The files in the info directory for MBA are as follows:
num_closids
The maximum number of CLOSids available for MBA
min_bandwidth
The minimum memory bandwidth percentage value
bandwidth_gran
The granularity of the bandwidth control in percent for the
particular CPU SKU. Intermediate values entered are rounded off
to the previous control step available. Available bandwidth
control steps are minimum_bandwidth + N * bandwidth_gran.
delay_linear
When set, the OS writes a linear percentage based value to the
control MSRs ranging from minimum_bandwidth to 100 percent.
This value is informational and has no influence on the values
written to the schemata files. The values written to the
schemata are always bandwidth percentage that is requested.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Link: http://lkml.kernel.org/r/1491611637-20417-7-git-send-email-vikas.shivappa@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Memory bandwidth allocation requires different information than cache
allocation.
To avoid a lump of data in struct rdt_resource, move all cache related
information into a seperate structure and add that to struct rdt_resource.
Sanitize the data types while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Since commit:
4bcc595ccd "printk: reinstate KERN_CONT for printing"
... the debug output of signal_fault(), do_trap() and do_general_protection()
looks garbled, e.g.:
traps: conftest[9335] trap invalid opcode ip:400428 sp:7ffeaba1b0d8 error:0
in conftest[400000+1000]
(note the unintended line break.)
Fix the bug by adding KERN_CONTs.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The resource control filesystem provides only a bitmask based cpus file for
assigning CPUs to a resource group. That's cumbersome with large cpumasks
and non-intuitive when modifying the file from the command line.
Range based cpu lists are commonly used along with bitmask based cpu files
in various subsystems throughout the kernel.
Add 'cpus_list' file which is CPU range based.
# cd /sys/fs/resctrl/
# echo 1-10 > krava/cpus_list
# cat krava/cpus_list
1-10
# cat krava/cpus
0007fe
# cat cpus
fffff9
# cat cpus_list
0,3-23
[ tglx: Massaged changelog and replaced "bitmask lists" by "CPU ranges" ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20170410145232.GF25354@krava
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The vsyscall32 sysctl can racy against a concurrent fork when it switches
from disabled to enabled:
arch_setup_additional_pages()
if (vdso32_enabled)
--> No mapping
sysctl.vsysscall32()
--> vdso32_enabled = true
create_elf_tables()
ARCH_DLINFO_IA32
if (vdso32_enabled) {
--> Add VDSO entry with NULL pointer
Make ARCH_DLINFO_IA32 check whether the VDSO mapping has been set up for
the newly forked process or not.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170410151723.602367196@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull late GPIO fixes from Linus Walleij:
"Some late coming ACPI fixes for GPIO.
We're dealing with ACPI issues here. The first is related to wake IRQs
on Bay Trail/Cherry Trail CPUs which are common in laptops. The second
is about proper probe deferral when reading _CRS properties.
For my untrained eye it seems there was some quarrel between the BIOS
and the kernel about who is supposed to deal with wakeups from GPIO
lines"
* tag 'gpio-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
ACPI / gpio: do not fall back to parsing _CRS when we get a deferral
gpio: acpi: Call enable_irq_wake for _IAE GpioInts with Wake set
Pull nios2 fix from Ley Foon Tan:
- nios2: reserve boot memory for device tree
* tag 'nios2-v4.11-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: reserve boot memory for device tree
Pull drm fixes from Dave Airlie:
"This is just mostly stuff that missed rc5, from vmwgfx and msm
drivers"
* tag 'drm-fixes-for-v4.11-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/msm: Make sure to detach the MMU during GPU cleanup
drm/msm/hdmi: redefinitions of macros not required
drm/msm/mdp5: Update SSPP_MAX value
drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
drm/msm: Don't allow zero sized buffer objects
drm/msm: Fix wrong pointer check in a5xx_destroy
drm/msm: adreno: fix build error without debugfs
drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
drm/vmwgfx: Remove getparam error message
drm/ttm: Avoid calling drm_ht_remove from atomic context
drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
drm/vmwgfx: Type-check lookups of fence objects
Pull Xtensa fixes from Max Filippov:
- make __pa work with uncached KSEG addresses, it fixes DMA memory
mmapping and DMA debug
- fix torn stack dump output
- wire up statx syscall
* tag 'xtensa-20170403' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: wire up statx system call
xtensa: fix stack dump output
xtensa: make __pa work with uncached KSEG addresses
misc msm fixes.
