Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/all/20230323113318.9473-3-cai.huoqing@linux.dev
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/all/20230323113318.9473-2-cai.huoqing@linux.dev
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/all/20230323113318.9473-1-cai.huoqing@linux.dev
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When the PHY library calls phy_error() something bad has happened, and
we halt the PHY state machine. Calling phy_error() from the main state
machine however is not precise enough to know whether the issue is
reading the link status or starting auto-negotiation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the PTP programmable gpios to implement also PTP_PF_EXTTS
function. The pins can be configured to capture both of rising
and falling edge. Once the event is seen, then an interrupt is
generated and the LTC is saved in the registers.
This was tested using:
ts2phc -m -l 7 -s generic -f ts2phc.cfg
Where the configuration was the following:
[global]
ts2phc.pin_index 6
[eth2]
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Acked-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_command);
}
pcibios_disable_device(dev);
}.
And dev->is_busmaster is set to 0 in pci_disable_device.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit b984d7b56d ("MIPS: sibyte: Remove unused config option
SIBYTE_BCM1x55"), some #if's in the Broadcom SiByte SOC built-in Ethernet
driver can be simplified.
Simplify prepreprocessor conditions after config SIBYTE_BCM1x55 removal.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The issue fixed for bonding in commit c2edacf80e ("bonding / ipv6: no
addrconf for slaves separately from master") also exists in team driver.
However, we can't just disable ipv6 addrconf for team ports, as 'teamd'
will need it when nsns_ping watch is used in the user space.
Instead of preventing ipv6 addrconf, this patch only prevents RS packets
for team ports, as it did in commit b52e1cce31 ("ipv6: Don't send rs
packets to the interface of ARPHRD_TUNNEL").
Note that we do not prevent DAD packets, to avoid the changes getting
intricate / hacky. Also, usually sysctl dad_transmits is set to 1 and
only 1 DAD packet will be sent, and by now no libteam user complains
about DAD packets on team ports, unlike RS packets.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal says:
====================
netfilter updates for net-next
This pull request contains changes for the *net-next* tree.
1. Change IPv6 stack to keep conntrack references until ipsec policy
checks are done, like ipv4, from Madhu Koriginja.
This update was missed when IPv6 NAT support was added 10 years ago.
2. get rid of old 'compat' structure layout in nf_nat_redirect
core and move the conversion to the only user that needs the
old layout for abi reasons. From Jeremy Sowden.
3. Compact some common code paths in nft_redir, also from Jeremy.
4. Time to remove the 'default y' knob so iptables 32bit compat interface
isn't compiled in by default anymore, from myself.
5. Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
Also from myself.
* 'main' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: keep conntrack reference until IPsecv6 policy checks are done
xtables: move icmp/icmpv6 logic to xt_tcpudp
netfilter: xtables: disable 32bit compat interface by default
netfilter: nft_masq: deduplicate eval call-backs
netfilter: nft_redir: use `struct nf_nat_range2` throughout and deduplicate eval call-backs
====================
Link: https://lore.kernel.org/r/20230322210802.6743-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One of the most commonly asked questions is "I answered all questions
and don't need to make any code changes, why was the patch not applied".
Document our time honored tradition of asking people to repost with
improved commit messages, to record the answers to reviewer questions.
Take this opportunity to also recommend a change log format.
Link: https://lore.kernel.org/r/20230322231202.265835-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The load_cpu_fw function has no error return code
and always returns zero. Checking the value returned by
this function does not make sense.
Now checking the value of the return value is misleading when reading
the code. Path with error handling was deleted in 57579f7629
("bnx2: Use request_firmware()").
As a result, bnx2_init_cpus() will also return only zero
Therefore, it will be safe to change the type of functions
to void and remove checking to improving readability.
Found by Security Code and Linux Verification
Center (linuxtesting.org) with SVACE
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Link: https://lore.kernel.org/r/20230322162843.3452-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Playing with dpll netlink, I came across following issue:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-set --json '{"id": 0, "pin-idx": 1, "pin-state": 1}'
Traceback (most recent call last):
File "tools/net/ynl/cli.py", line 52, in <module>
main()
File "tools/net/ynl/cli.py", line 40, in main
reply = ynl.do(args.do, attrs)
File "tools/net/ynl/lib/ynl.py", line 520, in do
return self._op(method, vals)
File "tools/net/ynl/lib/ynl.py", line 476, in _op
msg += self._add_attr(op.attr_set.name, name, value)
File "tools/net/ynl/lib/ynl.py", line 344, in _add_attr
raise Exception(f'Unknown type at {space} {name} {value} {attr["type"]}')
Exception: Unknown type at dpll pin-state 1 u8
I'm not that familiar with ynl code, but from a quick peek, I suspect
that couple other types are missing for both encoding and decoding.
Ignoring those here as I'm scratching my local itch only.
Fix the issue by adding u8 attr packing.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230322154242.1739136-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
4 places in the act api code are using 'TCA_' definitions where they
should be using 'TCA_ACT_', which is confusing for the reader, although
functionally they are equivalent.
Cc: Hangbin Liu <haliu@redhat.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-03-21 (igb, igbvf, igc)
This series contains updates to igb, igbvf, and igc drivers.
Andrii changes igb driver to utilize diff_by_scaled_ppm() implementation
over an open-coded version.
Dawid adds pci_error_handlers for reset_prepare and reset_done for
igbvf.
Sasha removes unnecessary code in igc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata says:
====================
net: Allow changing IPv4 address protocol
IPv4 and IPv6 addresses can be assigned a protocol value that indicates the
provenance of the IP address. The attribute is modeled after ip route
protocols, and essentially allows the administrator or userspace stack to
tag addresses in some way that makes sense to the actor in question.
