Bindings:
- Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm, qcom,i2c-qup,
qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new props), qcom,smp2p, TI
timer, Mediatek gnss, Mediatek topckgen, Mediatek apmixedsys, Mediatek
infracfg, fsl,ls-extirq, fsl,layerscape-dcfg, QCom PMIC SPMI,
rda,8810pl-timer, Xilinx zynqmp_ipi, uniphier-pcie, and Ilitek
touchscreen controllers
- Convert various Arm Ltd peripheral IP bindings to schemas
- New bindings for Menlo board CPLD, DH electronics board CPLD,
Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751
GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and Microchip/SMSC
LAN95xx USB Ethernet controllers
- Add vendor prefix for Enclustra
- Add various compatible string additions
- Various example fixes and cleanups
- Remove unused hisilicon,hi6220-reset binding
- Treewide fix properties missing type definition
- Drop some empty and unreferenced .txt bindings
- Documentation improvements for writing schemas
DT driver core:
- Drop static IRQ resources for DT platform devices as IRQ setup is
dynamic and drivers have all been converted to use platform_get_irq()
and friends
- Rework memory allocations and frees for overlays
- Continue overlay notifier callbacks on successful calls and add
unittests
- Handle 'interrupts-extended' in early DT IRQ setup
- Fix of_property_read_string() errors to match documentation
- Ignore disabled nodes in FDT API calls
-----BEGIN PGP SIGNATURE-----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=OUL3
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Convert smsc,lan91c111, qcom,spi-qup, qcom,msm-uartdm,
qcom,i2c-qup, qcom,gsbi, i2c-mt65xx, TI wkup_m3_ipc (and new
props), qcom,smp2p, TI timer, Mediatek gnss, Mediatek topckgen,
Mediatek apmixedsys, Mediatek infracfg, fsl,ls-extirq,
fsl,layerscape-dcfg, QCom PMIC SPMI, rda,8810pl-timer, Xilinx
zynqmp_ipi, uniphier-pcie, and Ilitek touchscreen controllers
- Convert various Arm Ltd peripheral IP bindings to schemas
- New bindings for Menlo board CPLD, DH electronics board CPLD,
Qualcomm Geni based QUP I2C, Renesas RZ/G2UL OSTM, Broafcom BCM4751
GNSS, MT6360 PMIC, ASIX USB Ethernet controllers, and
Microchip/SMSC LAN95xx USB Ethernet controllers
- Add vendor prefix for Enclustra
- Add various compatible string additions
- Various example fixes and cleanups
- Remove unused hisilicon,hi6220-reset binding
- Treewide fix properties missing type definition
- Drop some empty and unreferenced .txt bindings
- Documentation improvements for writing schemas
DT driver core:
- Drop static IRQ resources for DT platform devices as IRQ setup is
dynamic and drivers have all been converted to use
platform_get_irq() and friends
- Rework memory allocations and frees for overlays
- Continue overlay notifier callbacks on successful calls and add
unittests
- Handle 'interrupts-extended' in early DT IRQ setup
- Fix of_property_read_string() errors to match documentation
- Ignore disabled nodes in FDT API calls"
* tag 'devicetree-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (86 commits)
of/irq: fix typo in comment
dt-bindings: Fix properties without any type
Revert "dt-bindings: mailbox: qcom-ipcc: add missing properties into example"
dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings
dt-bindings: timer: samsung,exynos4210-mct: define strict clock order
dt-bindings: timer: samsung,exynos4210-mct: drop unneeded minItems
dt-bindings: timer: cdns,ttc: drop unneeded minItems
dt-bindings: mailbox: zynqmp_ipi: convert to yaml
dt-bindings: usb: ci-hdrc-usb2: fix node node for ethernet controller
dt-bindings: net: add schema for Microchip/SMSC LAN95xx USB Ethernet controllers
dt-bindings: net: add schema for ASIX USB Ethernet controllers
of/fdt: Ignore disabled memory nodes
dt-bindings: arm: fix typos in compatible
dt-bindings: mfd: Add bindings child nodes for the Mediatek MT6360
dt-bindings: display: convert Arm Komeda to DT schema
dt-bindings: display: convert Arm Mali-DP to DT schema
dt-bindings: display: convert Arm HDLCD to DT schema
dt-bindings: display: convert PL110/PL111 to DT schema
dt-bindings: arm: convert vexpress-config to DT schema
dt-bindings: arm: convert vexpress-sysregs to DT schema
...
Intel PT:
- Allow hardware tracing on KVM test programs. In this case, the VM is not
running an OS, but only the functions loaded into it by the hypervisor test
program, and conveniently, loaded at the same virtual addresses.
