Linux 3.4

Pull PA-RISC fixes from James Bottomley:
 "This is a set of three bug fixes that gets parisc running again on
  systems with PA1.1 processors.

  Two fix regressions introduced in 2.6.39 and one fixes a prefetch bug
  that only affects PA7300LC processors.  We also have another pending
  fix to do with the sectional arrangement of vmlinux.lds, but there's a
  query on it during testing on one particular system type, so I'll hold
  off sending it in for now."

* tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
  [PARISC] fix panic on prefetch(NULL) on PA7300LC
  [PARISC] fix crash in flush_icache_page_asm on PA1.1
  [PARISC] fix PA1.1 oops on boot

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -1,10 +1,10 @@
-* Calxeda SATA Controller
+* AHCI SATA Controller
 
 SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci"
+- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
@@ -14,4 +14,3 @@ Example:
                 reg = <0xffe08000 0x1000>;
                 interrupts = <115>;
         };
-

Documentation/devicetree/bindings/sound/sgtl5000.txt

@@ -3,6 +3,8 @@
 Required properties:
 - compatible : "fsl,sgtl5000".
 
+- reg : the I2C address of the device
+
 Example:
 
 codec: sgtl5000@0a {

Documentation/feature-removal-schedule.txt

@@ -539,3 +539,13 @@ When:	3.6
 Why:	setitimer is not returning -EFAULT if user pointer is NULL. This
 	violates the spec.
 Who:	Sasikantha Babu <sasikanth.v19@gmail.com>
+
+----------------------------
+
+What:	V4L2_CID_HCENTER, V4L2_CID_VCENTER V4L2 controls
+When:	3.7
+Why:	The V4L2_CID_VCENTER, V4L2_CID_HCENTER controls have been deprecated
+	for about 4 years and they are not used by any mainline driver.
+	There are newer controls (V4L2_CID_PAN*, V4L2_CID_TILT*) that provide
+	similar	functionality.
+Who:	Sylwester Nawrocki <sylvester.nawrocki@gmail.com>

Documentation/networking/ip-sysctl.txt

@@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
 	Possible values are [-31, 31], inclusive.
-	Default: 2
+	Default: 1
 
 tcp_allowed_congestion_control - STRING
 	Show/set the congestion control choices available to non-privileged
@@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
 	automatic tuning of that socket's receive buffer size, in which
 	case this value is ignored.
-	Default: between 87380B and 4MB, depending on RAM size.
+	Default: between 87380B and 6MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).

MAINTAINERS

@@ -1968,10 +1968,9 @@ S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
 
 CPU FREQUENCY DRIVERS
-M:	Dave Jones <davej@redhat.com>
+M:	Rafael J. Wysocki <rjw@sisk.pl>
 L:	cpufreq@vger.kernel.org
-W:	http://www.codemonkey.org.uk/projects/cpufreq/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
+L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
@@ -4037,6 +4036,7 @@ F:	Documentation/scsi/53c700.txt
 F:	drivers/scsi/53c700*
 
 LED SUBSYSTEM
+M:	Bryan Wu <bryan.wu@canonical.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 F:	drivers/leds/
@@ -5892,11 +5892,11 @@ F:	Documentation/scsi/st.txt
 F:	drivers/scsi/st*
 
 SCTP PROTOCOL
-M:	Vlad Yasevich <vladislav.yasevich@hp.com>
+M:	Vlad Yasevich <vyasevich@gmail.com>
 M:	Sridhar Samudrala <sri@us.ibm.com>
 L:	linux-sctp@vger.kernel.org
 W:	http://lksctp.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	Documentation/networking/sctp.txt
 F:	include/linux/sctp.h
 F:	include/net/sctp/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
@@ -442,7 +442,7 @@ asm-generic:
 
 no-dot-config-targets := clean mrproper distclean \
 			 cscope gtags TAGS tags help %docs check% coccicheck \
-			 include/linux/version.h headers_% archheaders \
+			 include/linux/version.h headers_% archheaders archscripts \
 			 kernelversion %src-pkg
 
 config-targets := 0
@@ -979,7 +979,7 @@ prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
                    include/config/auto.conf
 	$(cmd_crmodverdir)
 
-archprepare: archheaders prepare1 scripts_basic
+archprepare: archheaders archscripts prepare1 scripts_basic
 
 prepare0: archprepare FORCE
 	$(Q)$(MAKE) $(build)=.
@@ -1049,8 +1049,11 @@ hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
 PHONY += archheaders
 archheaders:
 
+PHONY += archscripts
+archscripts:
+
 PHONY += __headers
-__headers: include/linux/version.h scripts_basic asm-generic archheaders FORCE
+__headers: include/linux/version.h scripts_basic asm-generic archheaders archscripts FORCE
 	$(Q)$(MAKE) $(build)=scripts build_unifdef
 
 PHONY += headers_install_all

arch/alpha/Kconfig

@@ -477,7 +477,7 @@ config ALPHA_BROKEN_IRQ_MASK
 
 config VGA_HOSE
 	bool
-	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI
+	depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
 	default y
 	help
 	  Support VGA on an arbitrary hose; needed for several platforms

arch/alpha/include/asm/rtc.h

@@ -1,14 +1,10 @@
 #ifndef _ALPHA_RTC_H
 #define _ALPHA_RTC_H
 
-#if defined(CONFIG_ALPHA_GENERIC)
+#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \
+ || defined(CONFIG_ALPHA_GENERIC)
 # define get_rtc_time		alpha_mv.rtc_get_time
 # define set_rtc_time		alpha_mv.rtc_set_time
-#else
-# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
-#  define get_rtc_time		marvel_get_rtc_time
-#  define set_rtc_time		marvel_set_rtc_time
-# endif
 #endif
 
 #include <asm-generic/rtc.h>

arch/alpha/kernel/core_tsunami.c

@@ -11,6 +11,7 @@
 #include <asm/core_tsunami.h>
 #undef __EXTERN_INLINE
 
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>

arch/alpha/kernel/sys_marvel.c

@@ -317,7 +317,7 @@ marvel_init_irq(void)
 }
 
 static int 
-marvel_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pci_controller *hose = dev->sysdata;
 	struct io7_port *io7_port = hose->sysdata;

arch/arm/Kconfig

@@ -1186,6 +1186,15 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_326103
+	bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
+	depends on CPU_V6
+	help
+	  Executing a SWP instruction to read-only memory does not set bit 11
+	  of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
+	  treat the access as a read, preventing a COW from occurring and
+	  causing the faulting task to livelock.
+
 config ARM_ERRATA_411920
 	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
 	depends on CPU_V6 || CPU_V6K

arch/arm/boot/dts/versatile-ab.dts

@@ -173,7 +173,7 @@
 			mmc@5000 {
 				compatible = "arm,primecell";
 				reg = < 0x5000 0x1000>;
-				interrupts = <22>;
+				interrupts = <22 34>;
 			};
 			kmi@6000 {
 				compatible = "arm,pl050", "arm,primecell";

arch/arm/boot/dts/versatile-pb.dts

@@ -41,7 +41,7 @@
 			mmc@b000 {
 				compatible = "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts = <23>;
+				interrupts = <23 34>;
 			};
 		};
 	};

arch/arm/include/asm/thread_info.h

@@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *);
 extern void vfp_sync_hwstate(struct thread_info *);
 extern void vfp_flush_hwstate(struct thread_info *);
 
+struct user_vfp;
+struct user_vfp_exc;
+
+extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
+					   struct user_vfp_exc __user *);
+extern int vfp_restore_user_hwstate(struct user_vfp __user *,
+				    struct user_vfp_exc __user *);
 #endif
 
 /*

arch/arm/include/asm/tls.h

@@ -7,6 +7,8 @@
 
 	.macro set_tls_v6k, tp, tmp1, tmp2
 	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	mov	\tmp1, #0
+	mcr	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	.endm
 
