Pull more RISC-V updates from Palmer Dabbelt:
"This has a handful of new features:
- Support for CURRENT_STACK_POINTER, which enables some extra stack
debugging for HARDENED_USERCOPY.
- Support for the new SBI CPU idle extension, via cpuidle and suspend
drivers.
- Profiling has been enabled in the defconfigs.
but is mostly fixes and cleanups"
* tag 'riscv-for-linus-5.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: K210 defconfigs: Drop redundant MEMBARRIER=n
RISC-V: defconfig: Drop redundant SBI HVC and earlycon
Documentation: riscv: remove non-existent directory from table of contents
riscv: cpu.c: don't use kernel-doc markers for comments
RISC-V: Enable profiling by default
RISC-V: module: fix apply_r_riscv_rcv_branch_rela typo
RISC-V: Declare per cpu boot data as static
RISC-V: Fix a comment typo in riscv_of_parent_hartid()
riscv: Increase stack size under KASAN
riscv: Fix fill_callchain return value
riscv: dts: canaan: Fix SPI3 bus width
riscv: Rename "sp_in_global" to "current_stack_pointer"
riscv module: remove (NOLOAD)
RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine
dt-bindings: Add common bindings for ARM and RISC-V idle states
cpuidle: Add RISC-V SBI CPU idle driver
cpuidle: Factor-out power domain related code from PSCI domain driver
RISC-V: Add SBI HSM suspend related defines
RISC-V: Add arch functions for non-retentive suspend entry/exit
RISC-V: Rename relocate() and make it global
...
This series adds RISC-V CPU Idle support using SBI HSM suspend function.
The RISC-V SBI CPU idle driver added by this series is highly inspired
from the ARM PSCI CPU idle driver.
Special thanks Sandeep Tripathy for providing early feeback on SBI HSM
support in all above projects (RISC-V SBI specification, OpenSBI, and
Linux RISC-V).
* palmer/riscv-idle:
RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine
dt-bindings: Add common bindings for ARM and RISC-V idle states
cpuidle: Add RISC-V SBI CPU idle driver
cpuidle: Factor-out power domain related code from PSCI domain driver
RISC-V: Add SBI HSM suspend related defines
RISC-V: Add arch functions for non-retentive suspend entry/exit
RISC-V: Rename relocate() and make it global
RISC-V: Enable CPU_IDLE drivers
Pull clk updates from Stephen Boyd:
"There's one large change in the core clk framework here. We change how
clk_set_rate_range() works so that the frequency is re-evaulated each
time the rate is changed. Previously we wouldn't let clk providers see
a rate that was different if it was still within the range, which
could be bad for power if the clk could run slower when a range
expands. Now the clk provider can decide to do something differently
when the constraints change. This broke Nvidia's clk driver so we had
to wait for the fix for that to bake a little more in -next.
The rate range patch series also introduced a kunit suite for the clk
framework that we're going to extend in the next release. It already
made it easy to find corner cases in the rate range patches so I'm
excited to see it cover more clk code and increase our confidence in
core framework patches in the future. I also added a kunit test for
the basic clk gate code and that work will continue to cover more
basic clk types: muxes, dividers, etc.
Beyond the core code we have the usual set of clk driver updates and
additions. Qualcomm again dominates the diffstat here with lots more
SoCs being supported and i.MX follows afer that with a similar number
of SoCs gaining clk drivers. Beyond those large additions there's
drivers being modernized to use clk_parent_data so we can move away
from global string names for all the clks in an SoC. Finally there's
lots of little fixes all over the clk drivers for typos, warnings, and
missing clks that aren't critical and get batched up waiting for the
next merge window to open. Nothing super big stands out in the driver
pile. Full details are below.