- Improve documentation:
- Add link to perf wiki's page.
- Cleanups
- Delete now unusdd perf-with-kcore.sh script.
- Remove unused machines__find_host().
ARM SPE (Statistical Profile Extensions):
- Add man page entry.
Vendor Events:
- Update various Intel event topics.
- Update various microarch events.
- Fix various cstate metrics.
- Fix Alderlake metric groups.
- Add sapphirerapids events.
- Add JSON files for ARM Cortex A34, A35, A55, A510, A65, A73, A75, A77, A78,
A710, X1, X2 and Neoverse E1.
- Update Cortex A57/A72.
perf stat:
- Introduce stats for the user and system rusage times.
perf c2c:
- Prep work to support ARM systems.
perf annotate:
- Add --percent-limit option
perf lock:
- Add -t/--thread option for report.
- Do not discard broken lock stats.
perf bench:
Add breakpoint benchmarks.
perf test:
- Limit to only run executable scripts in tests.
- Add basic perf record tests.
- Add stat record+report test.
- Add basic stat and topdown group test.
- Skip several tests when the user hasn't permission to perform them.
- Fix test case 81 ("perf record tests") on s390x.
perf version:
- debuginfod support improvements.
perf scripting python:
- Expose symbol offset and source information.
perf build:
- Error for BPF skeletons without LIBBPF.
- Use Python devtools for version autodetection rather than runtime.
Miscellaneous:
- Add riscv64 support to 'perf jitdump'.
- Various fixes/tidy ups related to cpu_map.
- Fixes for handling Intel hybrid systems.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYow4VgAKCRCyPKLppCJ+
J9txAP9pWif22k+pwIgw2NHzaA/TLlGoatUQRvryX02fohj+RAD8DGrPXD33zgMb
QP9inIXOjQUPJrXomxVVskNdCCzolgo=
=B/vL
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.19-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"Intel PT:
- Allow hardware tracing on KVM test programs. In this case, the VM
is not running an OS, but only the functions loaded into it by the
hypervisor test program, and conveniently, loaded at the same
virtual addresses.
- Improve documentation:
- Add link to perf wiki's page
- Cleanups:
- Delete now unused perf-with-kcore.sh script
- Remove unused machines__find_host()
ARM SPE (Statistical Profile Extensions):
- Add man page entry.
Vendor Events:
- Update various Intel event topics
- Update various microarch events
- Fix various cstate metrics
- Fix Alderlake metric groups
- Add sapphirerapids events
- Add JSON files for ARM Cortex A34, A35, A55, A510, A65, A73, A75,
A77, A78, A710, X1, X2 and Neoverse E1
- Update Cortex A57/A72
perf stat:
- Introduce stats for the user and system rusage times
perf c2c:
- Prep work to support ARM systems
perf annotate:
- Add --percent-limit option
perf lock:
- Add -t/--thread option for report
- Do not discard broken lock stats
perf bench:
- Add breakpoint benchmarks
perf test:
- Limit to only run executable scripts in tests
- Add basic perf record tests
- Add stat record+report test
- Add basic stat and topdown group test
- Skip several tests when the user hasn't permission to perform them
- Fix test case 81 ("perf record tests") on s390x
perf version:
- debuginfod support improvements
perf scripting python:
- Expose symbol offset and source information
perf build:
- Error for BPF skeletons without LIBBPF
- Use Python devtools for version autodetection rather than runtime
Miscellaneous:
- Add riscv64 support to 'perf jitdump'
- Various fixes/tidy ups related to cpu_map
- Fixes for handling Intel hybrid systems"
* tag 'perf-tools-for-v5.19-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (122 commits)
perf intel-pt: Add guest_code support
perf kvm report: Add guest_code support
perf script: Add guest_code support
perf tools: Add guest_code support
perf tools: Factor out thread__set_guest_comm()
perf tools: Add machine to machines back pointer
perf vendors events arm64: Update Cortex A57/A72
perf vendors events arm64: Arm Neoverse E1
perf vendors events arm64: Arm Cortex-X2
perf vendors events arm64: Arm Cortex-X1
perf vendors events arm64: Arm Cortex-A710
perf vendors events arm64: Arm Cortex-A78
perf vendors events arm64: Arm Cortex-A77
perf vendors events arm64: Arm Cortex-A75
perf vendors events arm64: Arm Cortex-A73
perf vendors events arm64: Arm Cortex-A65
perf vendors events arm64: Arm Cortex-A510
perf vendors events arm64: Arm Cortex-A55
perf vendors events arm64: Arm Cortex-A35
perf vendors events arm64: Arm Cortex-A34
...
A handful of functions unused functions were enabled during XIP builds,
which themselves didn't build correctly. This just disables the
functions entirely.
