Now that all drivers use qdio_inspect_queue() and qdio's internal
queue tasklets are gone, the driver-specified queue handlers are
only called for async error reporting (eg. for an error condition in
the QEBSM code).
So take a moment to clean up the Output Queue handlers (they are
_always_ called with qdio_error != 0), and clarify which error types
can be reported through what interface. As Benjamin already suggested
a while ago, we should turn these into distinct enums at some point.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
get_outbound_buffer_frontier() is only reached via qdio_inspect_queue(),
and there we already call qdio_siga_sync_q() unconditionally.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Both qdio drivers have moved away from using qdio's internal tasklet
and timer mechanisms for Output Queues. Rip out all the leftovers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If qdio_cancel_ccw() times out (or is interrupted) before the interrupt
for the {halt,clear} action arrives, report this back to the caller as
an error.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
If the ESTABLISH ccw fails (ie. the qdio_irq is set to
QDIO_IRQ_STATE_ERR), we don't need to call qdio_shutdown() for rolling
back our earlier actions. All the needed logic is already available in
qdio_establish()'s error chain, and using it means we don't have to
temporarily drop the setup_mutex either.
This makes qdio_shutdown() a purely external function, that should only
be called by the driver if an earlier qdio_establish() succeeded.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When the ESTABLISH ccw does not complete within the specified timeout,
try our best to cancel the ccw program that is still active on the
device. Otherwise the IO subsystem might be accessing it even after
the driver eg. called qdio_free().
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 2.6.27
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When qdio_establish() times out while waiting for the ESTABLISH ccw to
complete, it calls qdio_shutdown() to roll back all of its previous
actions. But at this point the qdio_irq's state is still
QDIO_IRQ_STATE_INACTIVE, so qdio_shutdown() will exit immediately
without doing any actual work.
Which means that eg. the qdio_irq's thinint-indicator stays registered,
and cdev->handler isn't restored to its old value. And since
commit 954d6235be ("s390/qdio: make thinint registration symmetric")
the qdio_irq also stays on the tiq_list, so on the next qdio_establish()
we might get a helpful BUG from the list-debugging code:
...
[ 4633.512591] list_add double add: new=00000000005a4110, prev=00000001b357db78, next=00000000005a4110.
[ 4633.512621] ------------[ cut here ]------------
[ 4633.512623] kernel BUG at lib/list_debug.c:29!
...
[ 4633.512796] [<00000001b2c6ee9a>] __list_add_valid+0x82/0xa0
[ 4633.512798] ([<00000001b2c6ee96>] __list_add_valid+0x7e/0xa0)
[ 4633.512800] [<00000001b2fcecce>] qdio_establish_thinint+0x116/0x190
[ 4633.512805] [<00000001b2fcbe58>] qdio_establish+0x128/0x498
...
Fix this by extracting a goto-chain from the existing error exits in
qdio_establish(), and check the return value of the wait_event_...()
to detect the timeout condition.
Fixes: 779e6e1c72 ("[S390] qdio: new qdio driver.")
Root-caused-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 2.6.27
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There is no useful information within [STARTUP_NORMAL_OFFSET, HEAD_END] now.
But the memory region [0, STARTUP_NORMAL_OFFSET] is used by:
* lowcore
* kdump for swapping memory
* stand-alone zipl dumpers for code, data, stack and heap
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This change simplifies the task of making the decompressor relocatable.
The decompressor's image contains special DMA sections between _sdma and
_edma. This DMA segment is loaded at boot as part of the decompressor and
then simply handed over to the decompressed kernel. The decompressor itself
never uses it in any way. The primary reason for this is the need to keep
the aforementioned DMA segment below 2GB which is required by architecture,
and because the decompressor is always loaded at a fixed low physical
address, it is guaranteed that the DMA region will not cross the 2GB
memory limit. If the DMA region had been placed in the decompressed kernel,
then KASLR would make this guarantee impossible to fulfill or it would
be restricted to the first 2GB of memory address space.
This commit moves all DMA sections between _sdma and _edma from
the decompressor's image to the decompressed kernel's image. The complete
DMA region is placed in the init section of the decompressed kernel and
immediately relocated below 2GB at start-up before it is needed by other
parts of the decompressed kernel. The relocation of the DMA region happens
even if the decompressed kernel is already located below 2GB in order
to keep the first implementation simple. The relocation should not have
any noticeable impact on boot time because the DMA segment is only a couple
of pages.