Core:
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
New Drivers:
- i.MXRT1050 clock driver and bindings
- i.MX8DXL clock driver and bindings
- i.MX93 clock driver and bindings
- NCO blocks on Apple SoCs
- Audio clks on StarFive JH7100 RISC-V SoC
- Add support for the new Renesas RZ/V2L SoC
- Qualcomm SDX65 A7 PLL
- Qualcomm SM6350 GPU clks
- Qualcomm SM6125, SM6350, QCS2290 display clks
- Qualcomm MSM8226 multimedia clks
Updates:
- Kunit tests for clk-gate implementation
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
- Mark mux table as const in clk-mux
- Make the all_lists array const
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding
and add support for dynamic mode
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks
on Renesas R-Car S4-8
- Improve the clocks for the Rockchip rk3568 display outputs
(parenting, pll-rates)
- Use of_device_get_match_data() instead of open-coding on Rockchip
rk3568
- Reintroduce the expected fractional-divider behaviour that
disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
- Remove SYS PLL 1/2 clock gates for i.MX8M*
- Remove AUDIO MCLK ROOT from i.MX7D
- Add fracn gppll clock type used by i.MX93
- Add new composite clock for i.MX93
- Add missing media mipi phy ref clock for i.MX8MP
- Fix off by one in imx_lpcg_parse_clks_from_dt()
- Rework for the imx pll14xx
- sama7g5: One low priority fix for GCLK of PDMC
- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Qualcomm SC8280XP RPMCC
- Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
- Rework Qualcomm GCC bindings and convert SDM845 camera bindig to
YAML
- Convert various Qualcomm drivers to use clk_parent_data
- Remove test clocks from various Qualcomm drivers
- Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
- Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
- Better pixel clk frequency support on Qualcomm RCG2 clks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
clk: zynq: Update the parameters to zynq_clk_register_periph_clk
clk: zynq: trivial warning fix
clk: Drop the rate range on clk_put()
clk: test: Test clk_set_rate_range on orphan mux
clk: Initialize orphan req_rate
dt-bindings: clock: drop useless consumer example
dt-bindings: clock: renesas: Make example 'clocks' parsable
clk: qcom: gcc-msm8994: Fix gpll4 width
dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
clk: rs9: Add Renesas 9-series PCIe clock generator driver
clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
clk: visconti: prevent array overflow in visconti_clk_register_gates()
dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
clk: sifive: Move all stuff into SoCs header files from C files
clk: sifive: Add SoCs prefix in each SoCs-dependent data
riscv: dts: Change the macro name of prci in each device node
dt-bindings: change the macro name of prci in header files and example
clk: sifive: duplicate the macro definitions for the time being
clk: qcom: sm6125-gcc: fix typos in comments
clk: ti: clkctrl: fix typos in comments
...
Pull devicetree updates from Rob Herring:
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
much needed help.
- DT schema validation now takes DTB files as input rather than
intermediate YAML files. This decouples the validation from the
source level syntax information. There's a bunch of schema fixes as a
result of switching to DTB based validation which exposed some errors
and incomplete schemas and examples.
- Kbuild improvements to explicitly warn users running 'make
dt_binding_check' on missing yamllint
- Expand DT_SCHEMA_FILES kbuild variable to take just a partial
filename or path instead of the full path to 1 file.
- Convert various bindings to schema format: mscc,vsc7514-switch,
multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
msm/mdp4, rda,8810pl-uart
- New schemas for u-boot environment variable partition, TI clksel
- New compatible strings for Renesas RZ/V2L SoC
- Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated
HiSilicon
- Add/fix schemas for QEMU Arm 'virt' machine
- Drop unused of_alias_get_alias_list() function
- Add a script to check DT unittest EXPECT message output. Pass
messages also now print by default at PR_INFO level to help test
automation.
* tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits)
dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable
dt-bindings: nvmem: add U-Boot environment variables binding
dt-bindings: ufs: qcom: Add SM6350 compatible string
dt-bindings: dmaengine: sifive,fu540-c000: include generic schema
dt-bindings: gpio: pca95xx: drop useless consumer example
Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs"
dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent'
dt-bindings: gnss: Add two more chips
dt-bindings: gnss: Rewrite sirfstar binding in YAML
dt-bindings: gnss: Modify u-blox to use common bindings
dt-bindings: gnss: Rewrite common bindings in YAML
dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible
dt-bindings: ata: ahci-platform: Add power-domains property
dt-bindings: ata: ahci-platform: Convert DT bindings to yaml
dt-bindings: kbuild: Use DTB files for validation
dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate
dt-bindings: Add QEMU virt machine compatible
dt-bindings: arm: Convert QEMU fw-cfg to DT schema
dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list
dt-bindings: i2c: convert i2c-at91 to json-schema
...