When IP address protocol field was added in commit 47f0bd5032 ("net: Add
new protocol attribute to IP addresses"), the semantics included the
ability to change the protocol for IPv6 addresses, but not for IPv4
addresses. It seems this was not deliberate, but rather by accident.
One particular use case is tagging the addresses differently depending on
whether the routing stack should advertise them or not. Without support for
protocol replacement, this can not be done.
In this patchset, extend IPv4 to allow changing the protocol defined at an
address (in patch #1). Then in patches #2 and #3 add selftest coverage for
ip address protocols.
Currently the kernel simply ignores the new value. Thus allowing the
replacement changes the observable behavior. However, since IPv6 already
behaves like this anyway, and since the feature as such is relatively new,
it seems like the change is safe to make.
An example session with the feature in action:
bash-5.2# ip address add dev d 192.0.2.1/28 proto 0xab
bash-5.2# ip address show dev d
4: d: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 06:29:74:fd:1f:eb brd ff:ff:ff:ff:ff:ff
inet 192.0.2.1/28 scope global proto 0xab d
valid_lft forever preferred_lft forever
bash-5.2# ip address replace dev d 192.0.2.1/28 proto 0x11
bash-5.2# ip address show dev d
4: d: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 06:29:74:fd:1f:eb brd ff:ff:ff:ff:ff:ff
inet 192.0.2.1/28 scope global proto 0x11 d
valid_lft forever preferred_lft forever
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the list of all tests into a variable, ALL_TESTS. Then assume the
environment variable TESTS holds the list of tests to actually run, falling
back to ALL_TESTS if TESTS is empty. This is the same interface that
forwarding selftests use to make the set of tests to run configurable.
In addition to this, allow setting the value explicitly through a command
line option "-t" along the lines of what fib_nexthops.sh does.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When IP address protocol field was added in commit 47f0bd5032 ("net: Add
new protocol attribute to IP addresses"), the semantics included the
ability to change the protocol for IPv6 addresses, but not for IPv4
addresses. It seems this was not deliberate, but rather by accident.
A userspace that wants to change the protocol of an address might drop and
recreate the address, but that disrupts routing and is just impractical.
So in this patch, when an IPv4 address is replaced (through RTM_NEWADDR
request with NLM_F_REPLACE flag), update the proto at the address to the
one given in the request, or zero if none is given. This matches the
behavior of IPv6. Previously, any new value given was simply ignored.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: fully support IPA v5.0
At long last, add the IPA and GSI register definitions, and the
configuration data required to support IPA v5.0. This enables IPA
support for the Qualcomm SDX65 SoC.
The first version of this series had build errors due to a
non-existent source file being required. This version addresses
that by changing how required files are specified in the Makefile.
Note that the second patch has some warnings about lines starting
with spaces; those spaces align text with the open parenthesis on
the previous line.
====================
Link: https://lore.kernel.org/r/20230321182644.2143990-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the configuration data required for IPA v5.0, which is used in
the SDX65 SoC.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the definitions of GSI register offsets and fields for IPA v5.0.
These are used for the SDX65 SoC. Increase the maximum channel and
event ring counts supported by the driver, so those implemented by
the SDX65 are supported.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the definitions of IPA register offsets and fields for IPA v5.0.
These are used for the SDX65 SoC.
In the Makefile, split IPA_VERSIONS to use IPA_REG_VERSIONS and
IPA_DATA_VERSIONS instead, to allow IPA register definitions for a
new version to be added separate from the IPA data.
Rename GSI_IPA_VERSIONS to be GSI_REG_VERSIONS for consistency.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a quirk for a copper SFP that identifies itself as "OEM"
"SFP-2.5G-T". This module's PHY is inaccessible, and can only run
at 2500base-X with the host without negotiation. Add a quirk to
enable the 2500base-X interface mode with 2500base-T support, and
disable autonegotiation.
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow SFP quirks to override the Autoneg, Pause and Asym_Pause bits in
the support mask.
Some modules have an inaccessible PHY on which is only accessible via
2500base-X without Autonegotiation. We therefore want to be able to
clear the Autoneg bit. Rearrange sfp_parse_support() to allow a SFP
modes quirk to override this bit.
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: remove some skb_mac_header assumptions
Historically, we tried o maintain skb_mac_header available in most of
networking paths.
When reaching ndo_start_xmit() handlers, skb_mac_header() should always
be skb->data.
With recent additions of skb_mac_header_was_set() and
DEBUG_NET_WARN_ON_ONCE() in skb_mac_header(), we can attempt
to remove our reliance on skb_mac_header in TX paths.
When this effort completes we will remove skb_reset_mac_header()
from __dev_queue_xmit() and replace it by
skb_unset_mac_header() on DEBUG_NET builds.
====================
Link: https://lore.kernel.org/r/20230321164519.1286357-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_mirred_act() and tcf_mpls_act() can use skb_network_offset()
instead of relying on skb_mac_header().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to remove our use of skb_mac_header() in tx paths,
eg remove skb_reset_mac_header() from __dev_queue_xmit().
Idea is that ndo_start_xmit() can get the mac header
simply looking at skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to remove our use of skb_mac_header() in tx paths,
eg remove skb_reset_mac_header() from __dev_queue_xmit().
Idea is that ndo_start_xmit() can get the mac header
simply looking at skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
Remove phylink_state's an_enabled member
Now that all the fixes and correctness patches have been merged, it is
time to switch the two users that make use of .an_enabled to check the
Autoneg bit in the advertising mask, and finally remove the
.an_enabled member.
The first two patches remove the last uses of .an_enabled, which are
in DPAA2 and XPCS. The final patch removes the member.
====================
Link: https://lore.kernel.org/r/ZBnT6yW9UY1sAsiy@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
