Eliminate this warning:
warning: return discards qualifiers from pointer target type
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
I have no clue what the original intent here was, but the code as
written is useless.
The old dbg() statement above the old callsite might lead one to think
that at one point, there was supposed to be some recursion, but any
sense of sanity here has been lost to the ravages of time.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Instead of making multiple calls to pcibios_get_irq_routing_table, let's
just do it once and save the answer.
The reason we were making multiple calls is because we liked to calculate
its length and perform some loop over it. Instead of open-coding the length
calculation every time, provide it in an inline helper function.
Finally, since pci_print_IRQ_route() is used only for debug, let's only
do it when cpqhp_debug is set.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Handle an empty slot at the top of the loop, and continue early.
This allows us to un-indent the rest of the function by one level.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Check for an empty slot, and return early if so.
This allows us to un-indent the rest of the function by one level.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Apply DeMorgan's theorem:
if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL))
turns into
if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL))
Now we can bail out early from the function if the controller is not
supported.
This allows us to un-indent the remainder of the function quite a bit and
make it much more readable.
Fix up some extra braces, and un-indent the 'case' labels in the switch
statement as per CodingStyle.
No functional change.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Clean up style and eliminate superfluous braces and parens.
No functional change.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Impact: refactor
Refactor code to follow convention more closely and eliminate the need
for some useless prototypes.
No functional change.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Fix up comments from C++ to C-style, wrapping if necessary, etc.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Clean up all stray whitespace issues, such as trailing whitespace,
spaces before tabs, etc. and whatever else vim's c_space_errors
highlights in red.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We could run out of space under under 4g, but devices under transparent
bridges can use 64bit resources, so keep trying on the parent bus until
we hit a non-transparent bridge.
Impact: better support for assigning unassigned resources
Reviewed-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We should not assign 64bit ranges to PCI devices that only take 32bit
prefetchable addresses.
Try to set IORESOURCE_MEM_64 in 64bit resource of pci_device/pci_bridge
and make the bus resource only have that bit set when all devices under
it support 64bit prefetchable memory. Use that flag to allocate
resources from that range.
Reported-by: Yannick <yannick.roehlly@free.fr>
Reviewed-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device. Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used. These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Impact: cleanup, spec compliance
This patch does:
- Remove unused msi/msix_enable/disable macros.
User should use msi/msix_set_enable() functions instead.
- Remove unused msix_mask/unmask/pending macros.
These macros are useless because they are not based on any of
the PCI Local Bus Specifications properly.
It seems that they were written based on a draft of PCI spec,
and that the draft was the MSI-X ECN that underwent membership
review in September 2002.
(* In the draft, the size of a entry in MSI-X table was 64bit,
containing 32bit message data and DWORD aligned lower address
plus a pending bit and a mask bit.(30+1+1bit) The higher
address was placed in MSI-X capability structure and shared
by all entries.)
- Remove PCI_MSIX_FLAGS_BITMASK.
This definition also come from the draft ECN.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Add a generic (unoptimized) implementation of checksum.c in pure C
for use by all architectures that cannot be bother with implementing
their own version.
Based on microblaze code by Michal Simek <monstr@monstr.eu>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Based on discussions with Michal Simek and code
from m68knommu and h8300, this version of uaccess.h
should be usable by most architectures, by overriding
some parts of it.
Simple NOMMU architectures can use it out of
the box, but a minimal __access_ok() should be
added there as well.
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Memory management in generic is highly architecture specific,
but on NOMMU architectures, it is mostly trivial, so just
add a default implementation in asm-generic that applies
to all NOMMU architectures.
The two files cache.h and cacheflush.h can possibly also
be used by architectures that have an MMU but never require
flushing the cache or have cache lines larger than 32 bytes.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
atomic.h and io.h are based on the mn10300 architecture,
which is already pretty generic and can be used by
other architectures that do not have hardware support
for atomic operations or out-of-order I/O access.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The dma.h, hw_irq.h, serial.h and timex.h files originally
described PC-style i8237, i8259A, i8250, i8253 and i8255 chips
as well as the VGA style text mode graphics.
