[Why && How]
Add support to read manufacturer OUI
and device id from HDMI SCDC.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DRR and Pipe cannot be updated on
the same frame, or else underflow will
occur.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.
[HOW]
Defer all DPP adjustment requests till optimized_required is false.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, it is likely that we will read the relevant LTTPR caps after
link training has completed (which can cause garbage data to be read),
however according to the DP 2.0 spec that should be done before link
training has commenced. So, instead of reading the registers on demand,
use the values provided to us by DC.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 9aa1537081.
This is fixed now so we can re-enable S/G display on DCN
3.1.4.
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1a65327a84.
This should be resolved so we can re-enable this. Also,
the AGP apeture was bring programmed to 0 on MMHUB 3.0.1
since agp_start and end were not being set.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Take into account whether or not the AGP aperture is
enabled or not when calculating the system aperture.
Fixes white screens with DCN 3.1.4.
Based on a patch from Yifan Zhang <yifan1.zhang@amd.com>
Cc: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Accessing GRBM_GFX_CNTL in full access time has risk when VF is doing MMIO attacking.
Therefore, VF writing GRBM_GFX_CNTL are blocked by L1 Policy.
For RLCG interface, RLCG use SCRATCH_REG2 which is copied from GRBM_GFX_CNTL.
[How]
Remove writing GRBM_GFX_CNTL in amdgpu_virt_rlcg_reg_rw.
v2:
Remove directly writing GRBM_GFX_INDEX in amdgpu_virt_rlcg_reg_rw
as RLCG interface no need to use it.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We allow sending PSP messages LOAD_ASD and UNLOAD_TA without
acquiring a lock in drm_dev_enter during driver unload
because we must call drm_dev_unplug as the beginning
of unload driver sequence.
Added WARNING if other PSP messages are sent without a lock.
After this commit, the following commands would work
-sudo modprobe -r amdgpu
-sudo modprobe amdgpu
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a very trivial code clean-up related to commit 5468c36d62
("drm/amd/display: Filter Invalid 420 Modes for HDMI TMDS"). This commit
added a validation on driver probe to prevent invalid TMDS modes, but one
of the fake properties (swizzle) ended-up causing a warning on driver
probe; was reported here: https://gitlab.freedesktop.org/drm/amd/-/issues/2264.
It was fixed by commit a1cbe6916f ("drm/amd/display: patch cases with
unknown plane state to prevent warning"), but the validation code had
a double variable assignment, which we hereby remove. Also, the fix relies
in the dcn2{0,1}patch_unknown_plane_state() callbacks, so while at it we
took the opportunity to perform a small code clean-up in such routines.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Mark Broadworth <mark.broadworth@amd.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Sung Joon Kim <Sungjoon.Kim@amd.com>
Cc: Swapnil Patel <Swapnil.Patel@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cppcheck reports
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: style:
Expression is always true because 'else if' condition is opposite to previous condition at line 1396. [multiCondition]
} else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) {
^
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1396:69: note: first condition
if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type != SUBVP_PHANTOM) {
^
drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: note: else if condition is opposite to first condition
} else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) {
It is not necessary to explicitly the check != condition, an else is simplier.
Fixes: 238debcaeb ("drm/amd/display: Use DML for MALL SS and Subvp allocation calculations")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
checkpatch reports
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: style:
Expression is always true because 'else if' condition is opposite to previous condition at line 2895. [multiCondition]
} else if (blank) {
^
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2895:6: note: first condition
if (!blank) {
^
drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: note: else if condition is opposite to first condition
} else if (blank) {
It is not necessary to explicitly the check != condition, an else is simplier.
Fixes: aa5a577730 ("drm/amd/display: Vari-bright looks disabled near end of MM14")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There could be boards with DCN listed in IP discovery, but no
display hardware actually wired up. In this case the vbios
display table will not be populated. Detect this case and
skip loading DM when we detect it.
v2: Mark DCN as harvested as well so other display checks
elsewhere in the driver are handled properly.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These sysfs nodes are tested supported, so enable them.
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A mistake has been made on some boards with NBIO 4.3.0 where some
NBIO registers aren't properly set by the hardware.
Ensure that they're set during initialization.
Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com>
Tested-by: Satyanarayana ReddyTVN <Satyanarayana.ReddyTVN@amd.com>
Tested-by: Rutvij Gajjar <Rutvij.Gajjar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable HDP clock gating control for gfx 11.0.3.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW will handle the features disablement properly for gpu reset case,
driver involvement may cause some unexpected issues.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- fix linux dp link lost handled only one time
- Reset DMUB mailbox SW state after HW reset
- Unassign does_plane_fit_in_mall function from dcn3.2
- Add Function delaration in dc_link
- Fix crash when connecting 2 displays with video playback
- Adjust downscaling limits for dcn314
- fix FCLK pstate change underflow
- Fix only one ABM pipe enabled under ODM combined case
- Add missing brackets in calculation
- Correct bw_params population
- Fix Z8 support configurations
- Add Debug Log for MST and PCON
- fix MALL size hardcoded for DCN321
- add rc_params_override option in dc_dsc_config
- Enable Freesync over PCon
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
linux amdgpu defer handle link lost irq. dm add handle
request to irq work queue for the first irq of link lost.
if link training fails for link lost handle, link will not
be enabled anymore.
[How]
allow adding handle request of link lost to work queue
before running dp link training for link lost.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Otherwise we can be out of sync with what's in the hardware, leading
to us rerunning every command that's presently in the ringbuffer.
[How]
Reset software state for the mailboxes in hw_reset callback.
This is already done as part of the mailbox init in hw_init, but we
do need to remember to reset the last cached wptr value as well here.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The hwss function does_plane_fit_in_mall not applicable to dcn3.2 asics.
Using it with dcn3.2 can result in undefined behaviour.
[How]
Assign the function pointer to NULL.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Housekeeping cleaning and adding declaration for
function to be called from DM layer
[HOW]
Adding public functions to dc_link.h
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 7cf5ceb30d.
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Lower max_downscale_ratio and ARGB888 downscale factor
to prevent cases where underflow may occur on dcn314
[How]
Set max_downscale_ratio to 400 and ARGB downscale factor
to 250 for dcn314
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently we set FCLK p-state change
watermark calculated based on dummy
p-state latency when UCLK p-state is
not supported
[How]
Calculate FCLK p-state change watermark
based on on FCLK pstate change latency
in case UCLK p-state is not supported
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ABM set pipe before updating ODM status,
it leads to incorrect ABM pipe setting when enabling ODM combine.
[How]
Call ABM set pipe flow after ODM status update in program pipe sequence.
Reviewed-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Brackets missing in the calculation for MIN_DST_Y_NEXT_START
[How]
Add missing brackets for this calculation
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow observed during P010 video playback on
dcn314 due to incorrectly populated bw_params
[How]
Populate fclk, memclk and voltage in bw_params with
values from max pstate rather than min pstate
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's not supported in multi-display, but it is supported in 2nd eDP
screen only.
[How]
Remove multi display support, restrict number of planes for all
z-states support, but still allow Z8 if we're not using PWRSEQ0.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add log for MST/PCON specific use case:
1. If DP1.2 hub where gives reduced link bw and no dsc support.
2. If less than 4-lane configuration where gives reduced bw.
3. If FRL PCON enabled for asic.
4. Track MST sink count.
Reviewed-by: Hersen Wu <Hersenxs.Wu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MALL size available can vary for different SKUs
MALL size was still hardcoded for DCN321
[How]
Remove hardcoding MALL size for DCN321
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Current RC params are based on VESA recommended configurations.
Some DSC sink may prefer non standard rc params values due to
hardware limitations. To support those DSC sink we will allow DM to
optionally pass rc_params_ovrd in dc_dsc_config so DC will override
the default VESA recommended configurations.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Enable Freesync over PCon on Linux environment.
[how]
Adding Freesync over PCon support in amdgpu_dm
- Read DPCD for Freesync over PCon capabilitiy
- Add whitelist for compatible branch devices
Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SQ_WAVE_INST_DW0 isn't present on gfx11 compared to gfx10, so update
wave data type to signify a difference.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We guard the suspend entry code from running unless we have proper
BIOS support for either S3 mode or s0ix mode.
If a user's system doesn't support either of these modes the kernel
still does offer s2idle in `/sys/power/mem_sleep` so there is an
expectation from users that it works even if the power consumption
remains very high.
Rafael Ávila de Espíndola reports that a system of his has a
non-functional graphics stack after resuming. That system doesn't
support S3 and the FADT doesn't indicate support for low power idle.
Through some experimentation it was concluded that even without the
hardware s0i3 support provided by the amd_pmc driver the power
consumption over suspend is decreased by running amdgpu's s0ix
suspend routine.