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
Pull arm64 updates from Will Deacon:
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
arm64: Add cavium_erratum_23154_cpus missing sentinel
perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
Documentation: vmcoreinfo: Fix htmldocs warning
kasan: fix a missing header include of static_keys.h
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
arm64: perf: Consistently make all event numbers as 16-bits
arm64: perf: Expose some Armv9 common events under sysfs
perf/marvell: cn10k DDR perf event core ownership
perf/marvell: cn10k DDR perfmon event overflow handling
perf/marvell: CN10k DDR performance monitor support
dt-bindings: perf: marvell: cn10k ddr performance monitor
arm64: clean up tools Makefile
perf/arm-cmn: Update watchpoint format
perf/arm-cmn: Hide XP PUB events for CMN-600
arm64: drop unused includes of <linux/personality.h>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
...
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a third set of fixes for the soc tree, well within the
expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge patch that
caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
sm8450, and Broadcom BCM2711"
* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
MAINTAINERS: Update Jisheng's email address
Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
dt-bindings: drm/bridge: anx7625: Revert DPI support
ARM: dts: aspeed: Fix AST2600 quad spi group
MAINTAINERS: update Krzysztof Kozlowski's email
MAINTAINERS: Update git tree for Broadcom iProc SoCs
ARM: tegra: Move Nyan FHD panels to AUX bus
arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
ARM: boot: dts: bcm2711: Fix HVS register range
arm64: dts: qcom: c630: disable crypto due to serror
arm64: dts: qcom: sm8450: fix apps_smmu interrupts
arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
arm64: dts: qcom: sm8350: Correct UFS symbol clocks
arm64: tegra: Disable ISO SMMU for Tegra194
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
The RISC-V CPU idle states will be described in under the
/cpus/idle-states DT node in the same way as ARM CPU idle
states.
This patch adds common bindings documentation for both ARM
and RISC-V idle states.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.18, please pull the following:
- Arinc defines the switch ports of the RTL8365MB switch on the Asus
RT-AC88U
- Richard provides cache information for the BCM2835/36/37 and BCM2711
SoCs such that tools like "lscpu -C" can report it when supported
- Stefan adds support for the Raspberry Pi Zero 2 W (wireless)
- Matthew defines the MAC address NVMEM cells for the Cisco Meraki
MX64/MX65 devices, he also fixes the LED for these platforms.
- Rafal adds the MAC addres NVMEM cell for the Luxul XWR-3150
* tag 'arm-soc/for-5.18/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Add Ethernet MAC address to Luxul XWR-3150
ARM: dts: NSP: MX6X: correct LED function types
ARM: dts: NSP: MX6X: get mac-address from eeprom
arm64: dts: broadcom: Add reference to RPi Zero 2 W
ARM: dts: Add Raspberry Pi Zero 2 W
dt-bindings: arm: bcm2835: Add Raspberry Pi Zero 2 W
ARM: dts: bcm2835/6: Add the missing L1/L2 cache information
ARM: dts: bcm2711: Add the missing L1/L2 cache information
ARM: dts: bcm2837: Add the missing L1/L2 cache information
ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
Link: https://lore.kernel.org/r/20220307194817.3754107-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for v5.18
This refactors the Qualcomm mdt file loader, to partially decouple it
from the SCM peripheral-authentication-service. This is needed as newer
platforms, such as the Qualcomm SM8450, require the metadata to remain
accessible to TrustZone during a longer time. This is followed by the
introduction of remoteproc drivers for SM8450 (Snapdragon 8 Gen 1).
It changes the way hardware version differences are handled in the LLCC
driver and introduces support for Qualcomm SM8450. While updating the dt
binding for LLCC it also introduces the missing SM8350 compatible.
The ocmem and aoss drivers gains missing put_device() calls and rpmpd
gains a missing check for kcalloc() failure.
