Turris Omnia's MCU provides various features that can be configured over
I2C at address 0x2a. Add device-tree node.
This does not carry a Fixes tag - we do not want this to get backported
to stable kernels for the following reason: U-Boot since v2022.10
inserts a phy-reset-gpio property into the WAN ethernet node pointing to
the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu
compatible. Thus if this change got backported to a stable kernel, the
WAN interface driver would defer probe indefinitely (since it would wait
for the turris-omnia-mcu driver which would not be present).
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20240701113010.16447-8-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for GPIOs connected to the MCU on the Turris Omnia board.
This includes:
- front button pin
- enable pins for USB regulators
- MiniPCIe / mSATA card presence pins in MiniPCIe port 0
- LED output pins from WAN ethernet PHY, LAN switch and MiniPCIe ports
- on board revisions 32+ also various peripheral resets and another
voltage regulator enable pin
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-4-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Framework laptops implement a custom charge control EC command.
The upstream CrOS EC command is also present and functional but can get
overridden by the custom one.
Until Framework make both commands compatible or remove their custom
one, don't load the driver on those machines.
If the user knows they are not going to use the custom command they can
use a module parameter to load cros_charge-control anyways.
Note that the UEFI setup configuration for battery control also uses
their custom command.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240630-cros_ec-charge-control-v5-5-8f649d018c52@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Retrieving the supported versions of a command is a fairly common
operation. Provide a helper for it.
If the command is not supported at all the EC returns
-EINVAL/EC_RES_INVALID_PARAMS.
This error is translated into an empty version mask as that is easier to
handle for callers and they don't need to know about the error details.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240630-cros_ec-charge-control-v5-3-8f649d018c52@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
simple-audio-mux is designed to be used generally, thus "Input 1" or
"Input 2" are used to selecting MUX input. This numbered inputs would
work, but might be not user friendly in some case, for example in case
of system hardware design has some clear labels.
Adds new "state-labels" property and enable to select MUX by own state
names.
Original
> amixer set "MUX" "Input 1"
Use mux-names
sound_mux: mux {
compatible = "simple-audio-mux";
mux-gpios = <...>;
state-labels = "Label_A", "Label_B";
};
> amixer set "MUX" "Label_A"
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msn27xpg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check that all fields of a V2 algorithm header fit into the available
firmware data buffer.
The wmfw V2 format introduced variable-length strings in the algorithm
block header. This means the overall header length is variable, and the
position of most fields varies depending on the length of the string
fields. Each field must be checked to ensure that it does not overflow
the firmware data buffer.
As this ia bugfix patch, the fixes avoid making any significant change to
the existing code. This makes it easier to review and less likely to
introduce new bugs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load()
to be done before the block is processed.
The check that the length of a block payload does not exceed the number
of remaining bytes in the firwmware file buffer was being done near the
end of the loop iteration. However, some code before that check used the
length field without validating it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return an error from cs_dsp_power_up() if a block header is longer
than the amount of data left in the file.
The previous code in cs_dsp_load() and cs_dsp_load_coeff() would loop
while there was enough data left in the file for a valid region. This
protected against overrunning the end of the file data, but it didn't
abort the file processing with an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the checking that firmware file buffer is large enough for the
wmfw header, to prevent overrunning the buffer.
The original code tested that the firmware data buffer contained
enough bytes for the sums of the size of the structs
wmfw_header + wmfw_adsp1_sizes + wmfw_footer
But wmfw_adsp1_sizes is only used on ADSP1 firmware. For ADSP2 and
Halo Core the equivalent struct is wmfw_adsp2_sizes, which is
4 bytes longer. So the length check didn't guarantee that there
are enough bytes in the firmware buffer for a header with
wmfw_adsp2_sizes.
This patch splits the length check into three separate parts. Each
of the wmfw_header, wmfw_adsp?_sizes and wmfw_footer are checked
separately before they are used.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
NOWS is one of the annoying "0's based values" in NVMe, where 0 means one
and we thus can't detect if it isn't set. Thus a NOWS value of 0 means
that the Namespace Optimal Write Size is a single LBA, which is clearly
bogus. Ignore the value in that case and don't propagate an io_opt
value to the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240701051800.1245240-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
My earlier fix missed an incorrect function prototype that shows up on
native 32-bit builds:
In file included from fs/notify/fanotify/fanotify_user.c:14:
include/linux/syscalls.h:248:25: error: conflicting types for 'sys_fanotify_mark'; have 'long int(int, unsigned int, u32, u32, int, const char *)' {aka 'long int(int, unsigned int, unsigned int, unsigned int, int, const char *)'}
1924 | SYSCALL32_DEFINE6(fanotify_mark,
| ^~~~~~~~~~~~~~~~~
include/linux/syscalls.h:862:17: note: previous declaration of 'sys_fanotify_mark' with type 'long int(int, unsigned int, u64, int, const char *)' {aka 'long int(int, unsigned int, long long unsigned int, int, const char *)'}
On x86 and powerpc, the prototype is also wrong but hidden in an #ifdef,
so it never caused problems.
