Currently rqt_size is initialized during device flag configuration.
That's because it is the earliest moment when device knows if MQ
(multi queue) is on or off.
Shift this configuration earlier to device creation time. This implies
that non-MQ devices will have a larger RQT size. But the configuration
will still be correct.
This is done in preparation for the pre-creation of hardware virtqueues
at device add time. When that change will be added, RQT will be created
at device creation time so it needs to be initialized to its max size.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-13-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtqueue size is a pre-requisite for setting up any virtqueue
resources. For the upcoming optimization of creating virtqueues at
device add, the virtqueue size has to be configured.
The queue size check in setup_vq() will always be false. So remove it.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-12-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The hardware VQ configuration is mirrored by data in struct
mlx5_vdpa_virtqueue . Instead of clearing just a few fields at reset,
fully clear the struct and initialize with the appropriate default
values.
As clear_vqs_ready() is used only during reset, get rid of it.
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-8-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio spec says that a vdpa device should start off with one queue
pair. The driver is already compliant.
This patch moves the initialization to device add and reset times. This
is done in preparation for the pre-creation of hardware virtqueues at
device add time.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240626-stage-vdpa-vq-precreate-v2-7-560c491078df@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Currently, when the Virtio queue is full, a work item is scheduled
to execute in 1ms that retries adding the request to the queue.
This is a large amount of time on the scale on which a
virtio-fs device can operate. When using a DPU this is around
30-40us baseline without going to a remote server (4k, QD=1).
This patch changes the retrying behavior to immediately filling the
Virtio queue up again when a completion has been received.
This reduces the 99.9th percentile latencies in our tests by
60x and slightly increases the overall throughput, when using a
workload IO depth 2x the size of the Virtio queue and a
DPU-powered virtio-fs device (NVIDIA BlueField DPU).
Signed-off-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Yoray Zack <yorayz@nvidia.com>
Message-Id: <20240517190435.152096-3-pgootzen@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, when the enqueueing of a request or forget operation fails
with -ENOMEM, the enqueueing is retried after a timeout. This patch
removes this behavior and treats -ENOMEM in these scenarios like any
other error. By bubbling up the error to user space in the case of a
request, and by dropping the operation in case of a forget. This
behavior matches that of the FUSE layer above, and also simplifies the
error handling. The latter will come in handy for upcoming patches that
optimize the retrying of operations in case of -ENOSPC.
Signed-off-by: Peter-Jan Gootzen <pgootzen@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Yoray Zack <yorayz@nvidia.com>
Message-Id: <20240517190435.152096-2-pgootzen@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/vdpa/vdpa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/vdpa/ifcvf/ifcvf.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Message-Id: <20240611-md-drivers-vdpa-v1-1-efaf2de15152@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With ARCH=sh, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio_ring.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Message-Id: <20240702-md-sh-drivers-virtio-v1-1-cf7325ab6ccc@quicinc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All callers of vhost_get_avail_idx() use smp_rmb() to
order the available ring entry read and avail_idx read.
Make vhost_get_avail_idx() call smp_rmb() itself whenever the avail_idx
is accessed. This way, the callers don't need to worry about the memory
barrier. As a side benefit, we also validate the index on all paths now,
which will hopefully help prevent/catch earlier future bugs.
Note that current code is inconsistent in how the errors are handled.
They are treated as an empty ring in some places, but as non-empty
ring in other places. This patch doesn't attempt to change the existing
behaviour.
No functional change intended.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Message-Id: <20240429232748.642356-1-gshan@redhat.com>
All the VM events related statistics have dependence on
'CONFIG_VM_EVENT_COUNTERS', separate these events into a function to
make code clean. Then we can remove 'CONFIG_VM_EVENT_COUNTERS' from
'update_balloon_stats'.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20240423034109.1552866-2-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
This commit introduces a new vDPA driver specifically designed for
managing the virtio control plane over the vDPA bus for OCTEON DPU
devices. The driver consists of two layers:
1. Octep HW Layer (Octeon Endpoint): Responsible for handling hardware
operations and configurations related to the DPU device.
