976-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While adding a preferred console handling for serial_core for serial port
hardware based device addressing, Jiri suggested we constify name for
add_preferred_console(). The name gets copied anyways. This allows serial
core to add a preferred console using serial drv->dev_name without copying
it.
Note that constifying options causes changes all over the place because of
struct console for match().
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231012064300.50221-2-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Let's check for valid console index values for preferred console to avoid
bogus console index numbers from kernel command line.
Let's also return an error for negative index numbers for the preferred
console. Unlike for device drivers, a negative index is not valid for the
preferred console.
Let's also constify idx while at it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231012064300.50221-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The two hyperv framebuffer drivers (hyperv_fb or hyperv_drm_drv) access the
global screen_info in order to take over from the sysfb framebuffer, which
in turn could be handled by simplefb, simpledrm or efifb. Similarly, the
vmbus_drv code marks the original EFI framebuffer as reserved, but this
is not required if there is no sysfb.
As a preparation for making screen_info itself more local to the sysfb
helper code, add a compile-time conditional in all three files that relate
to hyperv fb and just skip this code if there is no sysfb that needs to
be unregistered.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-9-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I noticed that commit 0db5b61e0d ("fbdev/vga16fb: Create
EGA/VGA devices in sysfb code") broke vga16fb on non-x86 platforms,
because the sysfb code never creates a vga-framebuffer device when
screen_info.orig_video_isVGA is set to '1' instead of VIDEO_TYPE_VGAC.
However, it turns out that the only architecture that has allowed
building vga16fb in the past 20 years is powerpc, and this only worked
on two 32-bit platforms and never on 64-bit powerpc. The last machine
that actually used this was removed in linux-3.10, so this is all dead
code and can be removed.
The big-endian support in vga16fb.c could also be removed, but I'd just
leave this in place.
Fixes: 933ee7119f ("powerpc: remove PReP platform")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-8-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To prepare for completely separating the VGA console screen_info from
the one used in EFI/sysfb, rename the vgacon instances and make them
local as much as possible.
ia64 and arm both have confurations with vgacon and efi, but the contents
never overlaps because ia64 has no EFI framebuffer, and arm only has
vga console on legacy platforms without EFI. Renaming these is required
before the EFI screen_info can be moved into drivers/firmware.
The ia64 vga console is actually registered in two places from
setup_arch(), but one of them is wrong, so drop the one in pcdp.c and
fix the one in setup.c to use the correct conditional.
x86 has to keep them together, as the boot protocol is used to switch
between VGA text console and framebuffer through the screen_info data.
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-7-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vga console driver is fairly self-contained, and only used by
architectures that explicitly initialize the screen_info settings.
Chance every instance that picks the vga console by setting conswitchp
to call a function instead, and pass a reference to the screen_info
there.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Khalid Azzi <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-6-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A number of architectures either kept the screen_info definition for
historical purposes as it used to be required by the generic VT code, or
they copied it from another architecture in order to build the VGA console
driver in an allmodconfig build. The mips definition is used by some
platforms, but the initialization on jazz is not needed.
Now that vgacon no longer builds on these architectures, remove the
stale definitions and initializations.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-5-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dummycon default console size used to be determined by architecture,
but now this is a Kconfig setting on everything except ARM. Tracing this
back in the historic git trees, this was used to match the size of VGA
console or VGA framebuffer on early machines, but nowadays that code is
no longer used, except probably on the old footbridge/netwinder since
that is the only one that supports vgacon.
On machines with a framebuffer, booting with DT so far results in always
using the hardcoded 80x30 size in dummycon, while on ATAGS the setting
can come from a bootloader specific override. Both seem to be worse
choices than the Kconfig setting, since the actual text size for fbcon
also depends on the selected font.
Make this work the same way as everywhere else and use the normal
Kconfig setting, except for the footbridge with vgacon, which keeps
using the traditional code. If vgacon is disabled, footbridge can
also ignore the setting. This means the screen_info only has to be
provided when either vgacon or EFI are enabled now.