After relocating the DMA sections, the kernel has to fix all references
which point into it. In order to automate this, place all variables
pointing into the DMA sections in a special .dma.refs section. All such
variables must be defined using the new __dma_ref macro. Only variables
containing addresses within the DMA sections must be placed in the new
.dma.refs section.
Furthermore, move the initialization of control registers from
the decompressor to the decompressed kernel because some control registers
reference tables that must be placed in the DMA data section to
guarantee that their addresses are below 2G. Because the decompressed
kernel relocates the DMA sections at startup, the content of control
registers CR2, CR5 and CR15 must be updated with new addresses after
the relocation. The decompressed kernel initializes all control registers
early at boot and then updates the content of CR2, CR5 and CR15
as soon as the DMA relocation has occurred. This practically reverts
the commit a80313ff91 ("s390/kernel: introduce .dma sections").
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
As a preparation for moving the .dma.data section from the decompressor to
the decompressed kernel, the .dma.data section must be made relocatable
by replacing absolute memory addressing with relative one. This is required
in order to be able to relocate the DMA section to a memory address <= 2G
as required by the hardware architecture. The DMA section must be
relocated in case the decompressed kernel was loaded to an address >= 2G
which can occur if KASAN is enabled. By making the whole DMA section
position-independent we avoid applying relocations to it whenever it is
moved to a different address, which becomes possible as soon as it becomes
a part of the decompressed kernel.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Both macros are used only in decompressor's head.S, unnecessary to put
them in a global header used in many places like setup.h is.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To reduce duplication, replace error-prone and hard-coded parameter area
offsets with auto-generated ones.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The macros
* IPL_DEVICE_OFFSET
* INITRD_START_OFFSET
* INITRD_SIZE_OFFSET
* OLDMEM_BASE_OFFSET
* OLDMEM_SIZE_OFFSET
* KERNEL_VERSION_OFFSET
* COMMAND_LINE_OFFSET
are no longer necessary and used only to define another set of macros
with the same names but w/o the suffix _OFFSET. Therefore, drop this
unnecessary indirection.
Drop the macro KERNEL_VERSION_OFFSET w/o renaming it to KERNEL_VERSION
because it is used nowhere.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
These symbolic constants are used only by assembler code now:
* COMMAND_LINE
* IPL_DEVICE
C code of the decompressed kernel should use boot data passed
by the decompressor instead.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The new boot data struct shall replace global variables OLDMEM_BASE and
OLDMEM_SIZE. It is initialized in the decompressor and passed
to the decompressed kernel. In comparison to the old solution, this one
doesn't access data at fixed physical addresses which will become important
when the decompressor becomes relocatable.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The new boot data struct shall replace global variables INITRD_START and
INITRD_SIZE. It is initialized in the decompressor and passed
to the decompressed kernel. In comparison to the old solution, this one
doesn't access data at fixed physical addresses which will become important
when the decompressor becomes relocatable.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To make the decompressor relocatable, the early SCLP buffer with a fixed
address must be replaced with a relocatable C buffer of the according size
and alignment as required by SCLP.
Introduce a new function sclp_early_set_buffer() into the SCLP driver
which enables the decompressor to change the SCLP early buffer at any time.
This will be useful when the decompressor becomes fully relocatable and
might need to change the SCLP early buffer to one with an address < 2G
as required by SCLP because it was loaded at an address >= 2G.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use STARTUP_NORMAL_OFFSET and STARTUP_KDUMP_OFFSET instead of magic numbers.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use system call functions instead of open-coding svc inline
assemblies. This is mostly to get rid of even more register asm
constructs.
Besides that, it makes the code also a bit easier to understand.
The generated code is identical to what is was before.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Provide generic system call functions which should be used whenever a
system call needs to be done from user space. The only in-kernel code
is vdso, which will be converted with a follow on patch.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Using register asm statements has been proven to be very error prone,
especially when using code instrumentation where gcc may add function
calls, which clobbers register contents in an unexpected way.
Therefore get rid of register asm statements in cpacf code, and make
sure this bug class cannot happen.
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove dasd ioctl debug printk which seems to be a leftover from the
very early days. At least it seems to be quite pointless.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
De-duplicate checks for Protected Host Virtualization in decompressor and
kernel.