* 'msm-fixes-4.11-rc6' of git://people.freedesktop.org/~robclark/linux:
drm/msm: Make sure to detach the MMU during GPU cleanup
drm/msm/hdmi: redefinitions of macros not required
drm/msm/mdp5: Update SSPP_MAX value
drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
drm/msm: Don't allow zero sized buffer objects
drm/msm: Fix wrong pointer check in a5xx_destroy
drm/msm: adreno: fix build error without debugfs
We should be detaching the MMU before destroying the address
space. To do this cleanly, the detach has to happen in
adreno_gpu_cleanup() because it needs access to structs
in adreno_gpu.c. Plus it is better symmetry to have
the attach and detach at the same code level.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
4 macros already defined in hdmi.h,
which is not required to redefine in hdmi_audio.c
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
'SSPP_MAX + 1' is the max number of hwpipes that can be present on a
MDP5 platform. Recently, 2 new cursor hwpipes were added, which
caused overflows in arrays that used SSPP_MAX to represent the number
of elements. Update the SSPP_MAX value to incorporate the extra
hwpipes.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
A recent commit introduces a bug in dsi_mgr_phy_enable. In the non
dual DSI mode, we reset the mdsi (master DSI) PHY. This isn't right
since master and slave DSI exist only in dual DSI mode. For the normal
mode of operation, we should simply reset the PHY of the DSI device
(i.e. msm_dsi) corresponding to the current bridge.
Usage of the wrong DSI pointer also resulted in a static checker
warning. That too is resolved with this fix.
Fixes: b62aa70a98 (drm/msm/dsi: Move PHY operations out of host)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Zero sized buffer objects tend to make various bits of the GEM
infrastructure complain:
WARNING: CPU: 1 PID: 2323 at drivers/gpu/drm/drm_mm.c:389 drm_mm_insert_node_generic+0x258/0x2f0
Modules linked in:
CPU: 1 PID: 2323 Comm: drm-api-test Tainted: G W 4.9.0-rc4-00906-g693af44 #213
Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
task: ffff8000d7353400 task.stack: ffff8000d7720000
PC is at drm_mm_insert_node_generic+0x258/0x2f0
LR is at drm_vma_offset_add+0x4c/0x70
Zero sized buffers serve no appreciable value to the user so disallow
them at create time.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Instead of checking for a5xx_gpu->gpmu_iova during destroy we
accidently check a5xx_gpu->gpmu_bo.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The newly added a5xx support fails to build when debugfs is diabled:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:11: error: 'a5xx_show' undeclared here (not in a function); did you mean 'a5xx_irq'?
This adds a missing #ifdef.
Fixes: b5f103ab98 ("drm/msm: gpu: Add A5XX target support")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Pull s390 fixes from Martin Schwidefsky:
"Four bug fixes, two of them for stable:
- avoid initrd corruptions in the kernel decompressor
- prevent inconsistent dumps if the boot CPU does not have address
zero
- fix the new pkey interface added with the merge window for 4.11
- a fix for a fix, another issue with user copy zero padding"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/uaccess: get_user() should zero on failure (again)
s390/pkey: Fix wrong handling of secure key with old MKVP
s390/smp: fix ipl from cpu with non-zero address
s390/decompressor: fix initrd corruption caused by bss clear
Pull RAS fix from Thomas Gleixner:
"Prevent dmesg from being spammed when MCE logging is active"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Don't print MCEs when mcelog is active
Make sure to reserve the boot memory for the flattened device tree.
Otherwise it might get overwritten, e.g. when initial_boot_params is
copied, leading to a corrupted FDT and a boot hang/crash:
bootconsole [early0] enabled
Early console on uart16650 initialized at 0xf8001600
OF: fdt: Error -11 processing FDT
Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!
---[ end Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!