To limit the amount of surprises on Arm, change the Kconfig default
to the previously used 80x30 setting instead of the usual 80x25.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-4-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On non-x86 architectures, the screen_info variable is generally only
used for the VGA console where supported, and in some cases the EFI
framebuffer or vga16fb.
Now that we have a definite list of which architectures actually use it
for what, use consistent #ifdef checks so the global variable is only
defined when it is actually used on those architectures.
Loongarch and riscv have no support for vgacon or vga16fb, but
they support EFI firmware, so only that needs to be checked, and the
initialization can be removed because that is handled by EFI.
IA64 has both vgacon and EFI, though EFI apparently never uses
a framebuffer here.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Khalid Aziz <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-3-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The list of dependencies here is phrased as an opt-out, but this is missing
a lot of architectures that don't actually support VGA consoles, and some
of the entries are stale:
- powerpc used to support VGA consoles in the old arch/ppc codebase, but
the merged arch/powerpc never did
- arm lists footbridge, integrator and netwinder, but netwinder is actually
part of footbridge, and integrator does not appear to have an actual
VGA hardware, or list it in its ATAG or DT.
- mips has a few platforms (malta, sibyte, and sni) that initialize
screen_info, on everything else the console is selected but cannot
actually work.
- csky, hexgagon, loongarch, nios2, riscv and xtensa are not listed
in the opt-out table and declare a screen_info to allow building
vga_con, but this cannot work because the console is never selected.
Replace this with an opt-in table that lists only the platforms that
remain. This is effectively x86, plus a couple of historic workstation
and server machines that reused parts of the x86 system architecture.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Khalid Aziz <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20231009211845.3136536-2-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add documentation for the ESP32S3 USB CDC-ACM gadget controller.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231010085926.1021667-5-jcmvbkbc@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uart_get_baud_rate has input parameters 'min' and 'max' limiting the
range of acceptable baud rates from the caller's perspective. If neither
current or old termios structures have acceptable baud rate setting and
9600 is not in the min/max range either the function returns 0 and
issues a warning.
However for a UART that does not support speed of 9600 baud this is
expected behavior.
Clarify that 0 can be (and always could be) returned from the
uart_get_baud_rate. Don't issue a warning in that case.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20231010085926.1021667-2-jcmvbkbc@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zynq UG585 states, in chapter B.33, for XUARTPS_CR_STARTBRK:
It can only be set if STPBRK (Stop transmitter break) is not high
This fixes tcsendbreak, which otherwise does not actually break.
Signed-Off-By: Julien Malik <julien.malik@unseenlabs.fr>
Link: https://lore.kernel.org/r/20230624210323.88455-1-julien.malik@unseenlabs.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'allOf' block should go after the 'required' block according to DT
bindings best practices.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013141925.3427158-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert binding from text format to YAML.
Additions to original text binding:
- add rs485 reference.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231012152647.2607455-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the tty/serial fixes in here as well for testing, and this
resolves merge conflicts in:
drivers/tty/serial/serial_core.c
as reported in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 45e34c8af5, and the
two subsequent fixes to it:
3f874c9b2a ("x86/smp: Don't send INIT to non-present and non-booted CPUs")
b1472a60a5 ("x86/smp: Don't send INIT to boot CPU")
because it seems to result in hung machines at shutdown. Particularly
some Dell machines, but Thomas says
"The rest seems to be Lenovo and Sony with Alderlake/Raptorlake CPUs -
at least that's what I could figure out from the various bug reports.
I don't know which CPUs the DELL machines have, so I can't say it's a
pattern.
I agree with the revert for now"
Ashok Raj chimes in:
"There was a report (probably this same one), and it turns out it was a
bug in the BIOS SMI handler.
The client BIOS's were waiting for the lowest APICID to be the SMI
rendevous master. If this is MeteorLake, the BSP wasn't the one with
the lowest APIC and it triped here.
The BIOS change is also being pushed to others for assimilation :)
Server BIOS's had this correctly for a while now"
and it does look likely to be some bad interaction between SMI and the
non-BSP cores having put into INIT (and thus unresponsive until reset).
