Taehee Yoo says:
====================
amt: fix several bugs in gateway mode
This patchset fixes bugs in amt module.
First patch fixes amt gateway mode's status stuck.
amt gateway and relay established so these two mode manage status.
But gateway stuck to change its own status if a relay doesn't send
responses.
Second patch fixes a memory leak.
amt gateway skips some handling of advertisement message.
So, a memory leak would occur.
====================
Link: https://lore.kernel.org/r/20220519031555.3192-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a gateway receives an advertisement message, it extracts relay
information and then it should be freed.
But the advertisement handler doesn't free it.
So, memory leak would occur.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a gateway can not receive any response to requests from a relay,
gateway resets status from SENT_REQUEST to INIT and variable about a
relay as well. And then it should start the full establish step
from sending a discovery message and receiving advertisement message.
But, after failure in amt_req_work() it continues sending a request
message step with flushed(invalid) relay information and sets SENT_REQUEST.
So, a gateway can't be established with a relay.
In order to avoid this situation, it stops sending the request message
step if it fails.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When user sets skb_defer_max to 1 the kick threshold is 0
(half of 1). If we increment queue length before the check
the kick will never happen, and the skb may get stranded.
This is likely harmless but can be avoided by moving the
increment after the check. This way skb_defer_max == 1
will always kick. Still a silly config to have, but
somehow that feels more correct.
While at it drop a comment which seems to be outdated
or confusing, and wrap the defer_count write with
a WRITE_ONCE() since it's read on the fast path
that avoids taking the lock.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220518185522.2038683-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the trampoline_count test doesn't include any fmod_ret bpf
programs, fix it to make the test cover all possible trampoline program
types.
Since fmod_ret bpf programs can't be attached to __set_task_comm function,
as it's neither whitelisted for error injection nor a security hook, change
it to bpf_modify_return_test.
This patch also does some other cleanups such as removing duplicate code,
dropping inconsistent comments, etc.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220519150610.601313-1-ytcoode@gmail.com
EEXIST didn't make sense to use when dfs_cache_find() couldn't find a
cache entry nor retrieve a referral target.
It also doesn't make sense cifs_dfs_query_info_nonascii_quirk() to
emulate ENOENT anymore.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Also return EOPNOTSUPP if path is remote but nodfs was set.
Fixes: a2809d0e16 ("cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs")
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mat Martineau says:
====================
This patch set adds BPF access to mptcp_sock structures, along with
associated self tests. You may recognize some of the code from earlier
(https://lore.kernel.org/bpf/20200918121046.190240-6-nicolas.rybowski@tessares.net/)
but it has been reworked quite a bit.
v1 -> v2: Emit BTF type, add func_id checks in verifier.c and bpf_trace.c,
remove build check for CONFIG_BPF_JIT, add selftest check for CONFIG_MPTCP,
and add a patch to include CONFIG_IKCONFIG/CONFIG_IKCONFIG_PROC for the
BPF self tests.
v2 -> v3: Access sysctl through the filesystem to work around CI use of
the more limited busybox sysctl command.
v3 -> v4: Dropped special case kernel code for tcp_sock is_mptcp, use
existing bpf_tcp_helpers.h, and add check for 'ip mptcp monitor' support.
v4 -> v5: Use BPF test skeleton, more consistent use of ASSERT macros,
drop some unnecessary parameters / checks, and use tracing to acquire
MPTCP token.
Geliang Tang (6):
bpf: add bpf_skc_to_mptcp_sock_proto
selftests/bpf: Enable CONFIG_IKCONFIG_PROC in config
selftests/bpf: test bpf_skc_to_mptcp_sock
selftests/bpf: verify token of struct mptcp_sock
selftests/bpf: verify ca_name of struct mptcp_sock
selftests/bpf: verify first of struct mptcp_sock
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This patch verifies the struct member token of struct mptcp_sock. Add a
new member token in struct mptcp_storage to store the token value of the
msk socket got by bpf_skc_to_mptcp_sock(). Trace the kernel function
mptcp_pm_new_connection() by using bpf fentry prog to obtain the msk token
and save it in a global bpf variable. Pass the variable to verify_msk() to
verify it with the token saved in socket_storage_map.
v4:
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- skip the test if 'ip mptcp monitor' is not supported (Mat)
v5:
- Drop 'ip mptcp monitor', trace mptcp_pm_new_connection instead (Martin)
- Use ASSERT_EQ (Andrii)
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-6-mathew.j.martineau@linux.intel.com
This patch extends the MPTCP test base, to test the new helper
bpf_skc_to_mptcp_sock().
Define struct mptcp_sock in bpf_tcp_helpers.h, use bpf_skc_to_mptcp_sock
to get the msk socket in progs/mptcp_sock.c and store the infos in
socket_storage_map.