Modern architectures live happily without these specific
interfaces, but a few definitions from these headers keep
getting used in common code.
The new generic headers are what most architectures use
anyway nowadays, just implementing the minimal definitions.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These are all kernel internal interfaces that get copied
around a lot. In most cases, architectures can provide
their own optimized versions, but these generic versions
can work as well.
I have tried to use the most common contents of each
header to allow existing architectures to migrate easily.
Thanks to Remis for suggesting a number of cleanups.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
bitops.h apparently suffered from some level of bitrot, it
was missing the smp_mb__{before,after}_clear_bit functions,
and included other headers in an invalid order.
This changes the file so that new architectures can use
it out of the box.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some generic code is using the horribly misnamed PCI_DMA_BUS_IS_PHYS
from asm/pci.h. This makes sure that an architecture without PCI
support does not have to define this itself but can rely on the
asm-generic version.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Evidently, set_rtc_time is supposed to be overridable
by architectures that define their own version, but
unfortunately, get_rtc_ss would in that case still
use the generic version.
This makes get_rtc_ss call the real set_rtc_time
to let architectures define their own version.
The change should fix the "Extended RTC operation"
on Alpha, which uses the incorrect get_rtc_ss
call. It also allows PowerPC to use the asm-generic/rtc.h
file in the future.
Cc: Richard Henderson <rth@twiddle.net>
Cc: linux-alpha@vger.kernel.org
Cc: Tom Rini <trini@mvista.com>
Cc: rtc-linux@googlegroups.com
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The current asm-generic/page.h only contains the get_order
function, and asm-generic/uaccess.h only implements
unaligned accesses. This renames the file to getorder.h
and uaccess-unaligned.h to make room for new page.h
and uaccess.h file that will be usable by all simple
(e.g. nommu) architectures.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The existing asm-generic/atomic.h only defines the
atomic_long type. This renames it to atomic-long.h
so we have a place to add a truly generic atomic.h
that can be used on all non-SMP systems.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
A new architecture should only define a minimal set of system
calls while still providing the full functionality. This version
of unistd.h has gone through intensive review to make sure that
by default it only enables syscalls that do not already have
a more featureful replacement.
It is modeled after the x86-64 version of unistd.h, which unifies
the syscall number definition and the actual system call table
in a single file, in order to keep them synchronized much more
easily.
This first version still keeps legacy system call definitions
around, guarded by various #ifdefs, and with numbers larger
than 1024. The idea behind this is to make it easier for
new architectures to transition from a full list to the reduced
set. In particular, the new microblaze architecture that should
migrate to using the generic ABI headers can at least use an
existing uClibc source tree without major rewrites during the
conversion.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These header files are typically copied from an existing architecture
into any new one, slightly modified and then remain untouched until
the end of time in the name of ABI stability.
To make it easier for future architectures, provide a sane generic
version here. In cases where multiple architectures already use
identical code, I used the most common version. In cases like
stat.h that are more or less broken everywhere, I provide a
version that is meant to be ideal for new architectures.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ipc64 data structures were originally meant to
be architecture specific so that each architecture
could add their own optimizations for padding.
In the end, most of them just copied the x86 version,
and most got that wrong. UClibc expects the x86 anyway,
so we might just declare that the default and get
rid of the extra copies.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This provides a reliable way for asm-generic/types.h and other
files to find out if it is running on a 32 or 64 bit platform.
We cannot use CONFIG_64BIT for this in headers that are included
from user space because CONFIG symbols are not available there.
We also cannot do it inside of asm/types.h because some headers
need the word size but cannot include types.h.