Link: https://bbs.archlinux.org/viewtopic.php?pid=2124429
Link: https://www.reddit.com/r/openSUSE/comments/16qq99b/tumbleweed_shutdown_did_not_finish_completely/
Link: https://forum.artixlinux.org/index.php/topic,5997.0.html
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2241279
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 295525e29a ("virtio_net: merge dma operations when filling
mergeable buffers") unmaps the buffer with DMA_ATTR_SKIP_CPU_SYNC when
the dma->ref is zero. We do that with DMA_ATTR_SKIP_CPU_SYNC, because we
do not want to do the sync for the entire page_frag. But that misses the
sync for the current area.
This patch does cpu sync regardless of whether the ref is zero or not.
Fixes: 295525e29a ("virtio_net: merge dma operations when filling mergeable buffers")
Reported-by: Michael Roth <michael.roth@amd.com>
Closes: http://lore.kernel.org/all/20230926130451.axgodaa6tvwqs3ut@amd.com
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are some USB and Thunderbolt driver fixes for 6.6-rc6 to resolve a
number of small reported issues. Included in here are:
- thunderbolt driver fixes
- xhci driver fixes
- cdns3 driver fixes
- musb driver fixes
- a number of typec driver fixes
- a few other small driver fixes
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZSwElQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylx7ACgthY1JVY+YL61s2CBKgSdVJ7eAJUAnjnFwSy4
KTcgnEAnFlm/xpfVgHwA
=2xN2
-----END PGP SIGNATURE-----
Merge tag 'usb-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB and Thunderbolt driver fixes for 6.6-rc6 to resolve
a number of small reported issues. Included in here are:
- thunderbolt driver fixes
- xhci driver fixes
- cdns3 driver fixes
- musb driver fixes
- a number of typec driver fixes
- a few other small driver fixes
All of these have been in linux-next with no reported issues"
* tag 'usb-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scope
usb: typec: ucsi: Fix missing link removal
usb: typec: altmodes/displayport: Signal hpd low when exiting mode
xhci: Preserve RsvdP bits in ERSTBA register correctly
xhci: Clear EHB bit only at end of interrupt handler
xhci: track port suspend state correctly in unsuccessful resume cases
usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer
usb: typec: ucsi: Clear EVENT_PENDING bit if ucsi_send_command fails
usb: misc: onboard_hub: add support for Microchip USB2412 USB 2.0 hub
usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
usb: cdns3: Modify the return value of cdns_set_active () to void when CONFIG_PM_SLEEP is disabled
usb: dwc3: Soft reset phy on probe for host
usb: hub: Guard against accesses to uninitialized BOS descriptors
usb: typec: qcom: Update the logic of regulator enable and disable
usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call
usb: musb: Get the musb_qh poniter after musb_giveback
usb: musb: Modify the "HWVers" register address
usb: cdnsp: Fixes issue with dequeuing not queued requests
thunderbolt: Restart XDomain discovery handshake after failure
thunderbolt: Correct TMU mode initialization from hardware
...
Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
some reported issues. Included in here are:
- serial core pm runtime fix for issue reported by many
- 8250_omap driver fix
- rs485 spinlock fix for reported problem
- ams-delta bugfix for previous tty api changes in -rc1 that missed
this driver that never seems to get built in any test systems
All of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZSwD9w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylEJgCeKeWhXY68gkV3Y2WjOuk9rA4kfO4An3YhzuyX
YQS5m+bhibXE5u6KiXV5
=LD0t
-----END PGP SIGNATURE-----
Merge tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
some reported issues. Included in here are:
- serial core pm runtime fix for issue reported by many
- 8250_omap driver fix
- rs485 spinlock fix for reported problem
- ams-delta bugfix for previous tty api changes in -rc1 that missed
this driver that never seems to get built in any test systems
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
ASoC: ti: ams-delta: Fix cx81801_receive() argument types
serial: core: Fix checks for tx runtime PM state
serial: 8250_omap: Fix errors with no_console_suspend
serial: Reduce spinlocked portion of uart_rs485_config()
Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- embargoed hardware issue documentation update
All of these have been in linux-next for over a week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZSwDDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym+dACeMHpZCh9sxF78uhfIrth6et899uYAoNBoiAOA
pTDip38HytOnQ/FpTEzh
=AuVV
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- documentation update for embargoed hardware issues
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
binder: fix memory leaks of spam and pending work
firmware_loader: Update contact emails for ABI docs
Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
mcb: remove is_added flag from mcb_device struct
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
...