The SPM driver is updated to avoid instantiating the SPM cpuidle devices
if the CPUs aren't controlled by SPM, such as when Snapdragon 8916
operates in 32-bit mode without PSCI.
The RPM power-domain driver gains MSM8226 support.
Lastly the socinfo driver gains knowledge about a few new SoCs and
PMICs.
* tag 'qcom-drivers-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (37 commits)
soc: qcom: rpmpd: Add MSM8226 support
dt-bindings: power: rpmpd: Add MSM8226 to rpmpd binding
soc: qcom: mdt_loader: Fix split-firmware condition
dt-bindings: arm: msm: Add LLCC compatible for SM8450
dt-bindings: arm: msm: Add LLCC compatible for SM8350
soc: qcom: llcc: Add configuration data for SM8450 SoC
soc: qcom: llcc: Update register offsets for newer LLCC HW
soc: qcom: llcc: Add missing llcc configuration data
soc: qcom: llcc: Add write-cache cacheable support
soc: qcom: llcc: Update the logic for version info extraction
soc: qcom: llcc: Add support for 16 ways of allocation
soc: qcom: socinfo: Add some more PMICs and SoCs
firmware: qcom: scm: Add support for MC boot address API
firmware: qcom: scm: Drop cpumask parameter from set_boot_addr()
firmware: qcom: scm: Simplify set_cold/warm_boot_addr()
cpuidle: qcom-spm: Check if any CPU is managed by SPM
remoteproc: qcom: pas: Add SM8450 remoteproc support
dt-bindings: remoteproc: qcom: pas: Add SM8450 PAS compatibles
remoteproc: qcom: pas: Carry PAS metadata context
soc: qcom: mdt_loader: Extract PAS operations
...
Link: https://lore.kernel.org/r/20220301042055.1804859-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add initial support for mt6582 and Prestigio PMT5008 3G tablet
- add basic support for Airoha EN7523
* tag 'v5.17-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: dts: add GPIO support for Airoha EN7523
ARM: Add basic support for Airoha EN7523 SoC
dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
dt-bindings: Add vendor prefix for Airoha
dt-bindings: mediatek: Adds a DT binding documentation for the MT6582 SoC
ARM: dts: Add initial support for Prestigio PMT5008 3G tablet
ARM: dts: Add initial support for Mediatek mt6582
Link: https://lore.kernel.org/r/3974dc7e-4185-4d88-ab5b-031a7d24214d@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 DeviceTree updates for v5.18
New platforms: Snapdragon 625 and Snapdragon 632
New boards: Google Herobrine R1, Fairphone FP3, SHIFT6mq, Samsung Galaxy
Book2 and Snapdragon 8 Gen 1 Hardware Development Kit (HDK)
On IPQ6018 the USB reference period is corrected, GICv2m support is
enabled and the max-link-speed for PCIe is specified.
IPQ8074 adds description of GIVv2m and SMEM, and ensures that TrustZone
related memory is reserved from Linux.
On the Snapdragon 7c Gen 3 (SC7280) description of display, displayport,
L3 interconnect, bluetooth, CPU opp-tables are added. Another revision
of the Google Herobrine is introduced and a bunch of cleanups are
introduced.
On Snapdragon 845 new support for the SHIFT6mq device is introduced, the
OnePlus devices gains fuel gauge and the platform gains GSI DMA support,
which is enabled for SPI (for now).
On the Snapdragon 850 based WindowsOnSnapdragon laptops, initial support
for Samsugn Galaxy Book2 is introduced and the Lenovo Yoga C630 gains
description of its backlight controls.
The Snapdragon 625 platform (MSM8953) the thereof derrived Snapdragon
632 platform is introduced, with initial description of the Fairphone 3.
Fairphone 4 on the SM7225 platform gains proper WLED configuration.
On Snapdragon 855 (SM8150) description of the limits hardware (LMh) is
introduced and the SPI and I2C devices are wired to the GSI DMA controller.
On Snapdragon 865 (SM8250) the CPU and cluster idle states are
introduced, the MSI interrupts for PCIe 1 and 2 are corrected and the
CPUfreq driver gains knowledge about thermal pressure interrupts.
