Configure mt7986 wmac soc clocks in mt7986_wmac_init routine.
Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
There is a small race window where ongoing tx activity can lead to a skb
getting added to the status tracking idr after that idr has already been
cleaned up, which will keep the wcid linked in the status poll list.
Fix this by only adding status skbs if the wcid pointer is still assigned
in dev->wcid, which gets cleared early by mt76_sta_pre_rcu_remove
Fixes: bd1e3e7b69 ("mt76: introduce packet_id idr")
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The driver needs to check if the format is 802.2 vs 802.3 in order to set
a tx descriptor flag. skb->protocol can't be used, since it may not be properly
initialized for packets coming in from a packet socket.
Fix misdetection by checking the ethertype from the skb data instead
Reported-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fixes potential latency / packet drop issues in cases where a BA session has
not (yet) been established.
Fixes: e195dad141 ("mt76: add support for 802.3 rx frames")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This patch disables RX_TRANS_SHORT to make MDP to do header translation
when payload less than 8 bytes, hence the (QoS) null data can be encapsulated
to 802.3 format. However, WDS requires (QoS) null data in 802.11 format
to created vlan AP interfaces.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: lian.chen <lian.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add RF registers read/write support for debugging RF issues, which
should be processed by mcu commands.
The index of rf registers use the generic regidx, and are combined
with two parts: WF selection [31:28] and offset [27:0].
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Don't populate the read-only array ppet16_ppet8_ru3_ru0 on the stack but
instead make it static const. Also makes the object code a little smaller.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Don't populate the read-only array ppet16_ppet8_ru3_ru0 on the stack but
instead make it static const. Also makes the object code a little smaller.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
To make sure we have the proper antenna config in 6g cap,
move IEEE80211_VHT_CAP_[T/R]X_ANTENNA_PATTERN to stream init.
Fixes: edf9dab8ba ("mt76: add 6GHz support")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When the QoS ack policy was set to non explicit / psmp ack, frames are treated
as not being part of a BA session, which causes extra latency on reordering.
Fix this by only bypassing reordering for packets with no-ack policy
Signed-off-by: Felix Fietkau <nbd@nbd.name>
add AP mode support to mt7921 that can work for mt7921[e,s,u]
with the common code.
Tested-by: Deren Wu <deren.wu@mediatek.com>
Tested-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use 0xff (GENMASK(7,0)) in mt7915_init_bitrate_mask routine in order to
initialize bitrate_mask structure in order to avoid truncating value in
memset().
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Report rx mode in mt7915_mac_fill_rx_rate routine in order to properly
add he radiotap if mode is at least HE_SU.
Fixes: 1c9db0aa23 ("mt76: mt7915: update rx rate reporting for mt7916")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix typo in mt7915_muru_debug_set routine and pass muru_debug value to
mt7915_mcu_muru_debug_set() instead of data pointer.
Fixes: 1966a5078f ("mt76: mt7915: add mu-mimo and ofdma debugfs knobs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix possible NULL pointer dereference in mt7915_mac_fill_rx_vector
routine if the chip does not support dbdc and the hw reports band_idx
set to 1.
Fixes: 78fc30a21c ("mt76: mt7915: move testmode data from dev to phy")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add default case for type switch in mt7986_wmac_gpio_setup routine in
order to avoid a possible uninitialized pointer dereference.
Fixes: 99ad32a4ca ("mt76: mt7915: add support for MT7986")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In case of error, some resources must be freed, as already done above and
below the devm_kmemdup() and __mt7921e_mcu_drv_pmctrl() calls added in the
commit in Fixes:.
Fixes: 602cc0c961 ("mt76: mt7921e: fix possible probe failure after reboot")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Soft reboot might not clear certain condition, so always call
mt7915_wfsys_reset() during init.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Honor runtime-pm user configuration in mt7921_sniffer_interface_iter
routine if we do not have a monitor interface.
Fixes: 1f12fa34e5 ("mt76: mt7921: don't enable beacon filter when IEEE80211_CONF_CHANGE_MONITOR is set")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7921 is currently using rxfilter defined in mt76_dev for rx filter
configuration. Fix mt7921_configure_filter implementation.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce suspend/resume callbacks for mt7921u driver.
Tested-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MT7915_MAX_INTERFACES is per-band declaration in MT7915/MT7986/MT7916.
Enlarge vif_mask to 64 bits wide, including the bit operation.
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
dma unmap is already needed for cleanup anyway, so we don't need the extra
tracking and can save a bit of memory here
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This code was accidentally dropped while adding 6 GHz support
Fixes: b4d093e321 ("mt76: mt7915: add 6 GHz support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This memory allocation failure can be triggered by fault injection or
high pressure testing, resulting a WARN.
