Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
Replace or drop the legacy header that is subject to remove.
Not all of them were compile-tested, the series might have
hidden compilation errors.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The acpi_get_local_address() helper assumes a 32-bit ADR is used. If
we want to use this helper for SoundWire/SDCA ASoC codecs, we need an
extension where the native 64-bits are used. This patchset suggests a
new helper, acpi_get_local_address() may be renamed if desired in a
folow-up patch.
The path of least resistance would be to merge this patchset in the
ASoC tree, since I have additional changes for ASoC/SDCA (SoundWire
Device Class) that depend on the new helper.
Pierre-Louis Bossart (3):
ACPI: utils: introduce acpi_get_local_u64_address()
soundwire: slave: simplify code with acpi_get_local_u64_address()
ALSA: hda: intel-sdw-acpi: use acpi_get_local_u64_address()
drivers/acpi/utils.c | 22 ++++++++++++++++------
drivers/soundwire/slave.c | 13 ++++---------
include/linux/acpi.h | 1 +
sound/hda/intel-sdw-acpi.c | 6 +++---
4 files changed, 24 insertions(+), 18 deletions(-)
--
2.43.0
Merge series from Mohammad Rafi Shaik <quic_mohs@quicinc.com>:
This patchset adds support for Qualcomm WCD9370/WCD9375 codec.
Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire devices, RX and
TX respectively supporting 3 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
6 DMICs and MBHC.
For codec driver to be functional it would need both tx and rx Soundwire devices
to be up and this is taken care by using device component framework and device-links
are used to ensure proper pm dependencies. Ex tx does not enter suspend
before rx or codec is suspended.
This patchset along with other SoundWire patches on the list
have been tested on QCM6490 IDP device.
This patch adds basic SoundWire codec driver to support for
WCD9370/WCD9375 TX and RX devices.
The WCD9370/WCD9375 has Multi Button Headset Control hardware to
support Headset insertion, type detection, 8 headset buttons detection,
Over Current detection and Impedence measurements.
This patch adds support for this using wcd-mbhc apis.
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Link: https://lore.kernel.org/r/20240524035535.3119208-4-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the Qualcomm WCD9370/WCD9375 Audio Codec and the
Soundwire devices than can be found on Qualcomm QCM6490 based platforms.
The Qualcomm WCD9370/WCD9375 Audio Codec communicates
with the host SoC over 2 Soundwire links to provide:
- 3 TX ADC paths with 4 differential AMIC inputs
- 6 DMIC inputs that are shared with AMIC input
- 4 Microphone BIAS
- RX paths with 4 PAs – HPHL/R, EAR and AUX
- Stereo Headphone output
- MBHC engine for Headset Detection
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Co-developed-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240524035535.3119208-2-quic_mohs@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We have simple-card / audio-graph / audio-graph2, basically these supports
same feature but is using different DT style.
Because we are using 3 drivers, some feature was added to one driver,
but other drivers doesn't have it. This patch set try to sync it on these
3 drivers.
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
On i.MX95 wakeup domain, there is one instance of Audio XCVR
supporting SPDIF mode with a connection to the Audio XCVR physical
interface.
On i.MX95, the XCVR uses a new PLL in the PHY, which is
General Purpose (GP) PLL. Add GP PLL configuration support
in the driver and add the 'pll_ver' flag to distinguish
different PLL on different platforms.
The XCVR also use PHY but limited for SPDIF only case
Add 'use_phy' flag to distinguish these platforms.
When there are 'pll8k' and 'pll11k' clock existing, the clock
source of 'phy_clk' can be changed for different sample rate
requirement.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://msgid.link/r/1716972002-2315-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string "fsl,imx95-xcvr" for i.MX95 platform.
The difference between each platform is in below table.
+---------+--------+----------+--------+
| SOC | PHY | eARC/ARC | SPDIF |
+---------+--------+----------+--------+
| i.MX8MP | V1 | Yes | Yes |
+---------+--------+----------+--------+
| i.MX93 | N/A | N/A | Yes |
+---------+--------+----------+--------+
| i.MX95 | V2 | N/A | Yes |
+---------+--------+----------+--------+
On i.MX95, there are two PLL clock sources, they are the parent
clocks of the XCVR root clock. one is for 8kHz series rates, named
as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'.
They are optional clocks, if there are such clocks, then the driver
can switch between them to support more accurate sample rates.
As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for
clocks and clock-names properties.
On i.MX95, the 'interrupts' configuration has the same constraint
as i.MX93.
Only on i.MX8MP, the 'resets' is required, but for i.MX95 and i.MX93
there is no such hardware setting.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://msgid.link/r/1716972002-2315-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card is checking if the node name was "ports" or
not when parsing the property.
if (of_node_name_eq(ports, "ports"))
of_xxx(ports, ...);
Now, it is using new port_to_ports() which will be NULL if the node
doesn't have "ports", and each of_xxx functions will do nothing if
node was NULL.
Now we don't need to check ports node name. Let's remove and cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/871q5mh6fv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card is using of_get_parent() to get "port" from
"ep", or get "ports" from "port". But it is difficlut to understand,
and "ports" might not exist.
This patch adds ep_to_port() to get "port" from "ep", and port_to_ports()
to get "ports" from "port". "ports" will be NULL if not exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/8734q2h6fz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current dai_link related property are parsed and enabled only on CPU
port node (A)(b)(c). OTOH, Audio Graph Card2 supports many connections
like Multi-CPU, DPCM, Codec2Codec today. For example in Multi-CPU case,
it will be checked via (X) -> (B) -> (b) process, but (X) / (B) part
property is not parsed.
>From dai_link related settings point of view, (B) (C) part and Codec
port also enabled is more viscerally understandable, and useful.
card2 {
(X) links = <&snd-cpu (A)
&snd-multi (B)
&snd-dpcm (C)
...>
multi {
ports {
(B) snd-multi: port { ... };
...
};
};
dpcm {
ports {
(C) snd-dpcm: port { ... };
...
};
};
codec2codec {
...
};
};
cpu_device {
ports {
(A) snd-cpu: port { ... };
(b) mcpu: port { ... };
(c) dcpu: port { ... };
}
};
One note here is that if it was Multi-CPU/Codec case, 1st port only
enabled to have property it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/875xuyh6g7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card2 is checking if the node name was "ports" or
not when parsing the property.
if (of_node_name_eq(ports, "ports"))
of_xxx(ports, ...);
Now, it is using new port_to_ports() which will be NULL if the node
doesn't have "ports", and each of_xxx functions will do nothing if
node was NULL.
Now we don't need to check ports node name. Let's remove and cleanup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/877cfeh6gb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card2 is using of_get_parent() to get "port" from
"ep", or get "ports" from "port". But it is difficlut to understand,
and "ports" might not exist.
This patch adds ep_to_port() to get "port" from "ep", and port_to_ports()
to get "ports" from "port". "ports" will be NULL if not exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/878qzuh6gf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm.c :: soc_get_playback_capture() will indicate error
if both playback_only / capture_only were true.
Thus, graph_util_parse_link_direction() which setup playback_only /
capture_only don't need to check it.
And, its return value is not used on existing driver. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87a5kah6gm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