2. Octep Main Layer: Compliant with the vDPA bus framework, this layer
implements device operations for the vDPA bus. It handles device
probing, bus attachment, vring operations, and other relevant tasks.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240614144659.1776067-1-schalla@marvell.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are two issues around seqpacket_allow:
1. seqpacket_allow is not initialized when socket is
created. Thus if features are never set, it will be
read uninitialized.
2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared,
then seqpacket_allow will not be cleared appropriately
(existing apps I know about don't usually do this but
it's legal and there's no way to be sure no one relies
on this).
To fix:
- initialize seqpacket_allow after allocation
- set it unconditionally in set_features
Reported-by: syzbot+6c21aeb59d0e82eb2782@syzkaller.appspotmail.com
Reported-by: Jeongjun Park <aha310510@gmail.com>
Fixes: ced7b71371 ("vhost/vsock: support SEQPACKET for transport").
Tested-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240422100010-mutt-send-email-mst@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Pull kselftest fixes from Shuah Khan:
"One single patch to fix the non-contiguous CBM resctrl:
- AMD supports non-contiguous CBM but does not report it via CPUID.
This test should not use CPUID on AMD to detect non-contiguous CBM
support. Fix the problem so the test uses CPUID to discover
non-contiguous CBM support only on Intel"
* tag 'linux_kselftest-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/resctrl: Fix non-contiguous CBM for AMD
Pull vfs fixes from Christian Brauner:
"VFS:
- Improve handling of deep ancestor chains in is_subdir()
- Release locks cleanly when fctnl_setlk() races with close().
When setting a file lock fails the VFS tries to cleanup the already
created lock. The helper used for this calls back into the LSM
layer which may cause it to fail, leaving the stale lock accessible
via /proc/locks.
AFS:
- Fix a comma/semicolon typo"
* tag 'vfs-6.10-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Convert comma to semicolon
fs: better handle deep ancestor chains in is_subdir()
filelock: Remove locks reliably when fcntl/close race is detected
Jan reported that 'cd ..' may take a long time in deep directory
hierarchies under a bind-mount. If concurrent renames happen it is
possible to livelock in is_subdir() because it will keep retrying.
Change is_subdir() from simply retrying over and over to retry once and
then acquire the rename lock to handle deep ancestor chains better. The
list of alternatives to this approach were less then pleasant. Change
the scope of rcu lock to cover the whole walk while at it.
A big thanks to Jan and Linus. Both Jan and Linus had proposed
effectively the same thing just that one version ended up being slightly
more elegant.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull erofs fixes from Gao Xiang:
"The most important one fixes possible infinite loops reported by a
smartphone vendor OPPO recently due to some unexpected zero-sized
compressed pcluster out of interrupted I/Os, storage failures, etc.
Another patch fixes global buffer memory leak on unloading, and the
remaining one switches to use super_set_uuid() to keep with the other
filesystems.
Summary:
- Fix possible global buffer memory leak when unloading EROFS module
- Fix FS_IOC_GETFSUUID ioctl by using super_set_uuid()
- Reset m_llen to 0 so then it can retry if metadata is invalid"
* tag 'erofs-for-6.10-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: ensure m_llen is reset to 0 if metadata is invalid
erofs: convert to use super_set_uuid to support for FS_IOC_GETFSUUID
erofs: fix possible memory leak in z_erofs_gbuf_exit()
When fcntl_setlk() races with close(), it removes the created lock with
do_lock_file_wait().
However, LSMs can allow the first do_lock_file_wait() that created the lock
while denying the second do_lock_file_wait() that tries to remove the lock.
In theory (but AFAIK not in practice), posix_lock_file() could also fail to
remove a lock due to GFP_KERNEL allocation failure (when splitting a range
in the middle).
After the bug has been triggered, use-after-free reads will occur in
lock_get_status() when userspace reads /proc/locks. This can likely be used
to read arbitrary kernel memory, but can't corrupt kernel memory.