Guenter Roeck says:
> I think I found the problem. In unflatten_and_copy_device_tree(), with added
> debug information:
>
> OF: fdt: initial_boot_params=c861e400, dt=c861f000 size=28874 (0x70ca)
>
> ... and then initial_boot_params is copied to dt, which results in corrupted
> fdt since the memory overlaps. Looks like the initial_boot_params memory
> is not reserved and (re-)allocated by early_init_dt_alloc_memory_arch().
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reference: http://lkml.kernel.org/r/20170226210338.GA19476@roeck-us.net
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Pull dmaengine fixes from Vinod Koul:
"A couple of minor fixes for 4.11:
- array bound fix for __get_unmap_pool()
- cyclic period splitting for bcm2835"
* tag 'dmaengine-fix-4.11-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
dmaengine: bcm2835: Fix cyclic DMA period splitting
Pull x86 fixes from Thomas Gleixner:
"This update provides:
- prevent KASLR from randomizing EFI regions
- restrict the usage of -maccumulate-outgoing-args and document when
and why it is required.
- make the Global Physical Address calculation for UV4 systems work
correctly.
- address a copy->paste->forgot-edit problem in the MCE exception
table entries.
- assign a name to AMD MCA bank 3, so the sysfs file registration
works.
- add a missing include in the boot code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Include missing header file
x86/mce/AMD: Give a name to MCA bank 3 when accessed with legacy MSRs
x86/build: Mostly disable '-maccumulate-outgoing-args'
x86/mm/KASLR: Exclude EFI region from KASLR VA space randomization
x86/mce: Fix copy/paste error in exception table entries
x86/platform/uv: Fix calculation of Global Physical Address
Pull scheduler fixes from Thomas Gleixner:
"This update provides:
- make the scheduler clock switch to unstable mode smooth so the
timestamps stay at microseconds granularity instead of switching to
tick granularity.
- unbreak perf test tsc by taking the new offset into account which
was added in order to proveide better sched clock continuity
- switching sched clock to unstable mode runs all clock related
computations which affect the sched clock output itself from a work
queue. In case of preemption sched clock uses half updated data and
provides wrong timestamps. Keep the math in the protected context
and delegate only the static key switch to workqueue context.
- remove a duplicate header include"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/headers: Remove duplicate #include <linux/sched/debug.h> line
sched/clock: Fix broken stable to unstable transfer
sched/clock, x86/perf: Fix "perf test tsc"
sched/clock: Fix clear_sched_clock_stable() preempt wobbly
Pull EFI fix from Thomas Gleixner:
"Downgrade the missing ESRT header printk to warning level and remove a
useless error printk which just generates noise for no value"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/esrt: Cleanup bad memory map log messages
Pull timer fixes from Thomas Gleixner:
"Two small fixes for the new CLKEVT_OF infrastructure"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vmlinux.lds: Add __clkevt_of_table to kernel
clockevents: Fix syntax error in clkevt-of macro
Pull irq fixes from Thomas Gleixner:
"Two small fixlets:
- select a required Kconfig to make the MVEBU driver compile
- add the missing MIPS local GIC interrupts which prevent drivers to
probe successfully"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Fix Local compare interrupt
irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN
Pull core fix from Thomas Gleixner:
"Prevent leaking kernel memory via /proc/$pid/syscall when the queried
task is not in a syscall"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/syscall: Clear return values when no stack
Pull parisc fixes from Helge Deller:
"Al Viro reported that - in case of read faults - our copy_from_user()
implementation may claim to have copied more bytes than it actually
did. In order to fix this bug and because of the way how gcc optimizes
register usage for inline assembly in C code, we had to replace our
pa_memcpy() function with a pure assembler implementation.
While fixing the memcpy bug we noticed some other issues with our
get_user() and put_user() functions, e.g. nested faults may return
wrong data. This is now fixed by a common fixup handler for
get_user/put_user in the exception handler which additionally makes
generated code smaller and faster.
The third patch is a trivial one-line fix for a patch which went in
during 4.11-rc and which avoids stalled CPU warnings after power
shutdown (for parisc machines which can't plug power off themselves).
Due to the rewrite of pa_memcpy() into assembly this patch got bigger
than what I wanted to have sent at this stage.