Fix this by replacing WARN with pr_warn.
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220511014453.1621366-1-dzm91@hust.edu.cn
Currently, upon virtual interface creation, wfx_add_interface() stores
a reference to the corresponding struct ieee80211_vif in private data,
for later usage. This is not needed when using the container_of
construct. This construct already has all the info it needs to retrieve
the reference to the corresponding struct from the offset that is
already available, inherent in container_of(), between its type and
member inputs (struct ieee80211_vif and drv_priv, respectively).
Remove vif (which was previously storing the reference to the struct
ieee80211_vif) from the struct wfx_vif, define a function
wvif_to_vif(wvif) for container_of(), and replace all wvif->vif with
the newly defined container_of construct.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506170046.GA1297231@jaehee-ThinkPad-X1-Extreme
BSSID CAM is a kind of CAM that is used to determine if we receive a packet
or not. Add an entry to assist in debugging.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506120216.58567-6-pkshih@realtek.com
EDCCA signal can block transmitting in certain situation, so ignore this
signal and use others to decide transmitting time.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506120216.58567-4-pkshih@realtek.com
Set proper setting according to RX quota, and then it doesn't break buffer
due to size of received packet exceeding buffer size.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506120216.58567-3-pkshih@realtek.com
Modify NBI and PD boost settings according to different primary channels.
This setting can decrease the false alarm induced by DC.
Signed-off-by: Hsuan Hung <hsuan8331@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506120216.58567-2-pkshih@realtek.com
Clean up the following smatch warning:
drivers/ssb/pci.c:917 ssb_pci_sprom_get() warn: ignoring unreachable
code.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506075814.115059-1-jiapeng.chong@linux.alibaba.com
This allows firmware to provide MAC address using device tree. Like in
case there is no MAC burned in wlan NVRAM.
Signed-off-by: Pavel Löbl <pavel@loebl.cz>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506044246.67146-1-pavel@loebl.cz
'vmm_table' array contains the size of data buffer length including host
header length. In 'vmm_table' array, the Zero value means the end of
vmm_entries that needs to transfer to firmware which is calculated based on
VMM free size in firmware.
Use 'vmm_table' valid entry check before fetching the entry from TX queue to
only copy valid number of entries to avoid possible NULL pointer exception
observed sometimes during large file transfers.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220504161924.2146601-5-ajay.kathat@microchip.com
Monitor(mon.) interface is used for handling the AP mode and 'ieee80211_ptr'
reference is not getting set for it. Like earlier implementation,
use register_netdevice() instead of cfg80211_register_netdevice() which
expects valid 'ieee80211_ptr' reference to avoid the possible crash.
Fixes: 2fe8ef1062 ("cfg80211: change netdev registration/unregistration semantics")
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220504161924.2146601-3-ajay.kathat@microchip.com
The function number was not correct(reset to 0) when host resumes from
suspend state. Use hardcoded value in function base information
register(FBR base address) to re-initialize correctly on host resume.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220504161924.2146601-2-ajay.kathat@microchip.com
Increase firmware version array size to hold complete version information.
The firmware commit id(Build:) information is also part of the firmware
version string.
Firmware version format:
WILC_WIFI_FW_REL_XX_XX Build: XXXXX
e.g.
WILC_WIFI_FW_REL_15_6 Build: 12804
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220504161924.2146601-1-ajay.kathat@microchip.com
Fine tune algorithm of adaptivity sensitivity to avoid disconnecting
from AP suddenly in field.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506235045.4669-1-pkshih@realtek.com
With introduction of vmap'ed stacks, stack parameters can no
longer be used for DMA and now leads to kernel panic.
It happens at several places for the wl1251 (e.g. when
accessed through SDIO) making it unuseable on e.g. the
OpenPandora.
We solve this by allocating temporary buffers or use wl1251_read32().
Tested on v5.18-rc5 with OpenPandora.
Fixes: a1c510d0ad ("ARM: implement support for vmap'ed stacks")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1676021ae8b6d7aada0b1806fed99b1b8359bdc4.1651495112.git.hns@goldelico.com
Lorenzo Bianconi
Felix Fietkau
Bo Jiao
Yunbo Yu
Shayne Chen
Sean Wang
Colin Ian King
Ryder Lee
Deren Wu
Christophe JAILLET
Evelyn Tsai
Dongliang Mu
Jaehee Park
Ping-Ke Shih
Hsuan Hung
Jiapeng Chong
Pavel Löbl
Ajay Singh
Andy Shevchenko
Chin-Yen Lee
H. Nikolaus Schaller