On Snapdragon 8 Gen 1 (SM8450) LLCC, interconnect and remoteproc
descriptions are added. The SM8450 Hardware Development Kit is
introduced and the QRD has its remoteproc instances enabled.
Cluster idle and RPMh parameters are corrected on SM8150, SM8350 and
SM8540.
The IPA device on SC7180, SC7280 and SM8350 gains knowledge of the AOSS
QMP mailbox, allowing it to enable retention of IPA registers during
power collapse.
DeviceTree validation issues related to thermal zone naming, missing
CPU, device and platform compatibles, APR, Google EC PWM, DB410c sound,
QCS404 opp-tables and SM8250 PCIe nodes are corrected.
A bunch of cleanups and style fixes for MSM8992, MSM8994, MSM8996 and
MSM8916 are introduced as well.
* tag 'qcom-arm64-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (96 commits)
arm64: dts: qcom: sdm632: Add device tree for Fairphone 3
dt-bindings: arm: qcom: Document sdm632 and fairphone,fp3 board
arm64: dts: qcom: Add SDM632 device tree
arm64: dts: qcom: Add PM8953 PMIC
arm64: dts: qcom: Add MSM8953 device tree
dt-bindings: arm: cpus: Add Kryo 250 CPUs
arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor
arm64: dts: qcom: align Google CROS EC PWM node name with dtschema
arm64: dts: qcom: Add support for Samsung Galaxy Book2
arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1
arm64: dts: qcom: msm8996: add cxo and sleep-clk to gcc node
arm64: dts: qcom: sdm845: add bi_tcxo to camcc
arm64: dts: qcom: sdm845: enable dma for spi
arm64: dts: qcom: sdm845: Add gsi dma node
arm64: dts: qcom: sc7280: Add cpu OPP tables
arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider
arm64: dts: qcom: sm8450: Add LLCC/system-cache-controller node
arm64: dts: qcom: ipq6018: drop the clock-frequency property
arm64: dts: qcom: ipq8074: drop the clock-frequency property
arm64: dts: qcom: sm8450: add interconnect nodes
...
Link: https://lore.kernel.org/r/20220301053929.1809684-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm DeviceTree fixes for v5.17
The SDX65 platform and MTP device was added twice to the DT binding,
this drops one of the occurances.
* tag 'qcom-dts-fixes-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
Link: https://lore.kernel.org/r/20220301033838.1801689-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The AM62 SoC family is the follow on AM335x built on K3 Multicore SoC
architecture platform, providing ultra-low-power modes, dual display,
multi-sensor edge compute, security and other BOM-saving integration.
The AM62 SoC targets broad market to enable applications such as
Industrial HMI, PLC/CNC/Robot control, Medical Equipment, Building
Automation, Appliances and more.
Some highlights of this SoC are:
* Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster.
Pin-to-pin compatible options for single and quad core are available.
* Cortex-M4F for general-purpose or safety usage.
* Dual display support, providing 24-bit RBG parallel interface and
OLDI/LVDS-4 Lane x2, up to 200MHz pixel clock support for 2K display
resolution.
* Selectable GPUsupport, up to 8GFLOPS, providing better user experience
in 3D graphic display case and Android.
* PRU(Programmable Realtime Unit) support for customized programmable
interfaces/IOs.
* Integrated Giga-bit Ethernet switch supporting up to a total of two
external ports (TSN capable).
* 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3x eMMC and SD, GPMC for
NAND/FPGA connection, OSPI memory controller, 3xMcASP for audio,
1x CSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other peripherals.
* Dedicated Centralized System Controller for Security, Power, and
Resource Management.
* Multiple low power modes support, ex: Deep sleep,Standby, MCU-only,
enabling battery powered system design.
AM625 is the first device of the family. Add DT bindings for the same.
More details can be found in the Technical Reference Manual:
https://www.ti.com/lit/pdf/spruiv7
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20220225120239.1303821-3-vigneshr@ti.com
STM32 DT for v5.18, round 1
Highlights:
----------
-MCU:
-Fix W=1 warnings for timers (duplicate unit-address) for F4 and F7 series.