 	.macro set_tls_v6, tp, tmp1, tmp2
@@ -15,6 +17,8 @@
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	movne	\tmp1, #0
+	mcrne	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
 

arch/arm/kernel/irq.c

@@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	}
 
 	c = irq_data_get_irq_chip(d);
-	if (c->irq_set_affinity)
-		c->irq_set_affinity(d, affinity, true);
-	else
+	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+		cpumask_copy(d->affinity, affinity);
 
 	return ret;
 }

arch/arm/kernel/ptrace.c

@@ -906,27 +906,14 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
-#ifdef __ARMEB__
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
-#else
-#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
-#endif
-
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
 
-	/*
-	 * Save IP.  IP is used to denote syscall entry/exit:
-	 *  IP = 0 -> entry, = 1 -> exit
-	 */
-	ip = regs->ARM_ip;
-	regs->ARM_ip = why;
-
-	if (!ip)
+	if (why)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
@@ -936,6 +923,13 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 
 	current_thread_info()->syscall = scno;
 
+	/*
+	 * IP is used to denote syscall entry/exit:
+	 * IP = 0 -> entry, =1 -> exit
+	 */
+	ip = regs->ARM_ip;
+	regs->ARM_ip = why;
+
 	/* the 0x80 provides a way for the tracing parent to distinguish
 	   between a syscall stop and SIGTRAP delivery */
 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)

arch/arm/kernel/signal.c

@@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
 
 static int preserve_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	const unsigned long magic = VFP_MAGIC;
 	const unsigned long size = VFP_STORAGE_SIZE;
 	int err = 0;
 
-	vfp_sync_hwstate(thread);
 	__put_user_error(magic, &frame->magic, err);
 	__put_user_error(size, &frame->size, err);
 
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
-			      sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
+	if (err)
+		return -EFAULT;
 
-	/*
-	 * Copy the exception registers.
-	 */
-	__put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
-	__put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
-	return err ? -EFAULT : 0;
+	return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 static int restore_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	unsigned long magic;
 	unsigned long size;
-	unsigned long fpexc;
 	int err = 0;
 
 	__get_user_error(magic, &frame->magic, err);
@@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
-	vfp_flush_hwstate(thread);
-
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
-				sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Sanitise and restore the exception registers.
-	 */
-	__get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
-	/* Ensure the VFP is enabled. */
-	fpexc |= FPEXC_EN;
-	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
-	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
-	h->fpexc = fpexc;
-
-	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
-	return err ? -EFAULT : 0;
+	return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 #endif

arch/arm/kernel/smp.c

@@ -251,8 +251,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu = smp_processor_id();
 
-	printk("CPU%u: Booted secondary processor\n", cpu);
-
 	/*
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
@@ -264,6 +262,8 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	enter_lazy_tlb(mm, current);
 	local_flush_tlb_all();
 
+	printk("CPU%u: Booted secondary processor\n", cpu);
+
 	cpu_init();
 	preempt_disable();
 	trace_hardirqs_off();
@@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu)
 	local_fiq_disable();
 	local_irq_disable();
 
-#ifdef CONFIG_HOTPLUG_CPU
-	platform_cpu_kill(cpu);
-#endif
-
 	while (1)
 		cpu_relax();
 }
@@ -576,17 +572,25 @@ void smp_send_reschedule(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static void smp_kill_cpus(cpumask_t *mask)
+{
+	unsigned int cpu;
+	for_each_cpu(cpu, mask)
+		platform_cpu_kill(cpu);
+}
+#else
+static void smp_kill_cpus(cpumask_t *mask) { }
+#endif
+
 void smp_send_stop(void)
 {
 	unsigned long timeout;
+	struct cpumask mask;
 
-	if (num_online_cpus() > 1) {
-		struct cpumask mask;
-		cpumask_copy(&mask, cpu_online_mask);
-		cpumask_clear_cpu(smp_processor_id(), &mask);
-
-		smp_cross_call(&mask, IPI_CPU_STOP);
-	}
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+	smp_cross_call(&mask, IPI_CPU_STOP);
 
 	/* Wait up to one second for other CPUs to stop */
 	timeout = USEC_PER_SEC;
@@ -595,6 +599,8 @@ void smp_send_stop(void)
 
 	if (num_online_cpus() > 1)
 		pr_warning("SMP: failed to stop secondary CPUs\n");
+
+	smp_kill_cpus(&mask);
 }
 
 /*

arch/arm/kernel/sys_arm.c

@@ -115,7 +115,7 @@ int kernel_execve(const char *filename,
 		  "Ir" (THREAD_START_SP - sizeof(regs)),
 		  "r" (&regs),
 		  "Ir" (sizeof(regs))
-		: "r0", "r1", "r2", "r3", "ip", "lr", "memory");
+		: "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory");
 
  out:
 	return ret;

arch/arm/mach-exynos/Kconfig

@@ -232,6 +232,9 @@ config MACH_ARMLEX4210
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
 	select CPU_EXYNOS4210
+	select S5P_HRT
+	select CLKSRC_MMIO
+	select HAVE_SCHED_CLOCK
 	select S5P_GPIO_INT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1

arch/arm/mach-exynos/clock-exynos5.c

@@ -678,7 +678,7 @@ static struct clk exynos5_clk_pdma1 = {
 	.name		= "dma",
 	.devname	= "dma-pl330.1",
 	.enable		= exynos5_clk_ip_fsys_ctrl,
-	.ctrlbit	= (1 << 1),
+	.ctrlbit	= (1 << 2),
 };
 
 static struct clk exynos5_clk_mdma1 = {

arch/arm/mach-exynos/mach-universal_c210.c

@@ -40,6 +40,7 @@
 #include <plat/pd.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/fimc-core.h>
+#include <plat/s5p-time.h>
 #include <plat/camport.h>
 #include <plat/mipi_csis.h>
 
@@ -1063,6 +1064,7 @@ static void __init universal_map_io(void)
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
+	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }
 
 static void s5p_tv_setup(void)
@@ -1113,7 +1115,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.map_io		= universal_map_io,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
-	.timer		= &exynos4_timer,
+	.timer		= &s5p_timer,
 	.reserve        = &universal_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-kirkwood/board-dt.c

@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/kexec.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/bridge-regs.h>

arch/arm/mach-omap1/ams-delta-fiq.c

@@ -48,7 +48,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
 	struct irq_chip *irq_chip = NULL;
 	int gpio, irq_num, fiq_count;
 
-	irq_desc = irq_to_desc(IH_GPIO_BASE);
+	irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
 	if (irq_desc)
 		irq_chip = irq_desc->irq_data.chip;
 

arch/arm/mach-omap2/board-igep0020.c

@@ -641,7 +641,7 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 
 static void __init igep_init(void)
 {
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+	regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	/* Get IGEP2 hardware revision */

arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h

@@ -941,10 +941,10 @@
 #define OMAP4_DSI2_LANEENABLE_MASK				(0x7 << 29)
 #define OMAP4_DSI1_LANEENABLE_SHIFT				24
 #define OMAP4_DSI1_LANEENABLE_MASK				(0x1f << 24)
-#define OMAP4_DSI2_PIPD_SHIFT					19
-#define OMAP4_DSI2_PIPD_MASK					(0x1f << 19)
-#define OMAP4_DSI1_PIPD_SHIFT					14
-#define OMAP4_DSI1_PIPD_MASK					(0x1f << 14)
+#define OMAP4_DSI1_PIPD_SHIFT					19
+#define OMAP4_DSI1_PIPD_MASK					(0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT					14
+#define OMAP4_DSI2_PIPD_MASK					(0x1f << 14)
 
 /* CONTROL_MCBSPLP */
 #define OMAP4_ALBCTRLRX_FSX_SHIFT				31

arch/arm/mach-orion5x/mpp.h

@@ -65,8 +65,8 @@
 #define MPP8_GIGE               MPP(8,  0x1, 0, 0, 1,   1,   1)
 
 #define MPP9_UNUSED		MPP(9,  0x0, 0, 0, 1,   1,   1)
-#define MPP9_GPIO		MPP(9,  0x0, 0, 0, 1,   1,   1)
-#define MPP9_GIGE               MPP(9,  0x1, 1, 1, 1,   1,   1)
+#define MPP9_GPIO		MPP(9,  0x0, 1, 1, 1,   1,   1)
+#define MPP9_GIGE               MPP(9,  0x1, 0, 0, 1,   1,   1)
 
