Add DEFINE_FLEX() macro for on-stack allocations of structs with
flexible array member.
Expose __struct_size() macro outside of fortify-string.h, as it could be
used to read size of structs allocated by DEFINE_FLEX().
Move __member_size() alongside it.
-Kees
Using underlying array for on-stack storage lets us to declare
known-at-compile-time structures without kzalloc().
Actual usage for ice driver is in following patches of the series.
Missing __has_builtin() workaround is moved up to serve also assembly
compilation with m68k-linux-gcc, see [1].
Error was (note the .S file extension):
In file included from ../include/linux/linkage.h:5,
from ../arch/m68k/fpsp040/skeleton.S:40:
../include/linux/compiler_types.h:331:5: warning: "__has_builtin" is not defined, evaluates to 0 [-Wundef]
331 | #if __has_builtin(__builtin_dynamic_object_size)
| ^~~~~~~~~~~~~
../include/linux/compiler_types.h:331:18: error: missing binary operator before token "("
331 | #if __has_builtin(__builtin_dynamic_object_size)
| ^
[1] https://lore.kernel.org/netdev/202308112122.OuF0YZqL-lkp@intel.com/
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20230912115937.1645707-2-przemyslaw.kitszel@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sebastian Andrzej Siewior says:
====================
bpf: Remove xdp_do_flush_map().
I had #1 split in several patches per vendor and then decided to merge
it. I can repost it with one patch per vendor if this preferred.
====================
Link: https://lore.kernel.org/r/20230908143215.869913-1-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukasz Majewski says:
====================
net: dsa: hsr: Enable HSR HW offloading for KSZ9477
This patch series provides support for HSR HW offloading in KSZ9477
switch IC.
To test this feature:
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
ip link set dev lan1 up
ip link set dev lan2 up
ip a add 192.168.0.1/24 dev hsr0
ip link set dev hsr0 up
To remove HSR network device:
ip link del hsr0
To test if one can adjust MAC address:
ip link set lan2 address 00:01:02:AA:BB:CC
It is also possible to create another HSR interface, but it will
only support HSR is software - e.g.
ip link add name hsr1 type hsr slave1 lan3 slave2 lan4 supervision 45 version 1
Test HW:
Two KSZ9477-EVB boards with HSR ports set to "Port1" and "Port2".
Performance SW used:
nuttcp -S --nofork
nuttcp -vv -T 60 -r 192.168.0.2
nuttcp -vv -T 60 -t 192.168.0.2
Code: v6.6.0-rc2+ Linux net-next repository
SHA1: 5a1b322cb0
Tested HSR v0 and v1
Results:
With KSZ9477 offloading support added: RX: 100 Mbps TX: 98 Mbps
With no offloading RX: 63 Mbps TX: 63 Mbps
====================
Link: https://lore.kernel.org/r/20230922133108.2090612-1-lukma@denx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds functions for providing in KSZ9477 switch HSR
(High-availability Seamless Redundancy) hardware offloading.
According to AN3474 application note following features are provided:
- TX packet duplication from host to switch (NETIF_F_HW_HSR_DUP)
- RX packet duplication discarding
- Prevention of packet loop
For last two ones - there is a probability that some packets will not
be filtered in HW (in some special cases - described in AN3474).
Hence, the HSR core code shall be used to discard those not caught frames.
Moreover, some switch registers adjustments are required - like setting
MAC address of HSR network interface.
Additionally, the KSZ9477 switch has been configured to forward frames
between HSR ports (e.g. 1,2) members to provide support for
NETIF_F_HW_HSR_FWD flag.
Join and leave functions are written in a way, that are executed with
single port - i.e. configuration is NOT done only when second HSR port
is configured.
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Defining macros which have the same name but different values is bad
practice, because it makes it hard to avoid code duplication. The same
code does different things, depending on the file it's placed in.
Case in point, we want to access REG_SW_MAC_ADDR from ksz_common.c, but
currently we can't, because we don't know which kszXXXX_reg.h to include
from the common code.
Remove the REG_SW_MAC_ADDR_{0..5} macros from ksz8795_reg.h and
ksz9477_reg.h, and re-add this register offset to the dev->info->regs[]
array.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The KSZ9477 has support for HSR (High-Availability Seamless Redundancy).
One of its offloading (i.e. performed in the switch IC hardware) features
is to duplicate received frame to both HSR aware switch ports.
To achieve this goal - the tail TAG needs to be modified. To be more
specific, both ports must be marked as destination (egress) ones.