Fixes: e8a62cc26d ("riscv: Implement sv48 support")
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220420184056.7886-5-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This was broken by the original refactoring (as the XIP definitions
depend on <asm/pgtable.h>) and then more broken by the merge (as I
accidentally took the old version). This fixes both breakages, while
also pulling this out of <asm/asm.h> to avoid polluting most assembly
files with the XIP fixups.
Fixes: bee7fbc385 ("RISC-V CPU Idle Support")
Fixes: 63b13e64a8 ("RISC-V: Add arch functions for non-retentive suspend entry/exit")
Link: https://lore.kernel.org/r/20220420184056.7886-4-palmer@rivosinc.com
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Hi Linus,
Please, pull the following patch that adds new alloc functions to alloc
with multiplies check.
kvmalloc() and kvzalloc() functions have now 2-factor multiplication
argument forms kvmalloc_array() and kvcalloc().
Add alloc-with-multiplies checks for these new functions.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=SMOU
-----END PGP SIGNATURE-----
Merge tag 'checkpatch-new-alloc-check-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull checkpatch update from Gustavo Silva:
"kvmalloc() and kvzalloc() functions have now 2-factor multiplication
argument forms kvmalloc_array() and kvcalloc().
Add alloc-with-multiplies checks for these new functions"
* tag 'checkpatch-new-alloc-check-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
checkpatch: add new alloc functions to alloc with multiplies check
The direct trampoline and graph coexistence test sets global_ops to
trace only 'trace_selftest_dynamic_test_func', but does not reset it
after the test is completed, resulting in the function filter being set
already after the system starts. Although it can be reset through the
tracefs interface, it is more or less confusing to the user, and we
should reset it to trace all functions after the trampoline/graph test
completes.
Link: https://lkml.kernel.org/r/20220427034119.24668-1-lihuafei1@huawei.com
Link: https://lore.kernel.org/all/20220418073958.104029-1-lihuafei1@huawei.com/
Fixes: 130c080658 ("tracing: Add trampoline/graph selftest")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The print fmt check against trace events to make sure that the format does
not use pointers that may be freed from the time of the trace to the time
the event is read, gives a false positive on %pISpc when reading data that
was saved in __get_dynamic_array() when it is perfectly fine to do so, as
the data being read is on the ring buffer.
Link: https://lore.kernel.org/all/20220407144524.2a592ed6@canb.auug.org.au/
Cc: stable@vger.kernel.org
Fixes: 5013f454a3 ("tracing: Add check of trace event print fmts for dereferencing pointers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Hi Linus,
Please, pull the following hardening changes that I've been collecting
in my tree during the last development cycle. All of them have been
baking in linux-next.
Replace open-coded instances with size_t saturating arithmetic helpers:
- virt: acrn: Prefer array_size and struct_size over open coded arithmetic (Len Baker)
- afs: Prefer struct_size over open coded arithmetic (Len Baker)
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmKNUvYACgkQRwW0y0cG
2zGm1g//YZYWBEzqOncd1K4/TBzbMytxE7oQYqUiS4e3V5D1eiT8924BLr7iuWMd
c64Lv0trjyHCjdqBxGLMz5cv5EZd206xS3bqIQ8gqcKHOK/z7ob/c7YJxdUcXaWK
oyGY65Arg9XnuRIJvNeiwdJNpPGsSyI8BSRC6gf6NFYke/GNIgv3rxmVBSbH8V7W
QVBWf3AWR8+ZlXJFHWEfIAMRwFtumAhak3ZpN/4SDWM6cw3PIm1TFEO5Jx/rWaNn
LZth+91uJU6UeSrhrME/QQ9Q1kgmLUMqzW3U/HpMky7Ugi0ffWIHc83XYDOgrFRJ
Br5KLL4c5SHMJfPXqHMsbRNG/bI6fJfd2A0vUDIQMdy4kX88MAzTsUzSiGe6gAAc
a3RQV4qUkBvC53glZm4pb0IGY4j3vO1tf6Hd9BdxH4knpfQzVNTAwHXUxDq8kDBu
Bir3B60qAktszxdp/QukmfoTRpVPSV732TMgIllVPFtFD/KYCiYFhSILPouh5JWJ
3TP8ND1hKrV3P9FVirlJxdFLcADu8dyrmwxKdxZVa6ek9xtr0gt111FYcTeZG+eS
PaJ7N8G+OkvYktv14/+0DBgIQdeHQ/kp6D4eTjQZ6y0k0b7uAI3HRv7fxWh8eyOw
RmaE8jQCHokUnerouBUIGEwAmyFhN3atogqIHczB4ebBNbEeOGg=
=22O8
-----END PGP SIGNATURE-----
Merge tag 'size_t-saturating-helpers-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull misc hardening updates from Gustavo Silva:
"Replace a few open-coded instances with size_t saturating arithmetic
helpers"
* tag 'size_t-saturating-helpers-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
virt: acrn: Prefer array_size and struct_size over open coded arithmetic
afs: Prefer struct_size over open coded arithmetic
Hi Linus,
Please, pull the following patches that fix some -Wstringop-overflow
warnings when building with GCC-11. All the patches have been in
linux-next during the last development cycle.