 #define MPP10_UNUSED		MPP(10, 0x0, 0, 0, 1,   1,   1)
 #define MPP10_GPIO		MPP(10, 0x0, 1, 1, 1,   1,   1)

arch/arm/mach-prima2/irq.c

@@ -42,7 +42,8 @@ sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 static __init void sirfsoc_irq_init(void)
 {
 	sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32);
-	sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32, SIRFSOC_INTENAL_IRQ_END - 32);
+	sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32,
+			SIRFSOC_INTENAL_IRQ_END + 1 - 32);
 
 	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
 	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
@@ -68,7 +69,8 @@ void __init sirfsoc_of_irq_init(void)
 	if (!sirfsoc_intc_base)
 		panic("unable to map intc cpu registers\n");
 
-	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
+	irq_domain_add_legacy(np, SIRFSOC_INTENAL_IRQ_END + 1, 0, 0,
+		&irq_domain_simple_ops, NULL);
 
 	of_node_put(np);
 

arch/arm/mach-shmobile/board-ag5evm.c

@@ -365,23 +365,13 @@ static struct platform_device mipidsi0_device = {
 };
 
 /* SDHI0 */
-static irqreturn_t ag5evm_sdhi0_gpio_cd(int irq, void *arg)
-{
-	struct device *dev = arg;
-	struct sh_mobile_sdhi_info *info = dev->platform_data;
-	struct tmio_mmc_data *pdata = info->pdata;
-
-	tmio_mmc_cd_wakeup(pdata);
-
-	return IRQ_HANDLED;
-}
-
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
+	.cd_gpio	= GPIO_PORT251,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -557,7 +547,6 @@ static void __init ag5evm_init(void)
 	lcd_backlight_reset();
 
 	/* enable SDHI0 on CN15 [SD I/F] */
-	gpio_request(GPIO_FN_SDHICD0, NULL);
 	gpio_request(GPIO_FN_SDHIWP0, NULL);
 	gpio_request(GPIO_FN_SDHICMD0, NULL);
 	gpio_request(GPIO_FN_SDHICLK0, NULL);
@@ -566,13 +555,6 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
-	if (!request_irq(intcs_evt2irq(0x3c0), ag5evm_sdhi0_gpio_cd,
-			 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			 "sdhi0 cd", &sdhi0_device.dev))
-		sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
-	else
-		pr_warn("Unable to setup SDHI0 GPIO IRQ\n");
-
 	/* enable SDHI1 on CN4 [WLAN I/F] */
 	gpio_request(GPIO_FN_SDHICLK1, NULL);
 	gpio_request(GPIO_FN_SDHICMD1_PU, NULL);

arch/arm/mach-shmobile/board-mackerel.c

@@ -1011,21 +1011,12 @@ static int slot_cn7_get_cd(struct platform_device *pdev)
 }
 
 /* SDHI0 */
-static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg)
-{
-	struct device *dev = arg;
-	struct sh_mobile_sdhi_info *info = dev->platform_data;
-	struct tmio_mmc_data *pdata = info->pdata;
-
-	tmio_mmc_cd_wakeup(pdata);
-
-	return IRQ_HANDLED;
-}
-
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.tmio_flags	= TMIO_MMC_USE_GPIO_CD,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+	.cd_gpio	= GPIO_PORT172,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -1384,7 +1375,6 @@ static void __init mackerel_init(void)
 {
 	u32 srcr4;
 	struct clk *clk;
-	int ret;
 
 	/* External clock source */
 	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
@@ -1481,7 +1471,6 @@ static void __init mackerel_init(void)
 	irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
 
 	/* enable SDHI0 */
-	gpio_request(GPIO_FN_SDHICD0, NULL);
 	gpio_request(GPIO_FN_SDHIWP0, NULL);
 	gpio_request(GPIO_FN_SDHICMD0, NULL);
 	gpio_request(GPIO_FN_SDHICLK0, NULL);
@@ -1490,13 +1479,6 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
-	ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd,
-			  IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev);
-	if (!ret)
-		sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD;
-	else
-		pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret);
-
 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
 	/* enable SDHI1 */
 	gpio_request(GPIO_FN_SDHICMD1, NULL);

arch/arm/mach-shmobile/headsmp.S

@@ -16,6 +16,59 @@
 
 	__CPUINIT
 
+/* Cache invalidation nicked from arch/arm/mach-imx/head-v7.S, thanks!
+ *
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor.  We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0	@ invalidate I cache
+	mcr	p15, 2, r0, c0, c0, 0
+	mrc	p15, 1, r0, c0, c0, 0
+
+	ldr	r1, =0x7fff
+	and	r2, r1, r0, lsr #13
+
+	ldr	r1, =0x3ff
+
+	and	r3, r1, r0, lsr #3	@ NumWays - 1
+	add	r2, r2, #1		@ NumSets
+
+	and	r0, r0, #0x7
+	add	r0, r0, #4	@ SetShift
+
+	clz	r1, r3		@ WayShift
+	add	r4, r3, #1	@ NumWays
+1:	sub	r2, r2, #1	@ NumSets--
+	mov	r3, r4		@ Temp = NumWays
+2:	subs	r3, r3, #1	@ Temp--
+	mov	r5, r3, lsl r1
+	mov	r6, r2, lsl r0
+	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, r5, c7, c6, 2
+	bgt	2b
+	cmp	r2, #0
+	bgt	1b
+	dsb
+	isb
+	mov	pc, lr
+ENDPROC(v7_invalidate_l1)
+
+ENTRY(shmobile_invalidate_start)
+	bl	v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(shmobile_invalidate_start)
+
 /*
  * Reset vector for secondary CPUs.
  * This will be mapped at address 0 by SBAR register.
@@ -24,4 +77,5 @@
 	.align  12
 ENTRY(shmobile_secondary_vector)
 	ldr     pc, 1f
-1:	.long   secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET
+1:	.long   shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
+ENDPROC(shmobile_secondary_vector)

arch/arm/mach-shmobile/include/mach/common.h

@@ -4,7 +4,6 @@
 extern void shmobile_earlytimer_init(void);
 extern struct sys_timer shmobile_timer;
 struct twd_local_timer;
-void shmobile_twd_init(struct twd_local_timer *twd_local_timer);
 extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
 extern int shmobile_platform_cpu_kill(unsigned int cpu);
@@ -82,5 +81,6 @@ extern int r8a7779_platform_cpu_kill(unsigned int cpu);
 extern void r8a7779_secondary_init(unsigned int cpu);
 extern int r8a7779_boot_secondary(unsigned int cpu);
 extern void r8a7779_smp_prepare_cpus(void);
+extern void r8a7779_register_twd(void);
 
 #endif /* __ARCH_MACH_COMMON_H */

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -262,10 +262,14 @@ void __init r8a7779_add_standard_devices(void)
 			    ARRAY_SIZE(r8a7779_late_devices));
 }
 
+/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
+void __init __weak r8a7779_register_twd(void) { }
+
 static void __init r8a7779_earlytimer_init(void)
 {
 	r8a7779_clock_init();
 	shmobile_earlytimer_init();
+	r8a7779_register_twd();
 }
 
 void __init r8a7779_add_early_devices(void)

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -688,10 +688,14 @@ void __init sh73a0_add_standard_devices(void)
 			    ARRAY_SIZE(sh73a0_late_devices));
 }
 
+/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
+void __init __weak sh73a0_register_twd(void) { }
+
 static void __init sh73a0_earlytimer_init(void)
 {
 	sh73a0_clock_init();
 	shmobile_earlytimer_init();
+	sh73a0_register_twd();
 }
 
 void __init sh73a0_add_early_devices(void)

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -64,8 +64,15 @@ static void __iomem *scu_base_addr(void)
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+#ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
 