-Enable DMA2D on f469 disco.
- MPU:
-General:
- Add new board support: emSBS-Argon.
- Add dma configuration for all U(S)ART nodes and disable them in board files
when they are not needed in stm32mp15.
- Correct GIC PPI interrupts on stm32mp15 and stm32mp13.
- ST boards:
- Add EXTI support on stm32mp13
- Add DMA, MDMA and DMAmux support to stm32mp13 (iso feature than MP15)
- Update SDMMC1/2 support on stm32mp13: sleep config, update version to v2.2,
update the max frequency to 130 MHz.
- DH boards:
- Enable rproc to control the CM4 and IPCC mailbox to interact with it.
* tag 'stm32-dt-for-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (43 commits)
ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp15
ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp13
ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f7 series
ARM: dts: stm32: remove some timer duplicate unit-address on stm32f7 series
ARM: dts: stm32: Enable EXTI on stm32mp13
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcor-avenger96
ARM: dts: stm32: keep uart4 behavior on stm32mp15xx-dhcom-som
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-picoitx
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-pdk2
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-drc02
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-odyssey
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-lxa-mc1
ARM: dts: stm32: keep uart nodes behavior on stm32mp157a-stinger96
ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0
ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0-of7
ARM: dts: stm32: keep uart4 behavior on stm32mp157a-iot-box
ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-edimm2.2
ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-ctouch2
ARM: dts: stm32: keep uart4 and uart7 behavior on stm32mp15xx-dkx
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-ed1
...
Link: https://lore.kernel.org/r/893924a9-bcc4-9fa9-4f8e-7f56e77f6854@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 & LAN966 DT #1 for 5.18:
- lan966x basic DT and associated evaluation board pcb8291 (2-ports)
- documentation for an upcoming Kontron switch board featuring a LAN9668
- one fix for an old bug we have with PMECC on sama5d2 in some corner
cases
- sama7g5 and its EK: crypto, CAN and DVFS operating points
* tag 'at91-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5: add opps
ARM: dts: at91: sama7g5ek: set regulator voltages for standby state
ARM: dts: at91: fix low limit for CPU regulator
ARM: dts: at91: sama7g5: Enable can0 and can1 support in sama7g5-ek
ARM: dts: at91: sama7g5: Add can controllers of sama7g5
ARM: dts: at91: sama7g5: Add crypto nodes
ARM: dts: at91: Use the generic "crypto" node name for the crypto IPs
ARM: dts: at91: remove status = "okay" from soc specific dtsi
ARM: dts: at91: sama5d2: Fix PMERRLOC resource size
dt-bindings: arm: at91: add Kontron's new KSwitches
ARM: dts: add DT for lan966 SoC and 2-port board pcb8291
Link: https://lore.kernel.org/r/20220225110735.18080-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards: Pine64 PineNote ereader tablet and Bananapi-R2-Pro (both rk356x)
New peripherals for the rk356x-family (pdm-audio, gpu, another i2s, usb2)
A lot of additions to Quartz-A (connector-header, gpu, sdmmc1, io-domains,
usb2) and rk3568-evb1-v10 (rk809-audio, cpu-regulator, gpu, tsadc, led,
usb2, touchscreen).
Fixes for the pwm-regulators, that used wrong names for their supplies
as well adapting the cros-ec pwm nodes to a changed binding (going via
the pwm tree).
And as sort of misc-changes, defined the logic-regulator on rk3399-puma
as well as enabled the mali-gpu on the rk3399-firefly.
