i.MX95 has a DDR PMU which is almostly same as i.MX93, it now supports
read beat and write beat filter capabilities. This will add support for
i.MX95 and enhance the driver to support specific filter handling for it.
Usage:
For read beat:
~# perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_beat_filt2,axi_mask=ID_MASK,axi_id=ID/
~# perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_beat_filt1,axi_mask=ID_MASK,axi_id=ID/
~# perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_beat_filt0,axi_mask=ID_MASK,axi_id=ID/
eg: For edma2: perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_beat_filt0,axi_mask=0x00f,axi_id=0x00c/
For write beat:
~# perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_wr_beat_filt,axi_mask=ID_MASK,axi_id=ID/
eg: For edma2: perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_wr_beat_filt,axi_mask=0x00f,axi_id=0x00c/
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240529080358.703784-6-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
In current design, the user of perf app needs to input counter ID to count
events. However, this is not user-friendly since the user needs to lookup
the map table to find the counter. Instead of letting the user to input
the counter, let this driver to manage the counters in this patch.
This will be implemented by:
1. allocate counter 0 for cycle event.
2. find unused counter from 1-10 for reference events.
3. allocate specific counter for counter-specific events.
In this patch, counter attr will be kept for back-compatible but all the
value passed down by counter=<n> will be ignored. To mark counter-specific
events, counter ID will be encoded into perf_pmu_events_attr.id.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240529080358.703784-3-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Add TPM device found on Verdin iMX8M Mini PID4 0090 variant.
While adding the node, rename `pinctrl_pmic_tpm_ena` to
`pinctrl_tpm_spi_cs`.
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add audio XCVR sound card, which supports SPDIF TX & RX,
eARC RX, ARC RX functions.
HDMI_HPD is shared with the HDMI module so use pinctrl_hog.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
XCVR (Audio Transceiver) is a on-chip functional module found
on i.MX8MP. It supports HDMI2.1 eARC, HDMI1.4 ARC and SPDIF.
The reset controller is provided by the audio block control driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The production DH i.MX8MP DHCOM SoM rev.200 uses updated PHY MDIO addresses
for the Fast ethernet PHYs. Update the base SoM DT to cater for this change.
Prototype rev.100 SoM was never publicly available and was manufactured in
limited series, anything currently available is rev.200 or newer, so it is
safe to update the DT this way.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DH i.MX8M Plus DHCOM SoM uses Audio PLL2 to supply clock to CLKOUT2
output. Those clock are used to supply on-SoM TC9595 DSI-to-(e)DP bridge
with RefClk and must not be reconfigured, otherwise the bridge cannot
work correctly. Stop reconfiguring Audio PLL2 on this SoM.
Fixes: f560da940e ("arm64: dts: imx8mp: Initialize audio PLLs from audiomix subsystem")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename b(q)man-portals to b(q)man-portals-bus to fix below CHECK_DTB
warnings.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb:
bman-portals@508000000: $nodename:0: 'bman-portals@508000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add thermal subfix for thermal node to fix below CHECK_DTB warnings.
thermal-zones: '...' do not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
clk-name is undocument property and never used in watchdog driver. Remove
it and fix below CHECK_DTB warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: watchdog@2ad0000: Unevaluated properties are not allowed ('big-endian', 'clock-names' were unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename aux_bus to aux-bus to fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb:
aux_bus: $nodename:0: 'aux_bus' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yam
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename node name "wdt" to "watchdog" to fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb:
wdt@c000000: $nodename:0: 'wdt@c000000' does not match '^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add #dma-cells for qdma to fix below warning.
dma-controller@8380000: '#dma-cells' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fman3 should use 'fsl,fman-memac-mdio'. 'fsl,fman-xmdio' is for fman2.