Get the infos from socket_storage_map in prog_tests/mptcp.c. Add a new
function verify_msk() to verify the infos of MPTCP socket, and rename
verify_sk() to verify_tsk() to verify TCP socket only.
v2: Add CONFIG_MPTCP check for clearer error messages
v4:
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- drop bpf_mptcp_helpers.h (Andrii)
v5:
- some 'ASSERT_*' were replaced in the next commit by mistake.
- Drop CONFIG_MPTCP (Martin)
- Use ASSERT_EQ (Andrii)
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-5-mathew.j.martineau@linux.intel.com
This patch adds a base for MPTCP specific tests.
It is currently limited to the is_mptcp field in case of plain TCP
connection because there is no easy way to get the subflow sk from a msk
in userspace. This implies that we cannot lookup the sk_storage attached
to the subflow sk in the sockops program.
v4:
- add copyright 2022 (Andrii)
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- drop SEC("version") (Andrii)
- use is_mptcp in tcp_sock, instead of bpf_tcp_sock (Martin & Andrii)
v5:
- Drop connect_to_mptcp_fd (Martin)
- Use BPF test skeleton (Andrii)
- Use ASSERT_EQ (Andrii)
- Drop the 'msg' parameter of verify_sk
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-4-mathew.j.martineau@linux.intel.com
CONFIG_IKCONFIG_PROC is required by BPF selftests, otherwise we get
errors like this:
libbpf: failed to open system Kconfig
libbpf: failed to load object 'kprobe_multi'
libbpf: failed to load BPF skeleton 'kprobe_multi': -22
It's because /proc/config.gz is opened in bpf_object__read_kconfig_file()
in tools/lib/bpf/libbpf.c:
file = gzopen("/proc/config.gz", "r");
So this patch enables CONFIG_IKCONFIG and CONFIG_IKCONFIG_PROC in
tools/testing/selftests/bpf/config.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220519233016.105670-3-mathew.j.martineau@linux.intel.com
CXL memory expanders that support the CXL 2.0 memory device class code
include an "HDM Decoder Capability" mechanism to supplant the "CXL DVSEC
Range" mechanism originally defined in CXL 1.1. Both mechanisms depend
on a "mem_enable" bit being set in configuration space before either
mechanism activates. When the HDM Decoder Capability is enabled the CXL
DVSEC Range settings are ignored.
Previously, the cxl_mem driver was relying on platform-firmware to set
"mem_enable". That is an invalid assumption as there is no requirement
that platform-firmware sets the bit before the driver sees a device,
especially in hot-plug scenarios. Additionally, ACPI-platforms that
support CXL 2.0 devices also support the ACPI CEDT (CXL Early Discovery
Table). That table outlines the platform permissible address ranges for
CXL operation. So, there is a need for the driver to set "mem_enable",
and there is information available to determine the validity of the CXL
DVSEC Ranges.
Arrange for the driver to optionally enable the HDM Decoder Capability
if "mem_enable" was not set by platform firmware, or the CXL DVSEC Range
configuration was invalid. Be careful to only disable memory decode if
the kernel was the one to enable it. In other words, if CXL is backing
all of kernel memory at boot the device needs to maintain "mem_enable"
and "HDM Decoder enable" all the way up to handoff back to platform
firmware (e.g. ACPI S5 state entry may require CXL memory to stay
active).
Fixes: 560f785590 ("cxl/pci: Retrieve CXL DVSEC memory info")
Cc: Dan Carpenter <dan.carpenter@oracle.com>
[dan: fix early terminiation of range-allowed loop]
Cc: Ariel Sibley <ariel.sibley@microchip.com>
[ariel: Memory_size must be non-zero]
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/165307136375.2499769.861793697156744166.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Johan writes:
USB-serial updates for 5.19-rc1
Here are the USB-serial updates for 5.19-rc1, including:
- a workaround for pl2303 devices with unexpected bcdUSB
- a new modem device id
Included is also a printk clean up.
All but the modem-id commit have been in linux-next with no reported
issues.
* tag 'usb-serial-5.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
USB: serial: ftdi_sio: clean up printk format specifier
Norbert reported that it's possible to race sys_perf_event_open() such
that the looser ends up in another context from the group leader,
triggering many WARNs.
The move_group case checks for races against itself, but the
!move_group case doesn't, seemingly relying on the previous
group_leader->ctx == ctx check. However, that check is racy due to not
holding any locks at that time.
Therefore, re-check the result after acquiring locks and bailing
if they no longer match.
Additionally, clarify the not_move_group case from the
move_group-vs-move_group race.