+void __init r8a7779_register_twd(void)
+{
+	twd_local_timer_register(&twd_local_timer);
+}
+#endif
+
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -84,7 +91,6 @@ unsigned int __init r8a7779_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 
-	shmobile_twd_init(&twd_local_timer);
 	return scu_get_core_count(scu_base);
 }
 

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -42,7 +42,13 @@ static void __iomem *scu_base_addr(void)
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+#ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
+void __init sh73a0_register_twd(void)
+{
+	twd_local_timer_register(&twd_local_timer);
+}
+#endif
 
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
@@ -62,7 +68,6 @@ unsigned int __init sh73a0_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 
-	shmobile_twd_init(&twd_local_timer);
 	return scu_get_core_count(scu_base);
 }
 

arch/arm/mach-shmobile/timer.c

@@ -46,15 +46,6 @@ static void __init shmobile_timer_init(void)
 {
 }
 
-void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer)
-{
-#ifdef CONFIG_HAVE_ARM_TWD
-	int err = twd_local_timer_register(twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-#endif
-}
-
 struct sys_timer shmobile_timer = {
 	.init		= shmobile_timer_init,
 };

arch/arm/mach-tegra/flowctrl.c

@@ -53,10 +53,10 @@ static void flowctrl_update(u8 offset, u32 value)
 
 void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value)
 {
-	return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value);
+	return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value);
 }
 
 void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value)
 {
-	return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value);
+	return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value);
 }

arch/arm/mm/abort-ev6.S

@@ -26,18 +26,23 @@ ENTRY(v6_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 /*
- * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103).
- * The test below covers all the write situations, including Java bytecodes
+ * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR.
  */
-	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
-	tst	r5, #PSR_J_BIT			@ Java?
+#ifdef CONFIG_ARM_ERRATA_326103
+	ldr	ip, =0x4107b36
+	mrc	p15, 0, r3, c0, c0, 0		@ get processor id
+	teq	ip, r3, lsr #4			@ r0 ARM1136?
 	bne	do_DataAbort
-	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
-	ldreq	r3, [r4]			@ read aborted ARM instruction
+	tst	r5, #PSR_J_BIT			@ Java?
+	tsteq	r5, #PSR_T_BIT			@ Thumb?
+	bne	do_DataAbort
+	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
+	ldr	r3, [r4]			@ read aborted ARM instruction
 #ifdef CONFIG_CPU_ENDIAN_BE8
-	reveq	r3, r3
+	rev	r3, r3
 #endif
 	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
+#endif
 	b	do_DataAbort

arch/arm/mm/cache-l2x0.c

@@ -32,6 +32,7 @@ static void __iomem *l2x0_base;
 static DEFINE_RAW_SPINLOCK(l2x0_lock);
 static u32 l2x0_way_mask;	/* Bitmask of active ways */
 static u32 l2x0_size;
+static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
 
 struct l2x0_regs l2x0_saved_regs;
 
@@ -61,12 +62,7 @@ static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
 
-#ifdef CONFIG_PL310_ERRATA_753970
-	/* write to an unmmapped register */
-	writel_relaxed(0, base + L2X0_DUMMY_REG);
-#else
-	writel_relaxed(0, base + L2X0_CACHE_SYNC);
-#endif
+	writel_relaxed(0, base + sync_reg_offset);
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -85,10 +81,13 @@ static inline void l2x0_inv_line(unsigned long addr)
 }
 
 #if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
+static inline void debug_writel(unsigned long val)
+{
+	if (outer_cache.set_debug)
+		outer_cache.set_debug(val);
+}
 
-#define debug_writel(val)	outer_cache.set_debug(val)
-
-static void l2x0_set_debug(unsigned long val)
+static void pl310_set_debug(unsigned long val)
 {
 	writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
 }
@@ -98,7 +97,7 @@ static inline void debug_writel(unsigned long val)
 {
 }
 
-#define l2x0_set_debug	NULL
+#define pl310_set_debug	NULL
 #endif
 
 #ifdef CONFIG_PL310_ERRATA_588369
@@ -331,6 +330,11 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 		else
 			ways = 8;
 		type = "L310";
+#ifdef CONFIG_PL310_ERRATA_753970
+		/* Unmapped register. */
+		sync_reg_offset = L2X0_DUMMY_REG;
+#endif
+		outer_cache.set_debug = pl310_set_debug;
 		break;
 	case L2X0_CACHE_ID_PART_L210:
 		ways = (aux >> 13) & 0xf;
@@ -379,7 +383,6 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	outer_cache.flush_all = l2x0_flush_all;
 	outer_cache.inv_all = l2x0_inv_all;
 	outer_cache.disable = l2x0_disable;
-	outer_cache.set_debug = l2x0_set_debug;
 
 	printk(KERN_INFO "%s cache controller enabled\n", type);
 	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",

arch/arm/mm/fault.c

@@ -247,7 +247,9 @@ good_area:
 	return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
 
 check_stack:
-	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
+	/* Don't allow expansion below FIRST_USER_ADDRESS */
+	if (vma->vm_flags & VM_GROWSDOWN &&
+	    addr >= FIRST_USER_ADDRESS && !expand_stack(vma, addr))
 		goto good_area;
 out:
 	return fault;

arch/arm/mm/init.c

@@ -293,11 +293,11 @@ EXPORT_SYMBOL(pfn_valid);
 #endif
 
 #ifndef CONFIG_SPARSEMEM
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 }
 #else
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 	struct memblock_region *reg;
 

arch/arm/mm/mmu.c

@@ -489,7 +489,8 @@ static void __init build_mem_type_table(void)
 	 */
 	for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 		mem_types[i].prot_pte |= PTE_EXT_AF;
-		mem_types[i].prot_sect |= PMD_SECT_AF;
+		if (mem_types[i].prot_sect)
+			mem_types[i].prot_sect |= PMD_SECT_AF;
 	}
 	kern_pgprot |= PTE_EXT_AF;
 	vecs_pgprot |= PTE_EXT_AF;
@@ -618,8 +619,8 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr,
 	}
 }
 
-static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
-	unsigned long phys, const struct mem_type *type)
+static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
+	unsigned long end, unsigned long phys, const struct mem_type *type)
 {
 	pud_t *pud = pud_offset(pgd, addr);
 	unsigned long next;

arch/arm/plat-omap/dma.c

@@ -916,6 +916,13 @@ void omap_start_dma(int lch)
 			l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
 	l |= OMAP_DMA_CCR_EN;
 
+	/*
+	 * As dma_write() uses IO accessors which are weakly ordered, there
+	 * is no guarantee that data in coherent DMA memory will be visible
+	 * to the DMA device.  Add a memory barrier here to ensure that any
+	 * such data is visible prior to enabling DMA.
+	 */
+	mb();
 	p->dma_write(l, CCR, lch);
 
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
@@ -965,6 +972,13 @@ void omap_stop_dma(int lch)
 		p->dma_write(l, CCR, lch);
 	}
 
+	/*
+	 * Ensure that data transferred by DMA is visible to any access
+	 * after DMA has been disabled.  This is important for coherent
+	 * DMA regions.
+	 */
+	mb();
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
 		char dma_chan_link_map[dma_lch_count];

arch/arm/vfp/vfpmodule.c

@@ -11,12 +11,15 @@
 #include <linux/types.h>
 #include <linux/cpu.h>
 #include <linux/cpu_pm.h>
+#include <linux/hardirq.h>
 #include <linux/kernel.h>
 #include <linux/notifier.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/init.h>
+#include <linux/uaccess.h>
+#include <linux/user.h>
 
 #include <asm/cp15.h>
 #include <asm/cputype.h>
@@ -430,7 +433,10 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 
 static void vfp_enable(void *unused)
 {
-	u32 access = get_copro_access();
+	u32 access;
+
+	BUG_ON(preemptible());
+	access = get_copro_access();
 
 	/*
 	 * Enable full access to VFP (cp10 and cp11)
@@ -528,6 +534,93 @@ void vfp_flush_hwstate(struct thread_info *thread)
 	put_cpu();
 }
 