The NETIF_F_HW_HSR_DUP flag indicates that the device supports HSR and
assures (in HSR core code) that frame is sent only once from HOST to
switch with tail tag indicating both ports.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In some cases, drivers may need to veto the changing of a MAC address on
a user port. Such is the case with KSZ9477 when it offloads a HSR device,
because it programs the MAC address of multiple ports to a shared
hardware register. Those ports need to have equal MAC addresses for the
lifetime of the HSR offload.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Drivers can provide meaningful error messages which state a reason why
they can't perform an offload, and dsa_slave_changeupper() already has
the infrastructure to propagate these over netlink rather than printing
to the kernel log. So pass the extack argument and modify the xrs700x
driver's port_hsr_join() prototype.
Also take the opportunity and use the extack for the 2 -EOPNOTSUPP cases
from xrs700x_hsr_join().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
'n_tables' is small, UDP_TUNNEL_NIC_MAX_TABLES = 4 as a maximum. So there
is no real point to allocate the 'entries' pointers array with a dedicate
memory allocation.
Using a flexible array for struct udp_tunnel_nic->entries avoids the
overhead of an additional memory allocation.
This also saves an indirection when the array is accessed.
Finally, __counted_by() can be used for run-time bounds checking if
configured and supported by the compiler.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/4a096ba9cf981a588aa87235bb91e933ee162b3d.1695542544.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As we don't specify the MTU in the driver, the framework
will fall back to 1500 bytes and this doesn't work very
well when we try to attach a DSA switch:
eth1: mtu greater than device maximum
ixp4xx_eth c800a000.ethernet eth1: error -22 setting
MTU to 1504 to include DSA overhead
I checked the developer docs and the hardware can actually
do really big frames, so update the driver accordingly.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230923-ixp4xx-eth-mtu-v1-1-9e88b908e1b2@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet says:
====================
tcp_metrics: four fixes
Looking at an inconclusive syzbot report, I was surprised
to see that tcp_metrics cache on my host was full of
useless entries, even though I have
/proc/sys/net/ipv4/tcp_no_metrics_save set to 1.
While looking more closely I found a total of four issues.
====================
Link: https://lore.kernel.org/r/20230922220356.3739090-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is inspired by several syzbot reports where
tcp_metrics_flush_all() was seen in the traces.
We can avoid acquiring tcp_metrics_lock for empty buckets,
and we should add one cond_resched() to break potential long loops.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcp_init_metrics() only wants to get metrics if they were
previously stored in the cache. Creating an entry is adding
useless costs, especially when tcp_no_metrics_save is set.
Fixes: 51c5d0c4b1 ("tcp: Maintain dynamic metrics in local cache.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to set tp->snd_ssthresh to TCP_INFINITE_SSTHRESH
in the case tcp_get_metrics() fails for some reason.
Fixes: 9ad7c049f0 ("tcp: RFC2988bis + taking RTT sample from 3WHS for the passive open side")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When removing an item from RCU protected list, we must prevent
store-tearing, using rcu_assign_pointer() or WRITE_ONCE().
Fixes: 04f721c671 ("tcp_metrics: Rewrite tcp_metrics_flush_all")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kees Cook says:
====================
mlxsw: Annotate structs with __counted_by
This annotates several mlxsw structures with the coming __counted_by attribute
for bounds checking of flexible arrays at run-time. For more details, see
commit dd06e72e68 ("Compiler Attributes: Add __counted_by macro").
====================
Link: https://lore.kernel.org/r/20230929180611.work.870-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kees Cook says:
====================
Batch 1: Annotate structs with __counted_by
This is the batch 1 of patches touching netdev for preparing for
the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by to structs that would
benefit from the annotation.
Since the element count member must be set before accessing the annotated
flexible array member, some patches also move the member's initialization
earlier. (These are noted in the individual patches.)
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
====================
Link: https://lore.kernel.org/r/20230922172449.work.906-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
mlxsw: Provide enhancements and new feature
Vadim Pasternak writes:
Patch #1 - Optimize transaction size for efficient retrieval of module
data.
Patch #3 - Enable thermal zone binding with new cooling device.
Patch #4 - Employ standard macros for dividing buffer into the chunks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use standard macro DIV_ROUND_UP() to determine the number of chunks
required for a given buffer.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the list of allowed external cooling devices for thermal zone
binding to include devices of type "emc2305".
The motivation is to provide support for the system SN2201, which is
equipped with the Spectrum-1 ASIC.
The system's airflow control is managed by the EMC2305 RPM-based PWM
Fan Speed Controller as the cooling device.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MTBR register is used to read temperatures from multiple sensors in
one transaction, but the driver only reads from a single sensor in each
transaction.
Rrestrict the payload size of the MTBR register to prevent the
transmission of redundant data to the firmware.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