* tag 'v5.18-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (28 commits)
arm64: dts: rockchip: align Google CROS EC PWM node name with dtschema
arm64: dts: rockchip: enable rk809 audio codec on the rk3568 evb1-v10
arm64: dts: rockchip: set vdd_gpu regulator on rk3568-evb1-v10 to always on
arm64: dts: rockchip: add the vdd_cpu regulator to rk3568-evb1-v10
arm64: dts: rockchip: enable work led on rk3568-evb1-v10
arm64: dts: rockchip: fix supplies for pwm regulators
arm64: dts: rockchip: define vdd_log on rk3399-puma
arm64: dts: rockchip: Add Pine64 PineNote board
arm64: dts: rockchip: Add pdm node to rk356x
dt-bindings: arm: rockchip: Add Pine64 PineNote board
arm64: dts: rockchip: enable the tsadc on rk3568-evb1-v10
arm64: dts: rockchip: enable the gpu on rk3568-evb1-v10
arm64: dts: rockchip: enable the gpu on quartz64-a
arm64: dts: rockchip: add cooling map and trip points for gpu to rk356x
arm64: dts: rockchip: add gpu node to rk356x
arm64: dts: rockchip: add usb2 support to rk3568-evb1-v10
arm64: dts: rockchip: rename and sort the rk356x usb2 phy handles
arm64: dts: rockchip: add the i2s3_2ch node to rk356x
arm64: dts: rockchip: Add Bananapi R2 Pro
dt-bindings: rockchip: Add BananaPi R2 Pro Board
...
Link: https://lore.kernel.org/r/6456947.djgVdjDsCv@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Usual round of DT patches for the 5.18 merge window, with:
- DT fixes
- ethernet0 alias for Nanopi NEO
- r_uart node for H3/H5
- eMMC and bluetooth nodes for Nanopi NEO air
- updated maintainers for Allwinner SoCs
- new board: A20-Marsboard
* tag 'sunxi-dt-for-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
MAINTAINERS: Update Allwinner SoCs maintainers
ARM: dts: sun8i-h3: Drop args in 'thermal-sensors'
ARM: dts: sun8i: v3s: Move the csi1 block to follow address order
ARM: dts: sun8i: Add ethernet0 alias in Nanopi NEO's device tree
dt-bindings: arm: sunxi: add haoyu,a20-marsboard
ARM: dts: sun7i: Add A20-Marsboard
ARM: dts: sunxi: h3/h5: add r_uart node
ARM: dts: nanopi-neo-air: Add eMMC and bluetooth
Link: https://lore.kernel.org/r/YhgMJ0AqaHopzaW3@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nuvoton device tree updates for 5.18
* Additions to wpcm450 following the upstremaing of the pinctrl/gpio
driver for this platform
* Match more of the platform in MAINTAINERS
* tag 'nuvoton-5.18-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
MAINTAINERS: ARM/WPCM450: Add 'W:' line with wiki
ARM: dts: wpcm450: Add pinmux information to UART0
ARM: dts: wpcm450-supermicro-x9sci-ln4f: Add GPIO LEDs and buttons
ARM: dts: wpcm450: Add pin functions
ARM: dts: wpcm450: Add pinctrl and GPIO nodes
ARM: dts: wpcm450: Add global control registers (GCR) node
MAINTAINERS: Match all of bindings/arm/npcm/ as part of NPCM architecture
dt-bindings: arm/npcm: Add binding for global control registers (GCR)
Link: https://lore.kernel.org/r/CACPK8XdjF6dG04hR+iMpUP8=LSJi5x-hRivgCGDaY7o_461eJw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* 'mstar-dt-next' of https://github.com/linux-chenxing/linux:
ARM: mstar: Extend opp_table for infinity2m
ARM: mstar: Add OPP table for infinity3
ARM: mstar: Add OPP table for infinity
ARM: mstar: Link cpupll to second core
ARM: mstar: Link cpupll to cpu
ARM: mstar: Add cpupll to base dtsi
dt-bindings: clk: mstar msc313 cpupll binding description
ARM: dts: mstar: Add board for 100ask DongShanPiOne
dt-bindings: arm: mstar: Add compatible for 100ask DongShanPiOne
dt-bindings: vendor-prefixes: Add prefix for 100ask
ARM: dts: mstar: Add a dts for Miyoo Mini
dt-bindings: arm: mstar: Add compatible for Miyoo Mini
dt-bindings: vendor-prefixes: Add prefix for Miyoo
ARM: dts: mstar: Add the Wireless Tag IDO-SBC2D06-V1B-22W
dt-bindings: add vendor prefix for Wireless Tag
ARM: dts: mstar: Set gpio compatible for ssd20xd
Link: https://lore.kernel.org/r/20220216193131.59794-1-romain.perier@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DT binding updates for v5.18
- Document support for the new RZ/V2L SoC and the RZ/V2L SMARC EVK
board.