This is part of the ongoing efforts to globally enable
-Wstringop-overflow.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=9lLb
-----END PGP SIGNATURE-----
Merge tag 'Wstringop-overflow-fixes-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull Wstringop-overflow fixes from Gustavo Silva:
"Fix some -Wstringop-overflow warnings when building with GCC-11. All
the patches have been in linux-next during the last development cycle.
This is part of the ongoing efforts to globally enable
-Wstringop-overflow"
* tag 'Wstringop-overflow-fixes-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
drm/i915: Fix -Wstringop-overflow warning in call to intel_read_wm_latency()
drm/amd/display: Fix Wstringop-overflow warnings in dc_link_dp.c
scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()
In __sanitizer_cov_trace_pc(), previously we write pc before updating pos.
However, some early interrupt code could bypass check_kcov_mode() check
and invoke __sanitizer_cov_trace_pc(). If such interrupt is raised
between writing pc and updating pos, the pc could be overitten by the
recursive __sanitizer_cov_trace_pc().
As suggested by Dmitry, we cold update pos before writing pc to avoid such
interleaving.
Apply the same change to write_comp_data().
Link: https://lkml.kernel.org/r/20220523053531.1572793-1-liu3101@purdue.edu
Signed-off-by: Congyu Liu <liu3101@purdue.edu>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The following function is the only place that checks USER_LOCK_ATTACHED.
This flag is set when lock request is granted through user_ast() and only
the following function will clear it.
Checking of this flag here is to make sure ocfs2_dlm_unlock is not issued
if this lock is never granted. For example, lock file is created and then
get removed, open file never happens.
Clearing the flag here is not necessary because this is the only function
that checks it, if another flow is executing user_dlm_destroy_lock(), it
will bail out at the beginning because of USER_LOCK_IN_TEARDOWN and never
check USER_LOCK_ATTACHED. Drop the clear, so we don't need take care of
it for the following error handling patch.
int user_dlm_destroy_lock(struct user_lock_res *lockres)
{
...
status = 0;
if (!(lockres->l_flags & USER_LOCK_ATTACHED)) {
spin_unlock(&lockres->l_lock);
goto bail;
}
lockres->l_flags &= ~USER_LOCK_ATTACHED;
lockres->l_flags |= USER_LOCK_BUSY;
spin_unlock(&lockres->l_lock);
status = ocfs2_dlm_unlock(conn, &lockres->l_lksb, DLM_LKF_VALBLK);
if (status) {
user_log_dlm_error("ocfs2_dlm_unlock", status, lockres);
goto bail;
}
...
}
V1 discussion with Joseph:
https://lore.kernel.org/all/7b620c53-0c45-da2c-829e-26195cbe7d4e@linux.alibaba.com/T/
Link: https://lkml.kernel.org/r/20220518235224.87100-1-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
Pull workqueue update from Tejun Heo:
"A lone commit fixing CPU offline handling for per-cpu wq workers so
that they don't bother isolated CPUs"
* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs
Pull cgroup updates from Tejun Heo:
"Nothing too interesting. This adds cpu controller selftests and there
are a couple code cleanup patches"
* 'for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: remove the superfluous judgment
cgroup: Make cgroup_debug static
kseltest/cgroup: Make test_stress.sh work if run interactively
kselftest/cgroup: fix test_stress.sh to use OUTPUT dir
cgroup: Add config file to cgroup selftest suite
cgroup: Add test_cpucg_max_nested() testcase
cgroup: Add test_cpucg_max() testcase
cgroup: Add test_cpucg_nested_weight_underprovisioned() testcase
cgroup: Adding test_cpucg_nested_weight_overprovisioned() testcase
cgroup: Add test_cpucg_weight_underprovisioned() testcase
cgroup: Add test_cpucg_weight_overprovisioned() testcase
cgroup: Add test_cpucg_stats() testcase to cgroup cpu selftests
cgroup: Add new test_cpu.c test suite in cgroup selftests
Xiubo has graciously volunteered to take over for me as the Linux cephfs
client maintainer. Make it official by changing myself to be a
"Reviewer" for libceph and ceph.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The cephfs kernel client started to show the message:
ceph: mds0 session blocklisted
when mounting a filesystem. This is due to the fact that the session
messages are being incorrectly decoded: the skip needs to take into
account the 'len'.