Set prot_virt_host=0 in the decompressor in *any* of the following cases
and hand it over to the decompressed kernel:
* No explicit prot_virt=1 is given on the kernel command-line
* Protected Guest Virtualization is enabled
* Hardware support not present
* kdump or stand-alone dump
The decompressed kernel needs to use only is_prot_virt_host() instead of
performing again all checks done by the decompressor.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
A dump kernel is neither required nor able to support Secure Execution.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The functions adjust_to_uv_max() and uv_query_info() are used only
in the decompressor. Therefore, move the function declarations from
the global arch/s390/include/asm/uv.h to arch/s390/boot/uv.h.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In case of a jump label print the real address of the piece of code
where a mismatch was detected. This is right before the system panics,
so there is nothing revealed.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Print the real pte, pmd, etc. values instead of some hashed
value. Otherwise debugging would be even more difficult.
This also matches what most other architectures are doing.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
A buffer that can be used for communication with SCLP is required
to lie below 2GB memory address. Therefore, both sclp_info_sccb
and sclp_early_sccb must fulfill this requirement if passed directly
to the sclp_early_cmd() function. Instead, use only sclp_early_sccb
for communication with SCLP. This allows the buffer sclp_info_sccb
to be placed anywhere in the memory address space and, therefore,
simplifies the process of making the decompressor relocatable later on,
one thing less to relocate. And make sure that the length of the new unified
early SCLP buffer is no less than the length of the removed sclp_info_sccb
buffer which might be larger than the length of the sclp_early_sccb buffer.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
* The linux/spinlock.h header was included indirectly by the decompressor
and brought unnecessary build dependencies.
* Use proper includes in files which either directly or indirectly included
cio.h and were hidden until now by the included linux/spinlock.h, e.g.
linux/string.h for memcpy() or asm/page.h for PAGE_SIZE.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Instead of using constant addresses for the normal and dump-info stacks,
allocate both stacks in the decompressor's image and load the stack register
in a position-independent manner.
This will allow loading and entering the decompressor at an arbitrary
memory address without corrupting the content at the fixed addresses
used until now for both stacks. This is one of the prerequisites
for being able to kexec the decompressor from its load address without
relocating it first.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To prevent multiple incompatible declarations of symbols and to catch
such mistakes at compile time.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
gcc doesn't care, but clang quite reasonably pointed out that the recent
commit e9ba16e68c ("smpboot: Mark idle_init() as __always_inlined to
work around aggressive compiler un-inlining") did some really odd
things:
kernel/smpboot.c:50:20: warning: duplicate 'inline' declaration specifier [-Wduplicate-decl-specifier]
static inline void __always_inline idle_init(unsigned int cpu)
^
which not only has that duplicate inlining specifier, but the new
__always_inline was put in the wrong place of the function definition.
We put the storage class specifiers (ie things like "static" and
"extern") first, and the type information after that. And while the
compiler may not care, we put the inline specifier before the types.
So it should be just
static __always_inline void idle_init(unsigned int cpu)
instead.
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix guest to host memory corruption in H_RTAS due to missing nargs check.
- Fix guest triggerable host crashes due to bad handling of nested guest TM state.
- Fix possible crashes due to incorrect reference counting in kvm_arch_vcpu_ioctl().
- Two commits fixing some regressions in KVM transactional memory handling introduced by
the recent rework of the KVM code.
Thanks to: Nicholas Piggin, Alexey Kardashevskiy, Michael Neuling.
-----BEGIN PGP SIGNATURE-----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=2TkE
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix guest to host memory corruption in H_RTAS due to missing nargs
check.
- Fix guest triggerable host crashes due to bad handling of nested
guest TM state.
- Fix possible crashes due to incorrect reference counting in
kvm_arch_vcpu_ioctl().
- Two commits fixing some regressions in KVM transactional memory
handling introduced by the recent rework of the KVM code.
Thanks to Nicholas Piggin, Alexey Kardashevskiy, and Michael Neuling.
* tag 'powerpc-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak
KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash
KVM: PPC: Book3S HV P9: Fix guest TM support
- Plug a race between rearm and process tick in the posix CPU timers code
- Make the optimization to avoid recalculation of the next timer interrupt
work correctly when there are no timers pending.