-----BEGIN PGP SIGNATURE-----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=9LTH
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Amir Goldstein:
- Various fixes for regressions due to conversion to new mount
api in v6.5
- Disable a new mount option syntax (append lowerdir) that was
added in v6.5 because we plan to add a different lowerdir
append syntax in v6.7
* tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: temporarily disable appending lowedirs
ovl: fix regression in showing lowerdir mount option
ovl: fix regression in parsing of mount options with escaped comma
fs: factor out vfs_parse_monolithic_sep() helper
- Fix softlockup/crash when using hcall tracing.
- Fix pte_access_permitted() for PAGE_NONE on 8xx.
- Fix inverted pte_young() test in __ptep_test_and_clear_young() on 64-bit BookE.
- Fix unhandled math emulation exception on 85xx.
- Fix kernel crash on syscall return on 476.
Thanks to: Athira Rajeev, Christophe Leroy, Eddie James, Naveen N Rao.
-----BEGIN PGP SIGNATURE-----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=uMis
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix softlockup/crash when using hcall tracing
- Fix pte_access_permitted() for PAGE_NONE on 8xx
- Fix inverted pte_young() test in __ptep_test_and_clear_young()
on 64-bit BookE
- Fix unhandled math emulation exception on 85xx
- Fix kernel crash on syscall return on 476
Thanks to Athira Rajeev, Christophe Leroy, Eddie James, and Naveen N
Rao.
* tag 'powerpc-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/47x: Fix 47x syscall return crash
powerpc/85xx: Fix math emulation exception
powerpc/64e: Fix wrong test in __ptep_test_and_clear_young()
powerpc/8xx: Fix pte_access_permitted() for PAGE_NONE
powerpc/pseries: Remove unused r0 in the hcall tracing code
powerpc/pseries: Fix STK_PARAM access in the hcall tracing code
prototypes between architectures.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=20Na
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
"Fix a Longsoon build warning by harmonizing the
arch_[un]register_cpu() prototypes between architectures"
* tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu-hotplug: Provide prototypes for arch CPU registration
-----BEGIN PGP SIGNATURE-----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=X4B/
-----END PGP SIGNATURE-----
Merge tag '6.6-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix for possible double free in RPC read
- Add additional check to clarify smb2_open path and quiet Coverity
- Fix incorrect error rsp in a compounding path
- Fix to properly fail open of file with pending delete on close
* tag '6.6-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix potential double free on smb2_read_pipe() error path
ksmbd: fix Null pointer dereferences in ksmbd_update_fstate()
ksmbd: fix wrong error response status by using set_smb2_rsp_status()
ksmbd: not allow to open file if delelete on close bit is set
-----BEGIN PGP SIGNATURE-----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=ZlF9
-----END PGP SIGNATURE-----
Merge tag '6.6-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix caching race with open_cached_dir and laundromat cleanup of
cached dirs (addresses a problem spotted with xfstest run with
directory leases enabled)
- reduce excessive resource usage of laundromat threads
* tag '6.6-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: prevent new fids from being removed by laundromat
smb: client: make laundromat a delayed worker
Thomas Richard
David Woodhouse
Crescent CY Hsieh
Francesco Dolcini
André Draszik
Florian Eckert
Max Filippov
Krzysztof Kozlowski
Arnd Bergmann
Tony Lindgren
Pavel Krasavin
Julien Malik
Hugo Villeneuve
Greg Kroah-Hartman
Linus Torvalds
Xuan Zhuo