+/*
+ * Save the current VFP state into the provided structures and prepare
+ * for entry into a new function (signal handler).
+ */
+int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
+				    struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	int err = 0;
+
+	/* Ensure that the saved hwstate is up-to-date. */
+	vfp_sync_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs,
+			      sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__put_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Copy the exception registers.
+	 */
+	__put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err);
+	__put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	if (err)
+		return -EFAULT;
+
+	/* Ensure that VFP is disabled. */
+	vfp_flush_hwstate(thread);
+
+	/*
+	 * As per the PCS, clear the length and stride bits for function
+	 * entry.
+	 */
+	hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK);
+	return 0;
+}
+
+/* Sanitise and restore the current VFP state from the provided structures. */
+int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
+			     struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	unsigned long fpexc;
+	int err = 0;
+
+	/* Disable VFP to avoid corrupting the new thread state. */
+	vfp_flush_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs,
+				sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__get_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Sanitise and restore the exception registers.
+	 */
+	__get_user_error(fpexc, &ufp_exc->fpexc, err);
+
+	/* Ensure the VFP is enabled. */
+	fpexc |= FPEXC_EN;
+
+	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
+	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
+	hwstate->fpexc = fpexc;
+
+	__get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	return err ? -EFAULT : 0;
+}
+
 /*
  * VFP hardware can lose all context when a CPU goes offline.
  * As we will be running in SMP mode with CPU hotplug, we will save the
@@ -558,7 +651,7 @@ static int __init vfp_init(void)
 	unsigned int cpu_arch = cpu_architecture();
 
 	if (cpu_arch >= CPU_ARCH_ARMv6)
-		vfp_enable(NULL);
+		on_each_cpu(vfp_enable, NULL, 1);
 
 	/*
 	 * First check that there is a VFP that we can use.
@@ -579,8 +672,6 @@ static int __init vfp_init(void)
 	} else {
 		hotcpu_notifier(vfp_hotplug, 0);
 
-		smp_call_function(vfp_enable, NULL, 1);
-
 		VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */
 		printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
 			(vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT,

arch/frv/include/asm/processor.h

@@ -135,10 +135,6 @@ unsigned long get_wchan(struct task_struct *p);
 #define	KSTK_EIP(tsk)	((tsk)->thread.frame0->pc)
 #define	KSTK_ESP(tsk)	((tsk)->thread.frame0->sp)
 
-/* Allocation and freeing of basic task resources. */
-extern struct task_struct *alloc_task_struct_node(int node);
-extern void free_task_struct(struct task_struct *p);
-
 #define cpu_relax()    barrier()
 
 /* data cache prefetch */

arch/ia64/kvm/kvm-ia64.c

@@ -1174,7 +1174,7 @@ out:
 
 bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu)
 {
-	return irqchip_in_kernel(vcpu->kcm) == (vcpu->arch.apic != NULL);
+	return irqchip_in_kernel(vcpu->kvm) == (vcpu->arch.apic != NULL);
 }
 
 int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)

arch/m68k/platform/520x/config.c

@@ -22,7 +22,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m520x_qspi_init(void)
 {
@@ -35,7 +35,7 @@ static void __init m520x_qspi_init(void)
 	writew(par, MCF_GPIO_PAR_UART);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -79,7 +79,7 @@ void __init config_BSP(char *commandp, int size)
 	mach_sched_init = hw_timer_init;
 	m520x_uarts_init();
 	m520x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m520x_qspi_init();
 #endif
 }

arch/m68k/platform/523x/config.c

@@ -22,7 +22,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m523x_qspi_init(void)
 {
@@ -36,7 +36,7 @@ static void __init m523x_qspi_init(void)
 	writew(par, MCFGPIO_PAR_TIMER);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -58,7 +58,7 @@ void __init config_BSP(char *commandp, int size)
 {
 	mach_sched_init = hw_timer_init;
 	m523x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m523x_qspi_init();
 #endif
 }

arch/m68k/platform/5249/config.c

@@ -51,7 +51,7 @@ static struct platform_device *m5249_devices[] __initdata = {
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m5249_qspi_init(void)
 {
@@ -61,7 +61,7 @@ static void __init m5249_qspi_init(void)
 	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -90,7 +90,7 @@ void __init config_BSP(char *commandp, int size)
 #ifdef CONFIG_M5249C3
 	m5249_smc91x_init();
 #endif
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m5249_qspi_init();
 #endif
 }

arch/m68k/platform/527x/config.c

@@ -23,7 +23,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m527x_qspi_init(void)
 {
@@ -42,7 +42,7 @@ static void __init m527x_qspi_init(void)
 #endif
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -90,7 +90,7 @@ void __init config_BSP(char *commandp, int size)
 	mach_sched_init = hw_timer_init;
 	m527x_uarts_init();
 	m527x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m527x_qspi_init();
 #endif
 }

arch/m68k/platform/528x/config.c

@@ -24,7 +24,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m528x_qspi_init(void)
 {
@@ -32,7 +32,7 @@ static void __init m528x_qspi_init(void)
 	__raw_writeb(0x07, MCFGPIO_PQSPAR);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -98,7 +98,7 @@ void __init config_BSP(char *commandp, int size)
 	mach_sched_init = hw_timer_init;
 	m528x_uarts_init();
 	m528x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m528x_qspi_init();
 #endif
 }

arch/m68k/platform/532x/config.c

@@ -30,7 +30,7 @@
 
 /***************************************************************************/
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 
 static void __init m532x_qspi_init(void)
 {
@@ -38,7 +38,7 @@ static void __init m532x_qspi_init(void)
 	writew(0x01f0, MCF_GPIO_PAR_QSPI);
 }
 
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 /***************************************************************************/
 
@@ -77,7 +77,7 @@ void __init config_BSP(char *commandp, int size)
 	mach_sched_init = hw_timer_init;
 	m532x_uarts_init();
 	m532x_fec_init();
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	m532x_qspi_init();
 #endif
 

arch/m68k/platform/coldfire/device.c

@@ -121,7 +121,7 @@ static struct platform_device mcf_fec1 = {
 #endif /* MCFFEC_BASE1 */
 #endif /* CONFIG_FEC */
 
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 /*
  *	The ColdFire QSPI module is an SPI protocol hardware block used
  *	on a number of different ColdFire CPUs.
@@ -274,7 +274,7 @@ static struct platform_device mcf_qspi = {
 	.resource		= mcf_qspi_resources,
 	.dev.platform_data	= &mcf_qspi_data,
 };
-#endif /* CONFIG_SPI_COLDFIRE_QSPI */
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
 
 static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_uart,
@@ -284,7 +284,7 @@ static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_fec1,
 #endif
 #endif
-#ifdef CONFIG_SPI_COLDFIRE_QSPI
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
 	&mcf_qspi,
 #endif
 };

arch/mips/ath79/dev-wmac.c

@@ -58,8 +58,8 @@ static void __init ar913x_wmac_setup(void)
 
 static int ar933x_wmac_reset(void)
 {
-	ath79_device_reset_clear(AR933X_RESET_WMAC);
 	ath79_device_reset_set(AR933X_RESET_WMAC);
+	ath79_device_reset_clear(AR933X_RESET_WMAC);
 
 	return 0;
 }

arch/mips/include/asm/mach-jz4740/irq.h

@@ -45,7 +45,7 @@
 #define JZ4740_IRQ_LCD		JZ4740_IRQ(30)
 
 /* 2nd-level interrupts */
-#define JZ4740_IRQ_DMA(x)	(JZ4740_IRQ(32) + (X))
+#define JZ4740_IRQ_DMA(x)	(JZ4740_IRQ(32) + (x))
 
 #define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x))
 #define JZ4740_IRQ_GPIO(x)	(JZ4740_IRQ(48) + (x))

arch/mips/include/asm/mmu_context.h

@@ -37,12 +37,6 @@ extern void tlbmiss_handler_setup_pgd(unsigned long pgd);
 		write_c0_xcontext((unsigned long) smp_processor_id() << 51); \
 	} while (0)
 