-----BEGIN PGP SIGNATURE-----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=Q6oh
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of timer related fixes:
- Plug a race between rearm and process tick in the posix CPU timers
code
- Make the optimization to avoid recalculation of the next timer
interrupt work correctly when there are no timers pending"
* tag 'timers-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix get_next_timer_interrupt() with no timers pending
posix-cpu-timers: Fix rearm racing against process tick
un-inlining which results in a section mismatch.
-----BEGIN PGP SIGNATURE-----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=ho3b
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 jump label fix from Thomas Gleixner:
"A single fix for jump labels to prevent the compiler from agressive
un-inlining which results in a section mismatch"
* tag 'locking-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_labels: Mark __jump_label_transform() as __always_inlined to work around aggressive compiler un-inlining
- Prevent memblock and I/O reserved resources to get out of sync when EFI
memreserve is in use.
- Don't claim a non-existing table is invalid
- Don't warn when firmware memory is already reserved correctly
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmD9K5gTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYobGJEACwSSl6hOgP3b9DvtBc4+IrMqz+zpPu
bDUnHUF5+BgDrpUGQxWNjvPiqDxLzhX+zoJ26PxuLENnbAfZgx92QK2D3qQoj6Mc
HPtGaFqk5OTPuqhmQ/Nfv6XcvHxeVBoVlyVnXWIjsbDS7eA2YknyHDYjiewtd60k
J75wBKQjGeoem396E8PWyEm/anEmb9L3r5bt/P946t01myPmfRCcXpHGMLDAeu0a
losKubGomHKbzqa9VjEVlwAJK95TKXyMa+xN5SWIzFSpU4kHIj7TNpJgogVSWmIk
WCtJskj9jIcKhJwsMZorsI5UWeiP+m/hvDBzGJxC8tvqM7dRfdmR414v2B5G6LFh
UFPJndbSDP7ND4jo0jqQF7V41VMIYPDRcdD1J+LWj4pGAQRmCJHMNL3n1Qw1MZJ8
3La+b2/1oJJ6bU+5hFnqg2y5qGmxKUr5c3VnTDWvp/rd11BkZEVbCn4hOvWqu2jR
Dzx0BTC+LBTFwNsv211Ts0UxuyWehRLPrGMR/Q/LHmqgvHvEE+ih/uF0UbRX1GnZ
jSs0lKYg14Gx/hCFY46LRthJ99PKAOXhPf0hVjGcgvUrGV8+DNngKJjj1x2ah9e2
5eNWw1LgMoAj+01zzWPJ3LHlpJ5D/WGfnX2ioDv+ZsbGhXQyzsMIITTUhRw3H3Pg
Oc1WMpeIS0Sn0Q==
=hYsV
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
"A set of EFI fixes:
- Prevent memblock and I/O reserved resources to get out of sync when
EFI memreserve is in use.
- Don't claim a non-existing table is invalid
- Don't warn when firmware memory is already reserved correctly"
* tag 'efi-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/mokvar: Reserve the table only if it is in boot services data
efi/libstub: Fix the efi_load_initrd function description
firmware/efi: Tell memblock about EFI iomem reservations
efi/tpm: Differentiate missing and invalid final event log table.
causes a section mismatch.
-----BEGIN PGP SIGNATURE-----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=t8VJ
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fix from Thomas Gleixner:
"A single update for the boot code to prevent aggressive un-inlining
which causes a section mismatch"
* tag 'core-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smpboot: Mark idle_init() as __always_inlined to work around aggressive compiler un-inlining
-----BEGIN PGP SIGNATURE-----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=Ngut
-----END PGP SIGNATURE-----
Merge tag '5.14-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes, including a DFS failover fix, two fallocate
fixes, and two trivial coverity cleanups"
* tag '5.14-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix fallocate when trying to allocate a hole.
CIFS: Clarify SMB1 code for POSIX delete file
CIFS: Clarify SMB1 code for POSIX Create
cifs: support share failover when remounting
cifs: only write 64kb at a time when fallocating a small region of a file
* A fix to properly set the memory size, which fixes 32-bit systems.
* A fix to allow the initrd to load anywhere in memory, rather that
restricting it to the first 256MiB.
* A fix for the mem= parameter on 64-bit systems, to properly account
for the maximum supported memory now that the kernel is outside the
linear map.
* A fix to avoid installing mappings into the last 4KiB of memory, which
conflicts with error values.
* A fix to avoid the stack from being freed while it is being walked.