The numbers over suspend showed:
* No patch: 9.2W
* Skip amdgpu suspend entirely: 10.5W
* Run amdgpu s0ix routine: 7.7W
As this does improve the power, remove some of the guard rails in
`amdgpu_acpi.c` for only running s0ix suspend routines in the right
circumstances.
However if this turns out to cause regressions for anyone, we should
revert this change and instead opt for skipping suspend/resume routines
entirely or try to fix the underlying behavior that makes graphics fail
after resume without underlying platform support.
Reported-by: Rafael Ávila de Espíndola <rafael@espindo.la>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2364
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit fac53471d0.
The following change: move the drm_dev_unplug call after
amdgpu_driver_unload_kms in amdgpu_pci_remove. The reason is
the following: amdgpu_pci_remove calls drm_dev_unregister
and it should be called first to ensure userspace can't access the
device instance anymore. If we call drm_dev_unplug after
amdgpu_driver_unload_kms then we observe IGT PCI software unplug
test failure (kernel hung) for all ASICs. This is how this
regression was found.
After this revert, the following commands do work not, but it would
be fixed in the next commit:
- sudo modprobe -r amdgpu
- sudo modprobe amdgpu
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmPW7E8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGf7MIAI0JnHN9WvtEukSZ
E6j6+cEGWxsvD6q0g3GPolaKOCw7hlv0pWcFJFcUAt0jebspMdxV2oUGJ8RYW7Lg
nCcHvEVswGKLAQtQSWw52qotW6fUfMPsNYYB5l31sm1sKH4Cgss0W7l2HxO/1LvG
TSeNHX53vNAZ8pVnFYEWCSXC9bzrmU/VALF2EV00cdICmfvjlgkELGXoLKJJWzUp
s63fBHYGGURSgwIWOKStoO6HNo0j/F/wcSMx8leY8qDUtVKHj4v24EvSgxUSDBER
ch3LiSQ6qf4sw/z7pqruKFthKOrlNmcc0phjiES0xwwGiNhLv0z3rAhc4OM2cgYh
SDc/Y/c=
=zpaD
-----END PGP SIGNATURE-----
Merge v6.2-rc6 into drm-next
Due to holidays we started -next with more -fixes in-flight than
usual, and people have been asking where they are. Backmerge to get
things better in sync.
Conflicts:
- Tiny conflict in drm_fbdev_generic.c between variable rename and
missing error handling that got added.
- Conflict in drm_fb_helper.c between the added call to vgaswitcheroo
in drm_fb_helper_single_fb_probe and a refactor patch that extracted
lots of helpers and incidentally removed the dev local variable.
Readd it to make things compile.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This set of changes includes a rework of the custom syncpoint interrupt
code to take better advantage of existing DRM/KMS infrastructure.
There's also various bits of cleanup and fixes included.
-----BEGIN PGP SIGNATURE-----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=PcBB
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-6.3-rc1' of https://gitlab.freedesktop.org/drm/tegra into drm-next
drm/tegra: Changes for v6.3-rc1
This set of changes includes a rework of the custom syncpoint interrupt
code to take better advantage of existing DRM/KMS infrastructure.
There's also various bits of cleanup and fixes included.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127170119.495943-1-thierry.reding@gmail.com
drm/i915 feature pull #2 v6.3:
Features and functionality:
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid (Jani)
- Start using unversioned DMC firmware paths for new platforms (Gustavo)
Refactoring and cleanups:
- ELD refactor: Stop using hardware buffer, precompute ELD, and wire up ELD in
the state checker (Ville)
- Use generics for debugfs device parameters (Jani)
- DSB refactoring and fixes (Ville)
- Header refactoring, add new intel_display_limits.h (Jani)
- Split out GMCH code to a new file (Jani)
- Split out vblank code to a new file (Jani)
- i915_drv.h and struct drm_i915_private cleanups (Jani)
- Simplify FBC and DRRS debug attributes (Deepak R Varma)
- Remove some single-use macros (Rodrigo)
Fixes:
- Fix scaler limits for display versions 12 and 13 (Luca)
- Fix plane source size check for zero height (Drew Davenport)
- Implement PSR2 selective fetch workaround (Jouni)
- Expand a PSR workaound to more platforms and pipes (Jouni)
- Expand an HDMI infoframe workaround to all MTL steppings (Jouni)
- Enable PIPEDMC whenever its corresponding pipe is enabled (Imre)
Merges:
- Backmerge drm-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87tu0c44gv.fsf@intel.com
- Moved the driver to the accel subsystem. Currently only the files were
moved (including the uapi file which was also renamed). This doesn't
include registering to the accel subsystem. This will probably be only
in the next kernel version.