This only affects systems with SELinux / Smack / AppArmor / BPF-LSM in
enforcing mode and only works from some security contexts.
Fix it by calling locks_remove_posix() instead, which is designed to
reliably get rid of POSIX locks associated with the given file and
files_struct and is also used by filp_flush().
Fixes: c293621bbf ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240702-fs-lock-recover-2-v1-1-edd456f63789@google.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pull SCSI fixes from James Bottomley:
"A couple of error leg problems, one affecting scsi_debug and the other
affecting pure SAS (i.e. not SATA) SCSI expanders"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed
scsi: scsi_debug: Fix create target debugfs failure
Pull cxl fixes from Dave Jiang:
- Fix no cxl_nvd during pmem region auto-assemble
- Avoid NULLL pointer dereference in region lookup
- Add missing checks to interleave capability
- Add cxl kdoc fix to address document compilation error
* tag 'cxl-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: documentation: add missing files to cxl driver-api
cxl/region: check interleave capability
cxl/region: Avoid null pointer dereference in region lookup
cxl/mem: Fix no cxl_nvd during pmem region auto-assembling
Pull btrfs fix from David Sterba:
"A fixup for a recent fix that prevents an infinite loop during block
group reclaim.
Unfortunately it introduced an unsafe way of updating block group list
and could race with relocation. This could be hit on fast devices when
relocation/balance does not have enough space"
* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix adding block group to a reclaim list and the unused list during reclaim
Pull asm-generic fix from Arnd Bergmann:
"This fixes up a last minute build regression from the previous set of
bug fixes"
* tag 'asm-generic-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix sys_fanotify_mark prototype
Pull SoC fixes from Arnd Bergmann:
"A number of devicetree fixes came in for the rockchip platforms,
correcting some of the address information, and reverting a change to
the MMC controller configuration that caused regressions.
Four drivers have one code change each, addressing minor build issues
for the optee firmware driver, the litex SoC platform driver and two
reset drivers.
The riscv fixes as also simple, mainly turning off device nodes in the
canaan dts files unless they are actually usable on a particular
board.
Finally, Drew takes over maintaining the THEAD RISC-V SoC platform"
* tag 'arm-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
drivers/soc/litex: drop obsolete dependency on COMPILE_TEST
tee: optee: ffa: Fix missing-field-initializers warning
arm64: dts: rockchip: Add sound-dai-cells for RK3368
arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B
reset: hisilicon: hi6220: add missing MODULE_DESCRIPTION() macro
reset: gpio: Fix missing gpiolib dependency for GPIO reset controller
MAINTAINERS: thead: update Maintainer
arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E
riscv: dts: starfive: Set EMMC vqmmc maximum voltage to 3.3V on JH7110 boards
arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A
Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes"
ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node
arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru
arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger
riscv: dts: canaan: Disable I/O devices unless used
riscv: dts: canaan: Clean up serial aliases
arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s
arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s
arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names
arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B
Pull mtd fixes from Miquel Raynal:
- Rockchip NAND controller driver was not checking the timings properly
and the introduction of NV-DDR support broke it.
- The core was also misbehaving in some very specific cases: in case of
(unlikely) bitflips in the parameter page, the fallback might have
failed as well but for software reasons.
- Finally, the chosen ECC configuration was no longer properly
propagated to upper layers, mostly failing an info message at probe
time.
* tag 'mtd/fixes-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: rockchip: ensure NVDDR timings are rejected
mtd: rawnand: Bypass a couple of sanity checks during NAND identification
mtd: rawnand: Fix the nand_read_data_op() early check
mtd: rawnand: Ensure ECC configuration is propagated to upper layers
Pull vfs fixes from Christian Brauner:
"Misc:
- Don't misleadingly warn during filesystem thaw operations.