The solution is to introduce a new header <asm/bitsperlong.h>
that defines both __BITS_PER_LONG for user space and
BITS_PER_LONG for usage in the kernel. The asm-generic
version falls back to 32 bit unless the architecture overrides
it, which I did for all 64 bit platforms.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The existing asm-generic versions are incomplete and included
by some architectures. New architectures should be able
to use a generic version, so rename the existing files and
change all users, which lets us add the new files.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most fsnotify listeners (all but inotify) do not care about marks being
freed. Allow groups to set freeing_mark to null and do not call any
function if it is set that way.
Signed-off-by: Eric Paris <eparis@redhat.com>
inotify and dnotify will both indicate that they want any event which came
from a child inode. The fix is to mask off FS_EVENT_ON_CHILD when deciding
if inotify or dnotify is interested in a given event.
Signed-off-by: Eric Paris <eparis@redhat.com>
entry->lock is needed to make sure entry->mask does not change while
manipulating it. In dnotify_should_send_event() we don't care if we get an
old or a new mask value out of this entry so there is no point it taking
the lock.
Signed-off-by: Eric Paris <eparis@redhat.com>
dnotify_should send event assigned a bool using ?true:false when computing
a bit operation. This is poitless and the bool type does this for us.
Signed-off-by: Eric Paris <eparis@redhat.com>
fsnotify tells its listeners explicitly when an event happened on the given
inode verses on the child of the given inode. (see __fsnotify_parent)
However, the semantics of fsnotify_move() are such that we deliver events
directly to the two parent directories in question (old_dir and new_dir)
directly without using the __fsnotify_parent() call. fsnotify should be
adding FS_EVENT_ON_CHILD for the notifications to these parents.
Signed-off-by: Eric Paris <eparis@redhat.com>
Reimplement inotify_user using fsnotify. This should be feature for feature
exactly the same as the original inotify_user. This does not make any changes
to the in kernel inotify feature used by audit. Those patches (and the eventual
removal of in kernel inotify) will come after the new inotify_user proves to be
working correctly.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
When an fs is unmounted with an fsnotify mark entry attached to one of its
inodes we need to destroy that mark entry and we also (like inotify) send
an unmount event.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
This patch pins any inodes with an fsnotify mark in core. The idea is that
as soon as the mark is removed from the inode->fsnotify_mark_entries list
the inode will be iput. In reality is doesn't quite work exactly this way.
The igrab will happen when the mark is added to an inode, but the iput will
happen when the inode pointer is NULL'd inside the mark.
It's possible that 2 racing things will try to remove the mark from
different directions. One may try to remove the mark because of an
explicit request and one might try to remove it because the inode was
deleted. It's possible that the removal because of inode deletion will
remove the mark from the inode's list, but the removal by explicit request
will actually set entry->inode == NULL; and call the iput. This is safe.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
inotify needs per group information attached to events. This patch allows
groups to attach private information and implements a callback so that
information can be freed when an event is being destroyed.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
As part of the standard inotify events it includes a correlation cookie
between two dentry move operations. This patch includes the same behaviour
in fsnotify events. It is needed so that inotify userspace can be
implemented on top of fsnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
When inotify wants to send events to a directory about a child it includes
the name of the original file. This patch collects that filename and makes
it available for notification.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
inotify needs to do asyc notification in which event information is stored
on a queue until the listener is ready to receive it. This patch
implements a generic notification queue for inotify (and later fanotify) to
store events to be sent at a later time.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
inotify and dnotify both use a similar parent notification mechanism. We
add a generic parent notification mechanism to fsnotify for both of these
to use. This new machanism also adds the dentry flag optimization which
exists for inotify to dnotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
This patch creates a way for fsnotify groups to attach marks to inodes.
These marks have little meaning to the generic fsnotify infrastructure
and thus their meaning should be interpreted by the group that attached
them to the inode's list.
dnotify and inotify will make use of these markings to indicate which
inodes are of interest to their respective groups. But this implementation
has the useful property that in the future other listeners could actually
use the marks for the exact opposite reason, aka to indicate which inodes
it had NO interest in.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
