Rework fbdev probing to support fbdev_probe in struct drm_driver
and reimplement the old fb_probe callback on top of it. Provide an
initializer macro for struct drm_driver that sets the callback
according to the kernel configuration.
This change allows the common fbdev client to run on top of DMA-
based DRM drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-6-tzimmermann@suse.de
DRM may support multiple in-kernel clients that run as soon as a DRM
driver has been registered. To select the client(s) in a single place,
introduce drm_client_setup().
Drivers that call the new helper automatically instantiate the kernel's
configured default clients. Only fbdev emulation is currently supported.
Later versions can add support for DRM-based logging, a boot logo or even
a console.
Some drivers handle the color mode for clients internally. Provide the
helper drm_client_setup_with_color_mode() for them.
Using the new interface requires the driver to select
DRM_CLIENT_SELECTION in its Kconfig. For now this only enables the
client-setup helpers if the fbdev client has been configured by the
user. A future patchset will further modularize client support and
rework DRM_CLIENT_SELECTION to select the correct dependencies for
all its clients.
v5:
- add CONFIG_DRM_CLIENT_SELECTION und DRM_CLIENT_SETUP
v4:
- fix docs for drm_client_setup_with_fourcc() (Geert)
v3:
- fix build error
v2:
- add drm_client_setup_with_fourcc() (Laurent)
- push default-format handling into actual clients
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-5-tzimmermann@suse.de
Add an fbdev client that can work with any memory manager. The
client implementation is the same as existing code in fbdev-dma or
fbdev-shmem.
Provide struct drm_driver.fbdev_probe for the new client to allocate
the surface GEM buffer. The new callback replaces fb_probe of struct
drm_fb_helper_funcs, which does the same.
To use the new client, DRM drivers set fbdev_probe in their struct
drm_driver instance and call drm_fbdev_client_setup(). Probing and
creating the fbdev surface buffer is now independent from the other
operations in struct drm_fb_helper. For the pixel format, the fbdev
client either uses a specified format, the value in preferred_depth
or 32-bit RGB.
v2:
- test for struct drm_fb_helper.funcs for NULL (Sui)
- respect struct drm_mode_config.preferred_depth for default format
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-4-tzimmermann@suse.de
Call vga_switcheroo_client_fb_set() with the PCI device from the
instance of struct fb_info. All fbdev clients now run these calls.
For non-PCI devices or drivers without vga-switcheroo, this does
nothing. For i915 and radeon, it allows these drivers to use a
common fbdev client.
The device is the same as the one stored in struct drm_client and
struct drm_fb_helper, so there is no difference in behavior. Some
NULL-pointer checks are being removed, where those pointers cannot
be NULL.
v4:
- clarify call semantics for drm_fb_helper_unregister_info() (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-3-tzimmermann@suse.de
Commit 4c27ac45e6 ("gpu: host1x: Request syncpoint IRQs only during
probe") caused a boot regression for the Tegra186 device. Following this
update the function host1x_intr_init() now calls
host1x_hw_intr_disable_all_syncpt_intrs() during probe. However,
host1x_intr_init() is called before runtime power-management is enabled
for Host1x and the function host1x_hw_intr_disable_all_syncpt_intrs() is
accessing hardware registers. So if the Host1x hardware is not enabled
prior to probing then the device will now hang on attempting to access
the registers. So far this is only observed on Tegra186, but potentially
could be seen on other devices.
Fix this by moving the call to the function host1x_intr_init() in probe
to after enabling the runtime power-management in the probe and update
the failure path in probe as necessary.
Fixes: 4c27ac45e6 ("gpu: host1x: Request syncpoint IRQs only during probe")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240925160504.60221-1-jonathanh@nvidia.com
Expose allowed group priorities with a new device query.
This new uAPI will be used in Mesa to properly report what priorities a
user can use for EGL_IMG_context_priority.
Since this extends the uAPI and because userland needs a way to
advertise priorities accordingly, this also bumps the driver minor
version.
v2:
- Remove drm_panthor_group_allow_priority_flags definition
- Document that allowed_mask is a bitmask of drm_panthor_group_priority
v3:
- Use BIT macro in panthor_query_group_priorities_info
- Add r-b from Steven Price and Boris Brezillon
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909064820.34982-4-mary.guillemard@collabora.com
Although Big/Super Pages could appear naturally, it would be quite hard
to have 1MB or 64KB allocated contiguously naturally. Therefore, we can
force the creation of large pages allocated contiguously by using a
mountpoint with "huge=within_size" enabled.
Therefore, as V3D has a mountpoint with "huge=within_size" (if user has
THP enabled), use this mountpoint for BO creation if available. This
will allow us to create large pages allocated contiguously and make use
of Big/Super Pages.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-10-mcanal@igalia.com
The V3D MMU also supports 64KB and 1MB pages, called big and super pages,
respectively. In order to set a 64KB page or 1MB page in the MMU, we need
to make sure that page table entries for all 4KB pages within a big/super
page must be correctly configured.
In order to create a big/super page, we need a contiguous memory region.
That's why we use a separate mountpoint with THP enabled. In order to
place the page table entries in the MMU, we iterate over the 16 4KB pages
(for big pages) or 256 4KB pages (for super pages) and insert the PTE.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-9-mcanal@igalia.com
Currently, we are using an alignment of 128 kB to insert a node, which
ends up wasting memory as we perform plenty of small BOs allocations
(<= 4 kB). We require that allocations are aligned to 128Kb so for any
allocation smaller than that, we are wasting the difference.
This implies that we cannot effectively use the whole 4 GB address space
available for the GPU in the RPi 4. Currently, we can allocate up to
32000 BOs of 4 kB (~140 MB) and 3000 BOs of 400 kB (~1,3 GB). This can be
quite limiting for applications that have a high memory requirement, such
as vkoverhead [1].
By reducing the page alignment to 4 kB, we can allocate up to 1000000 BOs
of 4 kB (~4 GB) and 10000 BOs of 400 kB (~4 GB). Moreover, by performing
benchmarks, we were able to attest that reducing the page alignment to
4 kB can provide a general performance improvement in OpenGL
applications (e.g. glmark2).
Therefore, this patch reduces the alignment of the node allocation to 4
kB, which will allow RPi users to explore the whole 4GB virtual
address space provided by the hardware. Also, this patch allow users to
fully run vkoverhead in the RPi 4/5, solving the issue reported in [1].
[1] https://github.com/zmike/vkoverhead/issues/14
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-8-mcanal@igalia.com
For some applications, such as applications that uses huge pages, we might
want to have a different mountpoint, for which we pass mount flags that
better match our usecase.
Therefore, create a new function `drm_gem_object_init_with_mnt()` that
allow us to define the tmpfs mountpoint where the GEM object will be
created. If this parameter is NULL, then we fallback to `shmem_file_setup()`.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-5-mcanal@igalia.com
We must first flush the MMU cache and then, flush the TLB, not the other
way around. Currently, we can see a race condition between the MMU cache
and the TLB when running multiple rendering processes at the same time.
This is evidenced by MMU errors triggered by the IRQ.
Fix the MMU flush order by flushing the MMU cache and then the TLB.
Also, in order to address the race condition, wait for the MMU cache flush
to finish before starting the TLB flush.
Fixes: 57692c94dc ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-2-mcanal@igalia.com