* A handful of fixes to the new copy to/from user routines.
-----BEGIN PGP SIGNATURE-----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=gyPr
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- properly set the memory size, which fixes 32-bit systems
- allow initrd to load anywhere in memory, rather that restricting it
to the first 256MiB
- fix the 'mem=' parameter on 64-bit systems to properly account for
the maximum supported memory now that the kernel is outside the
linear map
- avoid installing mappings into the last 4KiB of memory, which
conflicts with error values
- avoid the stack from being freed while it is being walked
- a handful of fixes to the new copy to/from user routines
* tag 'riscv-for-linus-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: __asm_copy_to-from_user: Fix: Typos in comments
riscv: __asm_copy_to-from_user: Remove unnecessary size check
riscv: __asm_copy_to-from_user: Fix: fail on RV32
riscv: __asm_copy_to-from_user: Fix: overrun copy
riscv: stacktrace: pin the task's stack in get_wchan
riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE
riscv: Make sure the linear mapping does not use the kernel mapping
riscv: Fix memory_limit for 64-bit kernel
RISC-V: load initrd wherever it fits into memory
riscv: Fix 32-bit RISC-V boot failure
Commit 71f6428332 ("ACPI: utils: Fix reference counting in
for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer
that was possibly NULL. That fails miserably, because that helper
inline function is not set up to handle that case.
Just make acpi_dev_put() silently accept a NULL pointer, rather than
calling down to put_device() with an invalid offset off that NULL
pointer.
Link: https://lore.kernel.org/lkml/a607c149-6bf6-0fd0-0e31-100378504da2@kernel.dk/
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Daniel Scally <djrscally@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Four fixes, all in drivers, all of which can lead to user visible
problems in certain situations.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYPxK+iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaTeAP99TVNt
QDcY97BEpdnbfiNk12oQzmb+DXMJIky8c4QPQgD9H6y9npruZ6QA0WVyJ3NHgLJC
y3MClDGcN3OAtNAu2K0=
=/VG3
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers, all of which can lead to user visible
problems in certain situations"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Fix NULL dereference on XCOPY completion
scsi: mpt3sas: Transition IOC to Ready state during shutdown
scsi: target: Fix protect handling in WRITE SAME(32)
scsi: iscsi: Fix iface sysfs attr detection
-----BEGIN PGP SIGNATURE-----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=uzwV
-----END PGP SIGNATURE-----
Merge tag 'block-5.14-2021-07-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- tracing fix (Keith Busch)
- fix multipath head refcounting (Hannes Reinecke)
- Write Zeroes vs PI fix (me)
- drop a bogus WARN_ON (Zhihao Cheng)
- Increase max blk-cgroup policy size, now that mq-deadline
uses it too (Oleksandr)
* tag 'block-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
nvme: set the PRACT bit when using Write Zeroes with T10 PI
nvme: fix nvme_setup_command metadata trace event
nvme: fix refcounting imbalance when all paths are down
nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
block: increase BLKCG_MAX_POLS
Pull i2c fixes from Wolfram Sang:
"Two bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Poll for MCF
misc: eeprom: at24: Always append device id even if label property is set.
Merge misc mm fixes from Andrew Morton:
"15 patches.
VM subsystems affected by this patch series: userfaultfd, kfence,
highmem, pagealloc, memblock, pagecache, secretmem, pagemap, and
hugetlbfs"
* akpm:
hugetlbfs: fix mount mode command line processing
mm: fix the deadlock in finish_fault()
mm: mmap_lock: fix disabling preemption directly
mm/secretmem: wire up ->set_page_dirty
writeback, cgroup: do not reparent dax inodes
writeback, cgroup: remove wb from offline list before releasing refcnt
memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions
mm: page_alloc: fix page_poison=1 / INIT_ON_ALLOC_DEFAULT_ON interaction
mm: use kmap_local_page in memzero_page
mm: call flush_dcache_page() in memcpy_to_page() and memzero_page()
kfence: skip all GFP_ZONEMASK allocations
kfence: move the size check to the beginning of __kfence_alloc()
kfence: defer kfence_test_init to ensure that kunit debugfs is created
selftest: use mmap instead of posix_memalign to allocate memory
userfaultfd: do not untag user pointers
Julian Wiedmann
Alexander Egorenkov
Heiko Carstens
Linus Torvalds