-
-static inline unsigned long get_current_pgd(void)
-{
-	return PHYS_TO_XKSEG_CACHED((read_c0_context() >> 11) & ~0xfffUL);
-}
-
 #else /* CONFIG_MIPS_PGD_C0_CONTEXT: using  pgd_current*/
 
 /*

arch/mips/kernel/signal.c

@@ -257,11 +257,8 @@ asmlinkage int sys_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -286,11 +283,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -362,10 +356,7 @@ asmlinkage void sys_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&blocked);
 
 	sig = restore_sigcontext(&regs, &frame->sf_sc);
 	if (sig < 0)
@@ -401,10 +392,7 @@ asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)
@@ -580,12 +568,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	if (ret)
 		return ret;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	return ret;
 }

arch/mips/kernel/signal32.c

@@ -290,11 +290,8 @@ asmlinkage int sys32_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -318,11 +315,8 @@ asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -488,10 +482,7 @@ asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&blocked);
 
 	sig = restore_sigcontext32(&regs, &frame->sf_sc);
 	if (sig < 0)
@@ -529,10 +520,7 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext32(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)

arch/mips/kernel/signal_n32.c

@@ -93,11 +93,8 @@ asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 	sigset_from_compat(&newset, &uset);
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -121,10 +118,7 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)

arch/mn10300/kernel/smp.c

@@ -24,6 +24,7 @@
 #include <linux/sched.h>
 #include <linux/profile.h>
 #include <linux/smp.h>
+#include <linux/cpu.h>
 #include <asm/tlbflush.h>
 #include <asm/bitops.h>
 #include <asm/processor.h>
@@ -38,7 +39,6 @@
 #include "internal.h"
 
 #ifdef CONFIG_HOTPLUG_CPU
-#include <linux/cpu.h>
 #include <asm/cacheflush.h>
 
 static unsigned long sleep_mode[NR_CPUS];
@@ -874,10 +874,13 @@ static void __init smp_online(void)
 
 	cpu = smp_processor_id();
 
-	local_irq_enable();
+	notify_cpu_starting(cpu);
 
+	ipi_call_lock();
 	set_cpu_online(cpu, true);
-	smp_wmb();
+	ipi_call_unlock();
+
+	local_irq_enable();
 }
 
 /**

arch/parisc/include/asm/hardware.h

@@ -2,7 +2,6 @@
 #define _PARISC_HARDWARE_H
 
 #include <linux/mod_devicetable.h>
-#include <asm/pdc.h>
 
 #define HWTYPE_ANY_ID		PA_HWTYPE_ANY_ID
 #define HVERSION_ANY_ID		PA_HVERSION_ANY_ID
@@ -95,12 +94,14 @@ struct bc_module {
 #define HPHW_MC	       15
 #define HPHW_FAULTY    31
 
+struct parisc_device_id;
 
 /* hardware.c: */
 extern const char *parisc_hardware_description(struct parisc_device_id *id);
 extern enum cpu_type parisc_get_cpu_type(unsigned long hversion);
 
 struct pci_dev;
+struct hardware_path;
 
 /* drivers.c: */
 extern struct parisc_device *alloc_pa_dev(unsigned long hpa,

arch/parisc/include/asm/page.h

@@ -160,5 +160,11 @@ extern int npmem_ranges;
 
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
+#include <asm/pdc.h>
+
+#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
+
+/* DEFINITION OF THE ZERO-PAGE (PAG0) */
+/* based on work by Jason Eckhardt (jason@equator.com) */
 
 #endif /* _PARISC_PAGE_H */

arch/parisc/include/asm/pdc.h

@@ -343,8 +343,6 @@
 
 #ifdef __KERNEL__
 
-#include <asm/page.h> /* for __PAGE_OFFSET */
-
 extern int pdc_type;
 
 /* Values for pdc_type */
@@ -677,11 +675,6 @@ static inline char * os_id_to_string(u16 os_id) {
 
 #endif /* __KERNEL__ */
 
-#define PAGE0   ((struct zeropage *)__PAGE_OFFSET)
-
-/* DEFINITION OF THE ZERO-PAGE (PAG0) */
-/* based on work by Jason Eckhardt (jason@equator.com) */
-
 /* flags of the device_path */
 #define	PF_AUTOBOOT	0x80
 #define	PF_AUTOSEARCH	0x40

arch/parisc/include/asm/pgtable.h

@@ -44,6 +44,8 @@ struct vm_area_struct;
 
 #endif /* !__ASSEMBLY__ */
 
+#include <asm/page.h>
+
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
 #define pmd_ERROR(e) \

arch/parisc/include/asm/prefetch.h

@@ -21,7 +21,12 @@
 #define ARCH_HAS_PREFETCH
 static inline void prefetch(const void *addr)
 {
-	__asm__("ldw 0(%0), %%r0" : : "r" (addr));
+	__asm__(
+#ifndef CONFIG_PA20
+		/* Need to avoid prefetch of NULL on PA7300LC */
+		"	extrw,u,= %0,31,32,%%r0\n"
+#endif
+		"	ldw 0(%0), %%r0" : : "r" (addr));
 }
 
 /* LDD is a PA2.0 addition. */

arch/parisc/include/asm/spinlock.h

@@ -1,6 +1,8 @@
 #ifndef __ASM_SPINLOCK_H
 #define __ASM_SPINLOCK_H
 
+#include <asm/barrier.h>
+#include <asm/ldcw.h>
 #include <asm/processor.h>
 #include <asm/spinlock_types.h>
 

arch/parisc/kernel/entry.S

@@ -581,7 +581,11 @@
 	 */
 	cmpiclr,=	0x01,\tmp,%r0
 	ldi		(_PAGE_DIRTY|_PAGE_READ|_PAGE_WRITE),\prot
+#ifdef CONFIG_64BIT
 	depd,z		\prot,8,7,\prot
+#else
+	depw,z		\prot,8,7,\prot
+#endif
 	/*
 	 * OK, it is in the temp alias region, check whether "from" or "to".
 	 * Check "subtle" note in pacache.S re: r23/r26.

arch/parisc/kernel/pacache.S

@@ -692,7 +692,7 @@ ENTRY(flush_icache_page_asm)
 
 	/* Purge any old translation */
 
-	pitlb		(%sr0,%r28)
+	pitlb		(%sr4,%r28)
 
 	ldil		L%icache_stride, %r1
 	ldw		R%icache_stride(%r1), %r1
@@ -706,27 +706,29 @@ ENTRY(flush_icache_page_asm)
 	sub		%r25, %r1, %r25
 
 
-1:      fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
-	fic,m		%r1(%r28)
+	/* fic only has the type 26 form on PA1.1, requiring an
+	 * explicit space specification, so use %sr4 */
+1:      fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
+	fic,m		%r1(%sr4,%r28)
 	cmpb,COND(<<)		%r28, %r25,1b
-	fic,m		%r1(%r28)
+	fic,m		%r1(%sr4,%r28)
 
 	sync
 	bv		%r0(%r2)
-	pitlb		(%sr0,%r25)
+	pitlb		(%sr4,%r25)
 	.exit
 
 	.procend

arch/parisc/kernel/pdc_cons.c

@@ -50,6 +50,7 @@
 #include <linux/init.h>
 #include <linux/major.h>
 #include <linux/tty.h>
+#include <asm/page.h>		/* for PAGE0 */
 #include <asm/pdc.h>		/* for iodc_call() proto and friends */
 
 static DEFINE_SPINLOCK(pdc_console_lock);
@@ -104,7 +105,7 @@ static int pdc_console_tty_open(struct tty_struct *tty, struct file *filp)
 
 static void pdc_console_tty_close(struct tty_struct *tty, struct file *filp)
 {
-	if (!tty->count) {
+	if (tty->count == 1) {
 		del_timer_sync(&pdc_console_timer);
 		tty_port_tty_set(&tty_port, NULL);
 	}

arch/parisc/kernel/smp.c

@@ -31,6 +31,7 @@
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/ftrace.h>
+#include <linux/cpu.h>
 