While there, fixed some whitespaces too.
Cc: stable@vger.kernel.org
Fixes: e1c9788cb3 ("ceph: don't rely on error_string to validate blocklisted session.")
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the task is placed in the TASK_INTERRUPTIBLE state it will sleep
until either something explicitly wakes it up, or a non-masked signal
is received. Switch to TASK_KILLABLE to avoid the noises.
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Variable ino is being assigned a value that is never read. The variable
and assignment are redundant, remove it.
Cleans up clang scan build warning:
warning: Although the value stored to 'ino' is used in the enclosing
expression, the value is never actually read from 'ino'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the pagecaches writeback just finished and the i_wrbuffer_ref
reaches zero it will try to trigger ceph_check_caps(). But if just
before ceph_check_caps() the i_wrbuffer_ref could be increased
again by mmap/cache write, then the Fwb revoke will fail.
We need to try to queue a writeback in this case instead of
triggering the writeback by BDI's delayed work per 5 seconds.
URL: https://tracker.ceph.com/issues/46904
URL: https://tracker.ceph.com/issues/55377
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When doing a mount using as base a directory that has 'max_bytes' quotas
statfs uses that value as the total; if a subdirectory is used instead,
the same 'max_bytes' too in statfs, unless there is another quota set.
Unfortunately, if this subdirectory only has the 'max_files' quota set,
then statfs uses the filesystem total. Fix this by making sure we only
lookup realms that contain the 'max_bytes' quota.
Cc: Ryan Taylor <rptaylor@uvic.ca>
URL: https://tracker.ceph.com/issues/55090
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
1, mount with wsync.
2, create a file with O_RDWR, and the request was sent to mds.0:
ceph_atomic_open()-->
ceph_mdsc_do_request(openc)
finish_open(file, dentry, ceph_open)-->
ceph_open()-->
ceph_init_file()-->
ceph_init_file_info()-->
ceph_uninline_data()-->
{
...
if (inline_version == 1 || /* initial version, no data */
inline_version == CEPH_INLINE_NONE)
goto out_unlock;
...
}
The inline_version will be 1, which is the initial version for the
new create file. And here the ci->i_inline_version will keep with 1,
it's buggy.
3, buffer write to the file immediately:
ceph_write_iter()-->
ceph_get_caps(file, need=Fw, want=Fb, ...);
generic_perform_write()-->
a_ops->write_begin()-->
ceph_write_begin()-->
netfs_write_begin()-->
netfs_begin_read()-->
netfs_rreq_submit_slice()-->
netfs_read_from_server()-->
rreq->netfs_ops->issue_read()-->
ceph_netfs_issue_read()-->
{
...
if (ci->i_inline_version != CEPH_INLINE_NONE &&
ceph_netfs_issue_op_inline(subreq))
return;
...
}
ceph_put_cap_refs(ci, Fwb);
The ceph_netfs_issue_op_inline() will send a getattr(Fsr) request to
mds.1.
4, then the mds.1 will request the rd lock for CInode::filelock from
the auth mds.0, the mds.0 will do the CInode::filelock state transation
from excl --> sync, but it need to revoke the Fxwb caps back from the
clients.
While the kernel client has aleady held the Fwb caps and waiting for
the getattr(Fsr).
It's deadlock!
URL: https://tracker.ceph.com/issues/55377
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When run out of memories we should redirty the page before failing
the writepage. Or we will hit BUG_ON(folio_get_private(folio)) in
ceph_dirty_folio().
URL: https://tracker.ceph.com/issues/55421
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If any 'x' caps is issued we can just choose the auth MDS instead
of the random replica MDSes. Because only when the Locker is in
LOCK_EXEC state will the loner client could get the 'x' caps. And
if we send the getattr requests to any replica MDS it must auth pin
and tries to rdlock from the auth MDS, and then the auth MDS need
to do the Locker state transition to LOCK_SYNC. And after that the
lock state will change back.
This cost much when doing the Locker state transition and usually
will need to revoke caps from clients.
URL: https://tracker.ceph.com/issues/55240
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since CephFS makes no attempt to maintain atime, we shouldn't
try to update it in mmap and generic read cases and ignore updating
it in direct and sync read cases.
And even we update it in mmap and generic read cases we will drop
it and won't sync it to MDS. And we are seeing the atime will be
updated and then dropped to the floor again and again.