* tag 'renesas-dt-bindings-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: power: renesas,rzg2l-sysc: Document RZ/V2L SoC
dt-bindings: arm: renesas: Document Renesas RZ/V2L SoC on SMARC EVK
Link: https://lore.kernel.org/r/cover.1644587209.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.18
1. Minor improvements and dtschema fixes (node names, properties).
2. Fix issues pointed out by DT schema checks:
- Add necessary clock controller inputs on Exynos5260.
- Drop unsupported regulators on Odroid XU.
- Add USB DWC3 supplies.
- Drop old thermal properties from Exynos4210.
3. Add support for Samsung Chagall WiFi (Exynos5420, Samsung Galaxy Tab
S 10.5", SM-T800 ) and a similar Samsung Klimt WiFi (Samsung Galaxy
Tab S 8.4").
4. Add battery to Samsung P4Nnote (Exynos4412, Samsung Galaxy Note
10.1).
* tag 'samsung-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (22 commits)
ARM: dts: exynos: use generic node name for LPDDR3 timings in Odroid
ARM: dts: exynos: add charger and battery to p4note
ARM: dts: exynos: update dma node name with dtschema
ARM: dts: exynos: use define for TMU clock on Exynos4412
ARM: dts: exynos: drop old thermal properties from Exynos4210
ARM: dts: exynos: add fake USB DWC3 supplies to SMDK5410
ARM: dts: exynos: add USB DWC3 supplies to SMDK5420
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Peach Pi
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Peach Pit
ARM: dts: exynos: add USB DWC3 supplies to ArndaleOcta
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Spring
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Snow
ARM: dts: exynos: add USB DWC3 supplies to SMDK5250
ARM: dts: exynos: add USB DWC3 supplies to Arndale
ARM: dts: exynos: Add support for Samsung Klimt WiFi
dt-bindings: arm: samsung: document Klimt WiFi board binding
ARM: dts: exynos: Add support for Samsung Chagall WiFi
dt-bindings: arm: samsung: document Chagall WiFi board binding
ARM: dts: exynos: drop unsupported MAX77802 regulators on Odroid XU
ARM: dts: exynos: add necessary clock controller inputs in Exynos5260
...
Link: https://lore.kernel.org/r/20220209145226.184375-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The GW7903 is based on the i.MX 8M Mini SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- microSD connector with UHS support
- LIS2DE12 3-axis accelerometer
- Gateworks System Controller
- IMX8M FEC
- software selectable RS232/RS485/RS422 serial transceiver
- PMIC
- 2x off-board bi-directional opto-isolated digital I/O
- 1x M.2 A-E Key Socket and 1x MiniPCIe socket with USB2.0 and PCIe
(resistor loading to route PCIe/USB2 between M.2 and MiniPCIe socket)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The compatible string is already in use, fix the chip list in binding to
include it.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
A nuvoton,*-gcr node is present in nuvoton-common-npcm7xx.dtsi and will
be added to nuvoton-wpcm450.dtsi. It is necessary for the NPCM7xx and
WPCM450 pinctrl drivers, and may later be used to retrieve SoC model and
version information.
This patch adds a binding to describe this node.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220129115228.2257310-2-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Wireless Tag IDO-SBC2D06-V1B-22W[1] is an SBC powered by SSD202D
with a dual Ethernet and a connector for a 4-inch and 7-inch display.
It embeds a System-On-Module IDO-SOM2D01[2] with an Mstar SSD202 SoC
dual-core Cortex-A7 CPU @ 1.2Ghz , 2D GPU, 128 MB DDR3 (on-chip) and
a 256MB SPI NAND flash. This commit adds basic definition for this
board.
1. http://linux-chenxing.org/infinity2/ido-sbc2d06
2. http://www.wireless-tag.com/portfolio/ido-som2d01
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Add toradex,verdin-imx8mm for our new Verdin iMX8M Mini modules, its
nonwifi and wifi variants and the carrier boards (both Dahlia and the
Verdin Development Board) they may be mated in.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