 #include <linux/atomic.h>
 #include <asm/current.h>
@@ -295,8 +296,13 @@ smp_cpu_init(int cpunum)
 
 		printk(KERN_CRIT "CPU#%d already initialized!\n", cpunum);
 		machine_halt();
-	}  
+	}
+
+	notify_cpu_starting(cpunum);
+
+	ipi_call_lock();
 	set_cpu_online(cpunum, true);
+	ipi_call_unlock();
 
 	/* Initialise the idle task for this CPU */
 	atomic_inc(&init_mm.mm_count);

arch/parisc/kernel/time.c

@@ -29,6 +29,7 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/page.h>
 #include <asm/param.h>
 #include <asm/pdc.h>
 #include <asm/led.h>

arch/powerpc/include/asm/exception-64s.h

@@ -288,13 +288,6 @@ label##_hv:								\
 /* Exception addition: Hard disable interrupts */
 #define DISABLE_INTS	SOFT_DISABLE_INTS(r10,r11)
 
-/* Exception addition: Keep interrupt state */
-#define ENABLE_INTS				\
-	ld	r11,PACAKMSR(r13);		\
-	ld	r12,_MSR(r1);			\
-	rlwimi	r11,r12,0,MSR_EE;		\
-	mtmsrd	r11,1
-
 #define ADD_NVGPRS				\
 	bl	.save_nvgprs
 

arch/powerpc/include/asm/irq.h

@@ -18,10 +18,6 @@
 #include <linux/atomic.h>
 
 
-/* Define a way to iterate across irqs. */
-#define for_each_irq(i) \
-	for ((i) = 0; (i) < NR_IRQS; ++(i))
-
 extern atomic_t ppc_n_lost_interrupts;
 
 /* This number is used when no interrupt has been assigned */

arch/powerpc/include/asm/kvm_book3s.h

@@ -81,12 +81,13 @@ struct kvmppc_vcpu_book3s {
 	u64 sdr1;
 	u64 hior;
 	u64 msr_mask;
-	u64 vsid_next;
 #ifdef CONFIG_PPC_BOOK3S_32
 	u32 vsid_pool[VSID_POOL_SIZE];
+	u32 vsid_next;
 #else
-	u64 vsid_first;
-	u64 vsid_max;
+	u64 proto_vsid_first;
+	u64 proto_vsid_max;
+	u64 proto_vsid_next;
 #endif
 	int context_id[SID_CONTEXTS];
 

arch/powerpc/kernel/entry_64.S

@@ -588,23 +588,19 @@ _GLOBAL(ret_from_except_lite)
 fast_exc_return_irq:
 restore:
 	/*
-	 * This is the main kernel exit path, we first check if we
-	 * have to change our interrupt state.
+	 * This is the main kernel exit path. First we check if we
+	 * are about to re-enable interrupts
 	 */
 	ld	r5,SOFTE(r1)
 	lbz	r6,PACASOFTIRQEN(r13)
-	cmpwi	cr1,r5,0
-	cmpw	cr0,r5,r6
-	beq	cr0,4f
+	cmpwi	cr0,r5,0
+	beq	restore_irq_off
 
-	/* We do, handle disable first, which is easy */
-	bne	cr1,3f;
- 	li	r0,0
-	stb	r0,PACASOFTIRQEN(r13);
-	TRACE_DISABLE_INTS
-	b	4f
+	/* We are enabling, were we already enabled ? Yes, just return */
+	cmpwi	cr0,r6,1
+	beq	cr0,do_restore
 
-3:	/*
+	/*
 	 * We are about to soft-enable interrupts (we are hard disabled
 	 * at this point). We check if there's anything that needs to
 	 * be replayed first.
@@ -626,7 +622,7 @@ restore_no_replay:
 	/*
 	 * Final return path. BookE is handled in a different file
 	 */
-4:
+do_restore:
 #ifdef CONFIG_PPC_BOOK3E
 	b	.exception_return_book3e
 #else
@@ -699,6 +695,25 @@ fast_exception_return:
 
 #endif /* CONFIG_PPC_BOOK3E */
 
+	/*
+	 * We are returning to a context with interrupts soft disabled.
+	 *
+	 * However, we may also about to hard enable, so we need to
+	 * make sure that in this case, we also clear PACA_IRQ_HARD_DIS
+	 * or that bit can get out of sync and bad things will happen
+	 */
+restore_irq_off:
+	ld	r3,_MSR(r1)
+	lbz	r7,PACAIRQHAPPENED(r13)
+	andi.	r0,r3,MSR_EE
+	beq	1f
+	rlwinm	r7,r7,0,~PACA_IRQ_HARD_DIS
+	stb	r7,PACAIRQHAPPENED(r13)
+1:	li	r0,0
+	stb	r0,PACASOFTIRQEN(r13);
+	TRACE_DISABLE_INTS
+	b	do_restore
+
 	/*
 	 * Something did happen, check if a re-emit is needed
 	 * (this also clears paca->irq_happened)
@@ -748,6 +763,9 @@ restore_check_irq_replay:
 #endif /* CONFIG_PPC_BOOK3E */
 1:	b	.ret_from_except /* What else to do here ? */
  
+
+
+3:
 do_work:
 #ifdef CONFIG_PREEMPT
 	andi.	r0,r3,MSR_PR	/* Returning to user mode? */
@@ -767,16 +785,6 @@ do_work:
 	SOFT_DISABLE_INTS(r3,r4)
 1:	bl	.preempt_schedule_irq
 
-	/* Hard-disable interrupts again (and update PACA) */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	0
-#else
-	ld	r10,PACAKMSR(r13) /* Get kernel MSR without EE */
-	mtmsrd	r10,1
-#endif /* CONFIG_PPC_BOOK3E */
-	li	r0,PACA_IRQ_HARD_DIS
-	stb	r0,PACAIRQHAPPENED(r13)
-
 	/* Re-test flags and eventually loop */
 	clrrdi	r9,r1,THREAD_SHIFT
 	ld	r4,TI_FLAGS(r9)
@@ -787,14 +795,6 @@ do_work:
 user_work:
 #endif /* CONFIG_PREEMPT */
 
-	/* Enable interrupts */
-#ifdef CONFIG_PPC_BOOK3E
-	wrteei	1
-#else
-	ori	r10,r10,MSR_EE
-	mtmsrd	r10,1
-#endif /* CONFIG_PPC_BOOK3E */
-
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	beq	1f
 	bl	.restore_interrupts

arch/powerpc/kernel/exceptions-64s.S

@@ -768,8 +768,8 @@ alignment_common:
 	std	r3,_DAR(r1)
 	std	r4,_DSISR(r1)
 	bl	.save_nvgprs
+	DISABLE_INTS
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	ENABLE_INTS
 	bl	.alignment_exception
 	b	.ret_from_except
 

arch/powerpc/kernel/irq.c

@@ -229,6 +229,19 @@ notrace void arch_local_irq_restore(unsigned long en)
 	 */
 	if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
 		__hard_irq_disable();
+#ifdef CONFIG_TRACE_IRQFLAG
+	else {
+		/*
+		 * We should already be hard disabled here. We had bugs
+		 * where that wasn't the case so let's dbl check it and
+		 * warn if we are wrong. Only do that when IRQ tracing
+		 * is enabled as mfmsr() can be costly.
+		 */
+		if (WARN_ON(mfmsr() & MSR_EE))
+			__hard_irq_disable();
+	}
+#endif /* CONFIG_TRACE_IRQFLAG */
+
 	set_soft_enabled(0);
 
 	/*
@@ -260,11 +273,17 @@ EXPORT_SYMBOL(arch_local_irq_restore);
  * if they are currently disabled. This is typically called before
  * schedule() or do_signal() when returning to userspace. We do it
  * in C to avoid the burden of dealing with lockdep etc...
+ *
+ * NOTE: This is called with interrupts hard disabled but not marked
+ * as such in paca->irq_happened, so we need to resync this.
  */
 void restore_interrupts(void)
 {
-	if (irqs_disabled())
+	if (irqs_disabled()) {
+		local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
 		local_irq_enable();
+	} else
+		__hard_irq_enable();
 }
 