URL: https://lists.ceph.io/hyperkitty/list/ceph-users@ceph.io/thread/VSJM7T4CS5TDRFF6XFPIYMHP75K73PZ6/
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Before waiting for a request's safe reply, we will send the mdlog flush
request to the relevant MDS. And this will also flush the mdlog for all
the other unsafe requests in the same session, so we can record the last
session and no need to flush mdlog again in the next loop. But there
still have cases that it may send the mdlog flush requst twice or more,
but that should be not often.
Rename wait_unsafe_requests() to
flush_mdlog_and_wait_mdsc_unsafe_requests() to make it more
descriptive.
[xiubli: fold in MDS request refcount leak fix from Jeff]
URL: https://tracker.ceph.com/issues/55284
URL: https://tracker.ceph.com/issues/55411
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Rename it to flush_mdlog_and_wait_inode_unsafe_requests() to make
it more descriptive.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fix the following coccicheck warning:
net/ceph/crush/mapper.c:1077:8-9: WARNING opportunity for swap()
by using swap() for the swapping of variable values and drop
the tmp variable that is not needed any more.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
From the posix and the initial statx supporting commit comments,
the AT_STATX_DONT_SYNC is a lightweight stat and the
AT_STATX_FORCE_SYNC is a heaverweight one. And also checked all
the other current usage about these two flags they are all doing
the same, that is only when the AT_STATX_FORCE_SYNC is not set
and the AT_STATX_DONT_SYNC is set will they skip sync retriving
the attributes from storage.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fixes: 400e1286c0 ("ceph: conversion to new fscache API")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean.
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The MDS will always refresh the dentry lease when removing the files
or directories. And if the dentry is still hashed, we can update
the dentry lease and no need to do the lookup from the MDS later.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The type of 'r_attempts' in kernel 'ceph_mds_request' is 'int',
while in 'ceph_mds_request_head' the type of 'num_retry' is '__u8'.
So in case the request retries exceeding 256 times, the MDS will
receive a incorrect retry seq.
In this case it's ususally a bug in MDS and continue retrying the
request makes no sense. For now let's limit it to 256. In future
this could be fixed in ceph code, so avoid using the hardcode here.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The type of 'num_fwd' in ceph 'MClientRequestForward' is 'int32_t',
while in 'ceph_mds_request_head' the type is '__u8'. So in case
the request bounces between MDSes exceeding 256 times, the client
will get stuck.
In this case it's ususally a bug in MDS and continue bouncing the
request makes no sense.
URL: https://tracker.ceph.com/issues/55130
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Luís Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The ceph_mdsc_lease_release() has been removed by commit 8aa152c778
(ceph: remove ceph_mdsc_lease_release). ceph_mdsc_lease_send_msg will
never be called with CEPH_MDS_LEASE_RELEASE.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean.
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
`rctime' has been a pain point in cephfs due to its buggy
nature - inconsistent values reported and those sorts.
Fixing rctime is non-trivial needing an overall redesign
of the entire nested statistics infrastructure.
As a workaround, PR
http://github.com/ceph/ceph/pull/37938
allows this extended attribute to be manually set. This allows
users to "fixup" inconsistent rctime values. While this sounds
messy, its probably the wisest approach allowing users/scripts
to workaround buggy rctime values.
The above PR enables Ceph MDS to allow manually setting
rctime extended attribute with the corresponding user-land
changes. We may as well allow the same to be done via kclient
for parity.
Signed-off-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This KUnit update for Linux 5.19-rc1 consists of several fixes, cleanups,
and enhancements to tests and framework:
- introduces _NULL and _NOT_NULL macros to pointer error checks
- reworks kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- adds ability to specify suite-level init and exit functions
-----BEGIN PGP SIGNATURE-----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=DzVQ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests and framework:
- introduce _NULL and _NOT_NULL macros to pointer error checks
- rework kunit_resource allocation policy to fix memory leaks when
caller doesn't specify free() function to be used when allocating
memory using kunit_add_resource() and kunit_alloc_resource() funcs.
- add ability to specify suite-level init and exit functions"
* tag 'linux-kselftest-kunit-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (41 commits)
kunit: tool: Use qemu-system-i386 for i386 runs
kunit: fix executor OOM error handling logic on non-UML
kunit: tool: update riscv QEMU config with new serial dependency
kcsan: test: use new suite_{init,exit} support
kunit: tool: Add list of all valid test configs on UML
kunit: take `kunit_assert` as `const`
kunit: tool: misc cleanups
kunit: tool: minor cosmetic cleanups in kunit_parser.py
kunit: tool: make parser stop overwriting status of suites w/ no_tests
kunit: tool: remove dead parse_crash_in_log() logic
kunit: tool: print clearer error message when there's no TAP output
kunit: tool: stop using a shell to run kernel under QEMU
kunit: tool: update test counts summary line format
kunit: bail out of test filtering logic quicker if OOM
lib/Kconfig.debug: change KUnit tests to default to KUNIT_ALL_TESTS
kunit: Rework kunit_resource allocation policy
kunit: fix debugfs code to use enum kunit_status, not bool
kfence: test: use new suite_{init/exit} support, add .kunitconfig
kunit: add ability to specify suite-level init and exit functions
kunit: rename print_subtest_{start,end} for clarity (s/subtest/suite)
...