Fix below CHECK_DTBS warning.
fman@1a00000: mdio@eb000:compatible: ['fsl,fman-memac-mdio', 'fsl,fman-xmdio'] is too long
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Replace node name 'nor' with 'flash' to fix below CHECK_DTBS warning.
nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Workaround already applied unconditional at
commit a6ba1e4531 ("usb: dwc3: apply snps,host-vbus-glitches workaround unconditionally")
Remove it to fix CHECK_DTBS warning:
usb@2f00000: Unevaluated properties are not allowed ('snps,host-vbus-glitches' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add platform special compatible string for all gpio controller to fix
below warning.
gpio@2300000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,qoriq-gpio'] is too short
'fsl,qoriq-gpio' is not one of ['fsl,mpc5121-gpio', 'fsl,mpc5125-gpio', 'fsl,mpc8349-gpio', 'fsl,mpc8572-gpio', 'fsl,mpc8610-gpio', 'fsl,pq3-gpio']
'fsl,qoriq-gpio' is not one of ['fsl,ls1021a-gpio', 'fsl,ls1028a-gpio', 'fsl,ls1043a-gpio', 'fsl,ls1088a-gpio', 'fsl,ls2080a-gpio']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to fsl,dsp.yaml, 'memory-region' is a required property.
Pass 'memory-region' to fix the following dt-schema warning:
imx8qxp-mek.dtb: dsp@596e8000: 'memory-region' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add '#address-cells' and '#size-cells' for all I2C to avoid duplicate these
at every board files.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use SPI common properties 'spi-cs-setup-delay-ns' and
'spi-cs-hold-delay-ns', mark private properties 'fsl,spi-cs-sck-delay'
and 'fsl,spi-sck-cs-delay' as deprecated.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Reorder lpi2c2, lpi2c3, mu1 and mu2 label in alphabetical order.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move node "rtc@53" to existed "&lpi2c3" and remove redundant
"&lpi2c3" label.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX fixes for 6.10:
- Fix GPIO number for reg_usdhc2_vmmc on imx8qm-mek board.
- Enable hysteresis for SODIMM_17 pin on imx8mm-verdin board to increase
immunity against noise.
- Remove 'no-sdio' property for uSDHC2 on imx93-11x11-evk board, so that
SDIO cards could also work.
- Fix BT shutdown GPIO for imx8mp-venice-gw73xx-2x board.
- Fix panel node deleting on imx53-qsb-hdmi, as /delete-node/ directive
doesn't really delete a node in a DT overlay.
- Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM.
- Fix GPU speed for imx8mm-verdin board by enabling overdrive mode in
the SOM dtsi.
The GW7400 has an onboard DP83867 RGMII GbE PHY:
- add RGMII delay and FIFO configuration
- add LED configuration required to use them via netdev trigger:
two LED's (LED1 and LED2, skipping LED0).
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW702x SoM has an onboard DP83867 RGMII GbE PHY that drives two
LED's (LED1 and LED2, skipping LED0). Add the appropriate dt bindings to
allow these PHY LED's to be controlled via a netdev trigger.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW700x SoM has an onboard DP83867 RGMII GbE PHY that drives two
LED's (LED1 and LED2, skipping LED0). Add the appropriate dt bindings to
allow these PHY LED's to be controlled via a netdev trigger.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix the dt-schema warnings due to #address-cells/#size-cells being
unnecessary when there are no children with reg cells.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The pgc_mlmix shows a power-domain@24, but the reg value is
IMX8MP_POWER_DOMAIN_MLMIX which is set to 4.
The stuff after the @ symbol should match the stuff referenced
by 'reg' so reorder the pgc_mlmix so it to appear as power-domain@4.
Fixes: 834464c850 ("arm64: dts: imx8mp: add mlmix power domain")
Fixes: 4bedc468b7 ("arm64: dts: imx8mp: Add NPU Node")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
During kbuild, with W=1, modpost will warn when a module doesn't have
a MODULE_DESCRIPTION(). The encrypted-keys module does not have a
MODULE_DESCRIPTION(). But currently, even with an allmodconfig
configuration, this module is built-in, and as a result, kbuild does
not currently warn about the missing MODULE_DESCRIPTION().
However, just in case it is built as a module in the future, add the
missing MODULE_DESCRIPTION() macro invocation.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
kbuild reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in security/keys/trusted-keys/trusted.o
Add the missing MODULE_DESCRIPTION() macro invocation.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