It's possible that a block device which was frozen before it was
mounted can cause a failing thaw operation if someone concurrently
tried to mount it while that thaw operation was issued and the
device had already been temporarily claimed for the mount (The
mount will of course be aborted because the device is frozen).
netfs:
- Fix io_uring based write-through. Make sure that the total request
length is correctly set.
- Fix partial writes to folio tail.
- Remove some xarray helpers that were intended for bounce buffers
which got defered to a later patch series.
- Make netfs_page_mkwrite() whether folio->mapping is vallid after
acquiring the folio lock.
- Make netfs_page_mkrite() flush conflicting data instead of waiting.
fsnotify:
- Ensure that fsnotify creation events are generated before fsnotify
open events when a file is created via ->atomic_open(). The
ordering was broken before.
- Ensure that no fsnotify events are generated for O_PATH file
descriptors. While no fsnotify open events were generated, fsnotify
close events were. Make it consistent and don't produce any"
* tag 'vfs-6.10-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix netfs_page_mkwrite() to flush conflicting data, not wait
netfs: Fix netfs_page_mkwrite() to check folio->mapping is valid
netfs: Delete some xarray-wangling functions that aren't used
netfs: Fix early issue of write op on partial write to folio tail
netfs: Fix io_uring based write-through
vfs: generate FS_CREATE before FS_OPEN when ->atomic_open used.
fsnotify: Do not generate events for O_PATH file descriptors
fs: don't misleadingly warn during thaw operations
There is a potential parallel list adding for retrying in
btrfs_reclaim_bgs_work and adding to the unused list. Since the block
group is removed from the reclaim list and it is on a relocation work,
it can be added into the unused list in parallel. When that happens,
adding it to the reclaim list will corrupt the list head and trigger
list corruption like below.
Fix it by taking fs_info->unused_bgs_lock.
[177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104
[177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0)
[177.529][T2585409] ------------[ cut here ]------------
[177.537][T2585409] kernel BUG at lib/list_debug.c:65!
[177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
[177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1
[177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022
[177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs]
[177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72
[177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286
[177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000
[177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40
[177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08
[177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0
[177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000
[177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000
[177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0
[177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000
[177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400
[177.742][T2585409] PKRU: 55555554
[177.748][T2585409] Call Trace:
[177.753][T2585409] <TASK>
[177.759][T2585409] ? __die_body.cold+0x19/0x27
[177.766][T2585409] ? die+0x2e/0x50
[177.772][T2585409] ? do_trap+0x1ea/0x2d0
[177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.788][T2585409] ? do_error_trap+0xa3/0x160
[177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.805][T2585409] ? handle_invalid_op+0x2c/0x40
[177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.820][T2585409] ? exc_invalid_op+0x2d/0x40
[177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20
[177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72
[177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs]
There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is
safe, AFAICS. Since the block group was in the unused list, the used bytes
should be 0 when it was added to the unused list. Then, it checks
block_group->{used,reserved,pinned} are still 0 under the
block_group->lock. So, they should be still eligible for the unused list,
not the reclaim list.
The reason it is safe there it's because because we're holding
space_info->groups_sem in write mode.
That means no other task can allocate from the block group, so while we
are at deleted_unused_bgs() it's not possible for other tasks to
allocate and deallocate extents from the block group, so it can't be
added to the unused list or the reclaim list by anyone else.
The bug can be reproduced by btrfs/166 after a few rounds. In practice
this can be hit when relocation cannot find more chunk space and ends
with ENOSPC.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Suggested-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Fixes: 4eb4e85c4f ("btrfs: retry block group reclaim without infinite loop")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
My earlier fix missed an incorrect function prototype that shows up on
native 32-bit builds:
In file included from fs/notify/fanotify/fanotify_user.c:14:
include/linux/syscalls.h:248:25: error: conflicting types for 'sys_fanotify_mark'; have 'long int(int, unsigned int, u32, u32, int, const char *)' {aka 'long int(int, unsigned int, unsigned int, unsigned int, int, const char *)'}
1924 | SYSCALL32_DEFINE6(fanotify_mark,
| ^~~~~~~~~~~~~~~~~
include/linux/syscalls.h:862:17: note: previous declaration of 'sys_fanotify_mark' with type 'long int(int, unsigned int, u64, int, const char *)' {aka 'long int(int, unsigned int, long long unsigned int, int, const char *)'}
On x86 and powerpc, the prototype is also wrong but hidden in an #ifdef,
so it never caused problems.