Fixes: f63a8daa58 ("perf: Fix event->ctx locking")
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull gpio fixes from Bartosz Golaszewski:
- fix bitops logic in gpio-vf610
- return an error if the user tries to use inverted polarity in
gpio-mvebu
* tag 'gpio-fixes-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mvebu/pwm: Refuse requests with inverted polarity
gpio: gpio-vf610: do not touch other bits when set the target bit
Pull MMC fix from Ulf Hansson:
"MMC core:
- Fix busy polling for MMC_SEND_OP_COND again"
* tag 'mmc-v5.18-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Fix busy polling for MMC_SEND_OP_COND again
Pull ceph fix from Ilya Dryomov:
"A fix for a nasty use-after-free, marked for stable"
* tag 'ceph-for-5.18-rc8' of https://github.com/ceph/ceph-client:
libceph: fix misleading ceph_osdc_cancel_request() comment
libceph: fix potential use-after-free on linger ping and resends
Pull RISC-V fixes from Palmer Dabbelt:
- fix the fu540-c000 device tree to avoid a schema check failure on the
DMA node name
- fix typo in the PolarFire SOC device tree
* tag 'riscv-for-linus-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: microchip: fix gpio1 reg property typo
riscv: dts: sifive: fu540-c000: align dma node name with dtschema
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes for -rc8/final.
The MTE and stolen time fixes have been doing the rounds for a little
while, but review and testing feedback was ongoing until earlier this
week. The kexec fix showed up on Monday and addresses a failure
observed under Qemu.
Summary:
- Add missing write barrier to publish MTE tags before a pte update
- Fix kexec relocation clobbering its own data structures
- Fix stolen time crash if a timer IRQ fires during CPU hotplug"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Ensure the cleared tags are visible before setting the PTE
arm64: kexec: load from kimage prior to clobbering
arm64: paravirt: Use RCU read locks to guard stolen_time
Several of the manuals for devices supported by this driver describes
the need for a minimum wait time before the chip is ready to receive
next command.
This wait time is already implemented in the driver as a ltc_wait_ready
function with a driver defined wait time of 100 ms, and is considered
for specific devices before reading/writing data on the pmbus.
Since this driver uses the default pmbus_regulator_ops for the enable/
disable/is_enabled functions we should add a driver specific callback
for write_byte_data to prevent bypassing the wait time recommendations
for the following devices: ltc3880/ltc3882/ltc3883/ltc3884/ltc3886/
ltc3887/ltc3889/ltm4664/ltm4675/ltm4676/ltm4677/ltm4678/ltm4680/ltm4686/
ltm4700/ltc7880.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20220428144039.2464667-4-marten.lindahl@axis.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some of the pmbus core functions uses pmbus_read_byte_data, which does
not support driver callbacks for chip specific write operations. This
could potentially influence some specific regulator chips that for
example need a time delay before each data access.
Lets use _pmbus_read_byte_data with callback check.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20220428144039.2464667-3-marten.lindahl@axis.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some of the pmbus core functions uses pmbus_write_byte_data, which does
not support driver callbacks for chip specific write operations. This
could potentially influence some specific regulator chips that for
example need a time delay before each data access.
Lets add support for driver callback with _pmbus_write_byte_data.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
Link: https://lore.kernel.org/r/20220428144039.2464667-2-marten.lindahl@axis.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
We need to keep some more information about the current board than just
the sensors set, and with more boards to add the dmi id array grows
quickly. Our probe code is always the same so let's switch to a custom
test code and a custom board info array. That allows us to omit board
vendor string (ASUS uses two strings that differ in case) in the board
info and use case-insensitive comparison, and also do not duplicate
sensor definitions for such board variants as " (WI-FI)" when sensors
are identical to the base variant.
Also saves a quarter of the module size by replacing big dmi_system_id
structs with smaller ones.
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220427143001.1443605-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Instead of registering the hwmon device at probe time, use the
existing "occ_active" sysfs file to control when the driver polls
the OCC for sensor data and registers with hwmon. The reason for
this change is that the SBE, which is the device by which the
driver communicates with the OCC, cannot handle communications
during certain system state transitions, resulting in
unrecoverable system errors.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220427140443.11428-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This replaces the nct6775_data->{read,write}_value function pointers
with a regmap.
The major difference is that the regmap access functions may fail, and
hence require checking at each call site. While the existing WMI
register-access code had potential failure paths, they were masked by
the fact that the read_value() function returned the register value
directly, and hence squashed errors undetectably by simply returning
zero, and while the write_value() functions were capable of reporting
errors, all callers ignored them.
This improves the robustness of the existing code, and also prepares
the driver for an i2c version to be added soon, for which register
accesses are much more likely to actually fail.
The conversion of the register-access call sites is largely mechanical
(reading a register now returns the value via an out-param pointer,
and returned errors must be checked for and propagated to callers),
though the nct6775_write_fan_div() function is refactored slightly to
avoid duplicating nearly identical (and now lengthier) code in each
switch case.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220427010154.29749-3-zev@bewilderbeest.net
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If a particular SMM call takes a very long time to execute,
the user might experience audio problems. Print a warning
if a particular SMM call took over 0.250 seconds to execute,
so the user can check whether or not possible audio problems
are caused by this driver.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220426213154.724708-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