This Kselftest update for Linux 5.19-rc1 consists of several fixes,
cleanups, and enhancements to tests:
- adds mips support for kprobe args string and syntax tests
- updates to resctrl test to use kselftest framework
- fixes, cleanups, and enhancements to tests
-----BEGIN PGP SIGNATURE-----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=MKRc
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Several fixes, cleanups, and enhancements to tests:
- add mips support for kprobe args string and syntax tests
- updates to resctrl test to use kselftest framework
- fixes, cleanups, and enhancements to tests"
* tag 'linux-kselftest-next-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftests/ir : Improve readability of modprobe error message
selftests/resctrl: Fix null pointer dereference on open failed
selftests/resctrl: Add missing SPDX license to Makefile
selftests/resctrl: Update README about using kselftest framework to build/run resctrl_tests
selftests/resctrl: Make resctrl_tests run using kselftest framework
selftests/resctrl: Fix resctrl_tests' return code to work with selftest framework
selftests/resctrl: Change the default limited time to 120 seconds
selftests/resctrl: Kill child process before parent process terminates if SIGTERM is received
selftests/resctrl: Print a message if the result of MBM&CMT tests is failed on Intel CPU
selftests/resctrl: Extend CPU vendor detection
selftests/x86/corrupt_xstate_header: Use provided __cpuid_count() macro
selftests/x86/amx: Use provided __cpuid_count() macro
selftests/vm/pkeys: Use provided __cpuid_count() macro
selftests: Provide local define of __cpuid_count()
selftests/damon: add damon to selftests root Makefile
selftests/binderfs: Improve message to provide more info
selftests: mqueue: drop duplicate min definition
selftests/ftrace: add mips support for kprobe args syntax tests
selftests/ftrace: add mips support for kprobe args string tests
- After a long period of inactivity, the Japanese translations are seeing
some much-needed maintenance and updating.
- Reworked IOMMU documentation
- Some new documentation for static-analysis tools
- A new overall structure for the memory-management documentation. This
is an LSFMM outcome that, it is hoped, will help encourage developers to
fill in the many gaps. Optimism is eternal...but hopefully it will
work.
- More Chinese translations.
Plus the usual typo fixes, updates, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmKLqZQPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YdgQH/2/9+EgQDes93f/+iKtbO23EV67392dwrmXS
kYg8lR4948/Q3jzgMloUo6hNOoxXeV/sqmdHu0LjUhFN+BGsp9fFjd/jp0XhWcqA
nnc9foGbpmeFPxHeAg2aqV84eeasLoO5lUUm2rNoPBLd6HFV+IYC5R4VZ+w42StB
5bYEOYwHXMvQZXkivZDse82YmvQK3/2rRGTUoFhME/Aap6rFgWJJ+XQcSKA7WmwW
OpJqq+FOsjsxHe6IFVy6onzlqgGJM8zM2bLtqedid6yaE3uACcHMb/OyAjp0rdKF
BQvaG+d3f7DugABqM6Y1oU75iBtJWWYgGeAm36JtX+3mz2uR/f0=
=3UoR
-----END PGP SIGNATURE-----
Merge tag 'docs-5.19' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It was a moderately busy cycle for documentation; highlights include:
- After a long period of inactivity, the Japanese translations are
seeing some much-needed maintenance and updating.
- Reworked IOMMU documentation
- Some new documentation for static-analysis tools
- A new overall structure for the memory-management documentation.
This is an LSFMM outcome that, it is hoped, will help encourage
developers to fill in the many gaps. Optimism is eternal...but
hopefully it will work.
- More Chinese translations.