Add another alternative declaration that matches the conditional function
definition.
Fixes: 403f17a330 ("parisc: use generic sys_fanotify_mark implementation")
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Apart from the regular dts fixes for wrong addresses, missing
or wrong properties, this reverts the previous move away from
cd-gpios to the mmc-controller's internal card-detect.
With this change applied, it was reported that boards could not
detect card anymore, so this go reverted of course.
* tag 'v6.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add sound-dai-cells for RK3368
arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B
arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E
arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A
Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes"
ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node
arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru
arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger
arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s
arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s
arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names
arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B
Link: https://lore.kernel.org/r/10237789.nnTZe4vzsl@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull ata fixes from Niklas Cassel:
- Add NOLPM quirk for for all Crucial BX SSD1 models.
Considering that we now have had bug reports for 3 different BX SSD1
variants from Crucial with the same product name, make the quirk more
inclusive, to catch more device models from the same generation.
- Fix a trivial NULL pointer dereference in the error path for
ata_host_release().
- Create a ata_port_free(), so that we don't miss freeing ata_port
struct members when freeing a struct ata_port.
- Fix a trivial double free in the error path for ata_host_alloc().
- Ensure that we remove the libata "remapped NVMe device count" sysfs
entry on .probe() error.
* tag 'ata-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Clean up sysfs file on error
ata: libata-core: Fix double free on error
ata,scsi: libata-core: Do not leak memory for ata_port struct members
ata: libata-core: Fix null pointer dereference on error
ata: libata-core: Add ATA_HORKAGE_NOLPM for all Crucial BX SSD1 models
.probe() (ahci_init_one()) calls sysfs_add_file_to_group(), however,
if probe() fails after this call, we currently never call
sysfs_remove_file_from_group().
(The sysfs_remove_file_from_group() call in .remove() (ahci_remove_one())
does not help, as .remove() is not called on .probe() error.)
Thus, if probe() fails after the sysfs_add_file_to_group() call, the next
time we insmod the module we will get:
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/remapped_nvme'
CPU: 11 PID: 954 Comm: modprobe Not tainted 6.10.0-rc5 #43
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
sysfs_warn_dup.cold+0x17/0x23
sysfs_add_file_mode_ns+0x11a/0x130
sysfs_add_file_to_group+0x7e/0xc0
ahci_init_one+0x31f/0xd40 [ahci]
Fixes: 894fba7f43 ("ata: ahci: Add sysfs attribute to show remapped NVMe device count")
Cc: stable@vger.kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240629124210.181537-10-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
libsas is currently not freeing all the struct ata_port struct members,
e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL).
Add a function, ata_port_free(), that is used to free a ata_port,
including its struct members. It makes sense to keep the code related to
freeing a ata_port in its own function, which will also free all the
struct members of struct ata_port.
Fixes: 18bd7718b5 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Pull Kbuild fixes from Masahiro Yamada:
- Remove the executable bit from installed DTB files
- Escape $ in subshell execution in the debian-orig target
- Fix RPM builds with CONFIG_MODULES=n
- Fix xconfig with the O= option
- Fix scripts_gdb with the O= option
* tag 'kbuild-fixes-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: scripts/gdb: bring the "abspath" back
kbuild: Use $(obj)/%.cc to fix host C++ module builds
kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n
kbuild: Fix build target deb-pkg: ln: failed to create hard link
kbuild: doc: Update default INSTALL_MOD_DIR from extra to updates
kbuild: Install dtb files as 0644 in Makefile.dtbinst