- In case of decoder error (axi error) in Gaudi2, we can now find the exact
IP that initiated the erroneous transaction and print the details for
better debug.
- Add more trace events. We now can trace mmio transactions and communication
with the preboot firmware.
- Add to Gaudi2 support for abrupt reset that is done by the firmware. This
was support so far only for Gaudi1.
- Add uAPI to flush memory transactions (to the device memory). This is
needed by the communications library in case of doing p2p with a host NIC
which access our HBM directly through the PCI BAR.
- Add uAPI to pass-through a request from user-space to firmware and get the
result back to user-space. This will allow the driver code to avoid the
need to add new packet (in the communication channel with the firmware) for
every new request type.
- Remove the option to export dma-buf by memory allocation handle in our uAPI.
This was planned for Gaudi2 but was never used. Instead, we will do export
by memory address (same as Gaudi1). In addition, we added the option to
specify an offset to the address. This is needed in Gaudi2 because there
the user allocates the entire HBM in one allocation, but would like to
export only small part of it.
- Multiple bug fixes, refactors and small optimizations.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmPS7fYACgkQZR1NuKta
54Bu/wf+I4dySZslvWhjqom9zYlubnwKLpLxuKGeR2OeMZxe5AJSyNCohmMXjl4S
ac+2qktRbecYXwNHCZBFjybKUgqBN5VuxRNRjV3/It+koON82QkMvBB48CeD7W/P
9y5b38LYOxqFixd5U5e7MpNhU1/AAKGnqEtQZgub0h0IeOrZM0RkTL6PJoUdQAcn
ap3pNXm6cpNKo5EZYlyRwEJRw1YlUKt3lcsKNnBDjij1j+IOtQ0sPA7Ii0YMdtqh
/gL81JkyZmgQBq9aGjr8vGyILvVTfm8qJu7t4hGEZ165bAP4bQaU9W+YMDgpKmgM
Bc+NghtCz13gmKPY/gudP5fDbPHUdA==
=fOxf
-----END PGP SIGNATURE-----
Merge tag 'drm-habanalabs-next-2023-01-26' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver and accel changes for v6.3:
- Moved the driver to the accel subsystem. Currently only the files were
moved (including the uapi file which was also renamed). This doesn't
include registering to the accel subsystem. This will probably be only
in the next kernel version.
- In case of decoder error (axi error) in Gaudi2, we can now find the exact
IP that initiated the erroneous transaction and print the details for
better debug.
- Add more trace events. We now can trace mmio transactions and communication
with the preboot firmware.
- Add to Gaudi2 support for abrupt reset that is done by the firmware. This
was support so far only for Gaudi1.
- Add uAPI to flush memory transactions (to the device memory). This is
needed by the communications library in case of doing p2p with a host NIC
which access our HBM directly through the PCI BAR.
- Add uAPI to pass-through a request from user-space to firmware and get the
result back to user-space. This will allow the driver code to avoid the
need to add new packet (in the communication channel with the firmware) for
every new request type.
- Remove the option to export dma-buf by memory allocation handle in our uAPI.
This was planned for Gaudi2 but was never used. Instead, we will do export
by memory address (same as Gaudi1). In addition, we added the option to
specify an offset to the address. This is needed in Gaudi2 because there
the user allocates the entire HBM in one allocation, but would like to
export only small part of it.
- Multiple bug fixes, refactors and small optimizations.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126213317.GA1520525@ogabbay-vm-u20.habana-labs.com
Leo (Hanghong) Ma
Aurabindo Pillai
Wesley Chalmers
Hamza Mahfooz
Kenneth Feng
Alex Deucher
Yifan Zha
Vitaly Prosyak
Guilherme G. Piccoli
Tom Rix
ye xingchen
Jonathan Neuschäfer
Yiqing Yao
Mario Limonciello
Evan Quan
Tim Huang
Aric Cyr
Hersen Wu
Nicholas Kazlauskas
George Shen
Mustapha Ghaddar
Daniel Miess
Vladimir Stempen
Leon Huang
Fangzhi Zuo
Samson Tam
Wenjing Liu
Sung Joon Kim
Graham Sider
Daniel Vetter
Dave Airlie
Linus Torvalds