Those patches have been running in production during the last few days
on our debian build servers without any further issues"
* 'parisc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid stalled CPU warnings after system shutdown
parisc: Clean up fixup routines for get_user()/put_user()
parisc: Fix access fault handling in pa_memcpy()
Pull SCSI fixes from James Bottomley:
"Thirteen small fixes: The hopefully final effort to get the lpfc nvme
kconfig problems sorted, there's one important sg fix (user can induce
read after end of buffer) and one minor enhancement (adding an extra
PCI ID to qedi). The rest are a set of minor fixes, which mostly occur
as user visible in error legs or on specific devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: remove the duplicated checking for supporting clkscaling
scsi: lpfc: fix building without debugfs support
scsi: lpfc: Fix PT2PT PRLI reject
scsi: hpsa: fix volume offline state
scsi: libsas: fix ata xfer length
scsi: scsi_dh_alua: Warn if the first argument of alua_rtpg_queue() is NULL
scsi: scsi_dh_alua: Ensure that alua_activate() calls the completion function
scsi: scsi_dh_alua: Check scsi_device_get() return value
scsi: sg: check length passed to SG_NEXT_CMD_LEN
scsi: ufshcd-platform: remove the useless cast in ERR_PTR/IS_ERR
scsi: qedi: Add PCI device-ID for QL41xxx adapters.
scsi: aacraid: Fix potential null access
scsi: qla2xxx: Fix crash in qla2xxx_eh_abort on bad ptr
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: do not sanitize kexec purgatory
drivers/rapidio/devices/tsi721.c: make module parameter variable name unique
mm/hugetlb.c: don't call region_abort if region_chg fails
kasan: report only the first error by default
hugetlbfs: initialize shared policy as part of inode allocation
mm: fix section name for .data..ro_after_init
mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd()
mm: workingset: fix premature shadow node shrinking with cgroups
mm: rmap: fix huge file mmap accounting in the memcg stats
mm: move mm_percpu_wq initialization earlier
mm: migrate: fix remove_migration_pte() for ksm pages
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 4.11-rc5.
The usual xhci fixes are here, as well as a fix for yet-another-bug-
found-by-KASAN, those developers are doing great stuff here.
And there's a phy build warning fix that showed up in 4.11-rc1.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled
xhci: Manually give back cancelled URB if we can't queue it for cancel
xhci: Set URB actual length for stopped control transfers
xhci: plat: Register shutdown for xhci_plat
USB: fix linked-list corruption in rh_call_control()
Pull tty/serial fixes from Greg KH:
"Here are some small fixes for some serial drivers and Kconfig help
text for 4.11-rc5. Nothing major here at all, a few things resolving
reported bugs in some random serial drivers.
I don't think these made the last linux-next due to me getting to them
yesterday, but I am not sure, they might have snuck in. The patches
only affect drivers that the maintainers of sent me these patches for,
so we should be safe here :)"
* tag 'tty-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: pl011: fix earlycon work-around for QDF2400 erratum 44
serial: 8250_EXAR: fix duplicate Kconfig text and add missing help text
tty/serial: atmel: fix TX path in atmel_console_write()
tty/serial: atmel: fix race condition (TX+DMA)
serial: mxs-auart: Fix baudrate calculation
Pull ACPI fixes from Rafael Wysocki:
"These fix two issues related to IOAPIC hotplug, an overzealous build
optimization that prevents the function graph tracer from working with
the ACPI subsystem correctly and an RCU synchronization issue in the
ACPI APEI code.
Specifics:
- drop the unconditional setting of the '-Os' gcc flag from the ACPI
Makefile to make the function graph tracer work correctly with the
ACPI subsystem (Josh Poimboeuf).
- add missing synchronize_rcu() to ghes_remove() which removes an
element from an RCU-protected list, but fails to synchronize it
properly afterward (James Morse).
- fix two problems related to IOAPIC hotplug, a local variable
initialization in setup_res() and the creation of platform device
objects for IO(x)APICs which are (a) unused and (b) leaked on
hot-removal (Joerg Roedel)"
* tag 'acpi-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Fix incompatibility with mcount-based function graph tracing
ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal
ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
ACPI: ioapic: Clear on-stack resource before using it