Add another alternative declaration that matches the conditional function
definition.
Fixes: 403f17a330 ("parisc: use generic sys_fanotify_mark implementation")
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now we avoid throttling swap writes by determining whether the current
process is kswapd (aka current_is_kswapd()), but swap writes can come
from either kswapd or direct reclaim, so the swap writes from direct
reclaim will still be throttled.
When a process holds a lock to allocate a free page, and enters direct
reclaim because there is no free memory, then it might trigger a hung
due to the wbt throttling that causes other processes to fail to get
the lock.
Both kswapd and direct reclaim set the REQ_SWAP flag, so use REQ_SWAP
instead of current_is_kswapd() to avoid throttling swap writes. Also
renamed WBT_KSWAPD to WBT_SWAP and WBT_RWQ_KSWAPD to WBT_RWQ_SWAP.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240604030522.3686177-1-libaokun@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a a driver for the Huion Inspiroy 2S in both modes (firmware mode
and tablet mode). This device has 6 buttons and a wheel, all of which
send key combinations (see the comments for the defaults). Luckily the
device is quite limited in that it only supports one button down at a
time, so with this BPF we can simply remap the 8 possible report IDs to
our own custom-built report descriptor.
If the device is in tablet mode (e.g. using huion-switcher it sends
everything through the vendor report instead). This BPF program converts
both, depending which devices you attach to you get both. Or if you
attach to all hid devices you get a duplicate device but it'll work
either way.
This BPF should be mostly compatible for the M and L as well though they
have more buttons so the rdescs will need some minor rework.
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/85
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/109
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20240627-import-bpf-v1-2-0dbcda4a5b1f@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
These macros make it slightly easier and more modular to create
a HID report descriptor from scratch. Since they carry the annotation
we don't need to comment it and they cannot get stale.
For comparison, before we had this:
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x95, 0x04, // Report Count (4)
0x75, 0x01, // Report Size (1)
Now we can write this as:
LogicalRange_i8(0, 1)
ReportCount(4)
ReportSize(1)
Because these macros are for creating new report descriptors,
some bits aren't directly exposed. e.g in the example above:
there is a logical range as one macro that sets both min and max.
There is seldom a good use case for skipping either anyway.
These macros will need to be expanded over time.
For Usage Pages and Usage IDs, we use a tool to parse the HUT JSON
(attached to the HUT 1.5 PDF [1]) and generate all #defines for all
usage pages and usages in the form:
#define UsagePage_Foo_Bar
#define Usage_FB_SomeOrOther
Where the FB is simply the acronym based on the capital letters in the
Usage Page name or the first three letters, whichever makes slightly
more sense.
[1] https://usb.org/document-library/hid-usage-tables-15
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/92
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/96
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20240627-import-bpf-v1-1-0dbcda4a5b1f@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We had the following errors while doing make htmldocs:
Documentation/hid/hid-bpf:185: include/linux/hid_bpf.h:144:
ERROR: Unexpected indentation.
Documentation/hid/hid-bpf:185: include/linux/hid_bpf.h:145:
WARNING: Block quote ends without a blank line;
unexpected unindent.
Documentation/hid/hid-bpf:185: include/linux/hid_bpf.h:147:
ERROR: Unexpected indentation.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 8bd0488b5e ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests")
Link: https://patch.msgid.link/20240701-fix-cki-v2-3-20564e2e1393@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
This patch supports driver APIs "add_sub_dev" and "del_sub_dev", to
add and delete a plane device respectively.
A mlx5 plane device is a rdma SMI device; It provides the SMI capability
through user MAD for it's parent, the logical multi-plane aggregated
device. For a plane port:
- It supports QP0 only;
- When adding a plane device, all plane ports are added;
- For some commands like mad_ifc, both plane_index and native portnum
is needed;
- When querying or modifying a plane port context, the native portnum
must be used, as the query/modify_hca_vport_context command doesn't
support plane port.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/e933cd0562aece181f8657af2ca0f5b387d0f14e.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