Plus the usual typo fixes, updates, etc"
* tag 'docs-5.19' of git://git.lwn.net/linux: (70 commits)
docs: pdfdocs: Add space for chapter counts >= 100 in TOC
docs/zh_CN: Add dev-tools/gdb-kernel-debugging.rst Chinese translation
input: Docs: correct ntrig.rst typo
input: Docs: correct atarikbd.rst typos
MAINTAINERS: Become the docs/zh_CN maintainer
docs/zh_CN: fix devicetree usage-model translation
mm,doc: Add new documentation structure
Documentation: drop more IDE boot options and ide-cd.rst
Documentation/process: use scripts/get_maintainer.pl on patches
MAINTAINERS: Add entry for DOCUMENTATION/JAPANESE
docs/trans/ja_JP/howto: Don't mention specific kernel versions
docs/ja_JP/SubmittingPatches: Request summaries for commit references
docs/ja_JP/SubmittingPatches: Add Suggested-by as a standard signature
docs/ja_JP/SubmittingPatches: Randy has moved
docs/ja_JP/SubmittingPatches: Suggest the use of scripts/get_maintainer.pl
docs/ja_JP/SubmittingPatches: Update GregKH links
Documentation/sysctl: document max_rcu_stall_to_panic
Documentation: add missing angle bracket in cgroup-v2 doc
Documentation: dev-tools: use literal block instead of code-block
docs/zh_CN: add vm numa translation
...
Almost all other initialization of variables in f2fs_fill_super are
extraced to a single function. Also do it for write_io[], which can
make code more clean.
This patch just refactors the code, theres no functional change.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
[Jaegeuk Kim: clean up]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use PAGE_ALIGNED macro instead of IS_ALIGNED and passing PAGE_SIZE.
Link: https://lkml.kernel.org/r/20220520021833.121405-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The default "timeout" for one kselftest is 45 seconds, while some cases in
run_vmtests.sh require more time. This will cause testing timeout like:
not ok 4 selftests: vm: run_vmtests.sh # TIMEOUT 45 seconds
Therefore, add the "settings" file with timeout variable so users can set
the "timeout" value.
Link: https://lkml.kernel.org/r/20220521083825.319654-4-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The "test_hmm.sh" file used by run_vmtests.sh dose not be installed into
INSTALL_PATH. Thus run_vmtests.sh can not call it in INSTALL_PATH:
---------------------------
running ./test_hmm.sh smoke
---------------------------
./run_vmtests.sh: line 74: ./test_hmm.sh: No such file or directory
[FAIL]
-----------------------
Add "test_hmm.sh" to TEST_FILES so that it will be installed.
Link: https://lkml.kernel.org/r/20220521083825.319654-3-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests: vm: a few fixup patches".
This series contains three fixup patches for vm selftests. They are
independent. Please see the patches.
This patch (of 3):
Currently, ksm_tests operates "merge_across_nodes" with NUMA either
enabled or disabled. In a system with NUMA disabled, these operations
will fail and output a misleading report given "merge_across_nodes" does
not exist in sysfs:
----------------------------
running ./ksm_tests -M -p 10
----------------------------
f /sys/kernel/mm/ksm/merge_across_nodes
fopen: No such file or directory
Cannot save default tunables
[FAIL]
----------------------
So check numa_available() before those operations to skip them if NUMA is
disabled.
Link: https://lkml.kernel.org/r/20220521083825.319654-1-patrick.wang.shcn@gmail.com
Link: https://lkml.kernel.org/r/20220521083825.319654-2-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Spelling mistake (triple letters) in comment. Detected with the help of
Coccinelle.
Link: https://lkml.kernel.org/r/20220521111145.81697-80-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Spelling mistake (triple letters) in comment. Detected with the help of
Coccinelle.
Link: https://lkml.kernel.org/r/20220521111145.81697-94-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce process_mrelease syscall sanity tests which include tests
which expect to fail:
- process_mrelease with invalid pidfd and flags inputs
- process_mrelease on a live process with no pending signals
and valid process_mrelease usage which is expected to succeed. Because
process_mrelease has to be used against a process with a pending SIGKILL,
it's possible that the process exits before process_mrelease gets called.
In such cases we retry the test with a victim that allocates twice more
memory up to 1GB. This would require the victim process to spend more
time during exit and process_mrelease has a better chance of catching the
process before it exits and succeeding.
On success the test reports the amount of memory the child had to allocate
for reaping to succeed. Sample output:
$ mrelease_test
Success reaping a child with 1MB of memory allocations
On failure the test reports the failure. Sample outputs:
$ mrelease_test
All process_mrelease attempts failed!
$ mrelease_test
process_mrelease: Invalid argument
Link: https://lkml.kernel.org/r/20220518204316.13131-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds
Palmer Dabbelt
Li Huafei
Steven Rostedt (Google)
Congyu Liu
Junxiao Bi via Ocfs2-devel
Jeff Layton
Luís Henriques
Xiubo Li
Colin Ian King
Guo Zhengkui
Jakob Koschel
Venky Shankar
Yufen Yu
Kefeng Wang
Patrick Wang
Muhammad Usama Anjum
Julia Lawall
Suren Baghdasaryan