 #endif /* CONFIG_PPC64 */
@@ -330,14 +349,10 @@ void migrate_irqs(void)
 
 	alloc_cpumask_var(&mask, GFP_KERNEL);
 
-	for_each_irq(irq) {
+	for_each_irq_desc(irq, desc) {
 		struct irq_data *data;
 		struct irq_chip *chip;
 
-		desc = irq_to_desc(irq);
-		if (!desc)
-			continue;
-
 		data = irq_desc_get_irq_data(desc);
 		if (irqd_is_per_cpu(data))
 			continue;

arch/powerpc/kernel/machine_kexec.c

@@ -23,14 +23,11 @@
 
 void machine_kexec_mask_interrupts(void) {
 	unsigned int i;
+	struct irq_desc *desc;
 
-	for_each_irq(i) {
-		struct irq_desc *desc = irq_to_desc(i);
+	for_each_irq_desc(i, desc) {
 		struct irq_chip *chip;
 
-		if (!desc)
-			continue;
-
 		chip = irq_desc_get_chip(desc);
 		if (!chip)
 			continue;

arch/powerpc/kernel/traps.c

@@ -248,7 +248,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
 				   addr, regs->nip, regs->link, code);
 	}
 
-	if (!arch_irq_disabled_regs(regs))
+	if (arch_irqs_disabled() && !arch_irq_disabled_regs(regs))
 		local_irq_enable();
 
 	memset(&info, 0, sizeof(info));
@@ -1019,7 +1019,9 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 		return;
 	}
 
-	local_irq_enable();
+	/* We restore the interrupt state now */
+	if (!arch_irq_disabled_regs(regs))
+		local_irq_enable();
 
 #ifdef CONFIG_MATH_EMULATION
 	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
@@ -1069,6 +1071,10 @@ void alignment_exception(struct pt_regs *regs)
 {
 	int sig, code, fixed = 0;
 
+	/* We restore the interrupt state now */
+	if (!arch_irq_disabled_regs(regs))
+		local_irq_enable();
+
 	/* we don't implement logging of alignment exceptions */
 	if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS))
 		fixed = fix_alignment(regs);

arch/powerpc/kvm/book3s_64_mmu_host.c

@@ -194,14 +194,14 @@ static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid)
 	backwards_map = !backwards_map;
 
 	/* Uh-oh ... out of mappings. Let's flush! */
-	if (vcpu_book3s->vsid_next == vcpu_book3s->vsid_max) {
-		vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+	if (vcpu_book3s->proto_vsid_next == vcpu_book3s->proto_vsid_max) {
+		vcpu_book3s->proto_vsid_next = vcpu_book3s->proto_vsid_first;
 		memset(vcpu_book3s->sid_map, 0,
 		       sizeof(struct kvmppc_sid_map) * SID_MAP_NUM);
 		kvmppc_mmu_pte_flush(vcpu, 0, 0);
 		kvmppc_mmu_flush_segments(vcpu);
 	}
-	map->host_vsid = vcpu_book3s->vsid_next++;
+	map->host_vsid = vsid_scramble(vcpu_book3s->proto_vsid_next++, 256M);
 
 	map->guest_vsid = gvsid;
 	map->valid = true;
@@ -319,9 +319,10 @@ int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
 		return -1;
 	vcpu3s->context_id[0] = err;
 
-	vcpu3s->vsid_max = ((vcpu3s->context_id[0] + 1) << USER_ESID_BITS) - 1;
-	vcpu3s->vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
-	vcpu3s->vsid_next = vcpu3s->vsid_first;
+	vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1)
+				  << USER_ESID_BITS) - 1;
+	vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
+	vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first;
 
 	kvmppc_mmu_hpte_init(vcpu);
 

arch/powerpc/kvm/book3s_64_mmu_hv.c

@@ -258,6 +258,8 @@ static long kvmppc_get_guest_page(struct kvm *kvm, unsigned long gfn,
 			    !(memslot->userspace_addr & (s - 1))) {
 				start &= ~(s - 1);
 				pgsize = s;
+				get_page(hpage);
+				put_page(page);
 				page = hpage;
 			}
 		}
@@ -281,11 +283,8 @@ static long kvmppc_get_guest_page(struct kvm *kvm, unsigned long gfn,
 	err = 0;
 
  out:
-	if (got) {
-		if (PageHuge(page))
-			page = compound_head(page);
+	if (got)
 		put_page(page);
-	}
 	return err;
 
  up_err:
@@ -678,8 +677,15 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		SetPageDirty(page);
 
  out_put:
-	if (page)
-		put_page(page);
+	if (page) {
+		/*
+		 * We drop pages[0] here, not page because page might
+		 * have been set to the head page of a compound, but
+		 * we have to drop the reference on the correct tail
+		 * page to match the get inside gup()
+		 */
+		put_page(pages[0]);
+	}
 	return ret;
 
  out_unlock:
@@ -979,6 +985,7 @@ void *kvmppc_pin_guest_page(struct kvm *kvm, unsigned long gpa,
 			pa = *physp;
 		}
 		page = pfn_to_page(pa >> PAGE_SHIFT);
+		get_page(page);
 	} else {
 		hva = gfn_to_hva_memslot(memslot, gfn);
 		npages = get_user_pages_fast(hva, 1, 1, pages);
@@ -991,8 +998,6 @@ void *kvmppc_pin_guest_page(struct kvm *kvm, unsigned long gpa,
 		page = compound_head(page);
 		psize <<= compound_order(page);
 	}
-	if (!kvm->arch.using_mmu_notifiers)
-		get_page(page);
 	offset = gpa & (psize - 1);
 	if (nb_ret)
 		*nb_ret = psize - offset;
@@ -1003,7 +1008,6 @@ void kvmppc_unpin_guest_page(struct kvm *kvm, void *va)
 {
 	struct page *page = virt_to_page(va);
 
-	page = compound_head(page);
 	put_page(page);
 }
 

arch/powerpc/kvm/book3s_hv.c

@@ -1192,8 +1192,6 @@ static void unpin_slot(struct kvm *kvm, int slot_id)
 				continue;
 			pfn = physp[j] >> PAGE_SHIFT;
 			page = pfn_to_page(pfn);
-			if (PageHuge(page))
-				page = compound_head(page);
 			SetPageDirty(page);
 			put_page(page);
 		}

arch/powerpc/kvm/book3s_hv_rm_mmu.c

@@ -463,6 +463,7 @@ long kvmppc_h_bulk_remove(struct kvm_vcpu *vcpu)
 				/* insert R and C bits from PTE */
 				rcbits = rev->guest_rpte & (HPTE_R_R|HPTE_R_C);
 				args[j] |= rcbits << (56 - 5);
+				hp[0] = 0;
 				continue;
 			}
 

arch/powerpc/kvm/book3s_segment.S

@@ -197,7 +197,8 @@ kvmppc_interrupt:
 	/* Save guest PC and MSR */
 #ifdef CONFIG_PPC64
 BEGIN_FTR_SECTION
-	andi.	r0,r12,0x2
+	andi.	r0, r12, 0x2
+	cmpwi	cr1, r0, 0
 	beq	1f
 	mfspr	r3,SPRN_HSRR0
 	mfspr	r4,SPRN_HSRR1
@@ -250,6 +251,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	beq	ld_last_prev_inst
 	cmpwi	r12, BOOK3S_INTERRUPT_ALIGNMENT
 	beq-	ld_last_inst
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+	cmpwi	r12, BOOK3S_INTERRUPT_H_EMUL_ASSIST
+	beq-	ld_last_inst
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
+#endif
 
 	b	no_ld_last_inst
 
@@ -316,23 +323,17 @@ no_dcbz32_off:
 	 * Having set up SRR0/1 with the address where we want
 	 * to continue with relocation on (potentially in module
 	 * space), we either just go straight there with rfi[d],
-	 * or we jump to an interrupt handler with bctr if there
-	 * is an interrupt to be handled first.  In the latter
-	 * case, the rfi[d] at the end of the interrupt handler
-	 * will get us back to where we want to continue.
+	 * or we jump to an interrupt handler if there is an
+	 * interrupt to be handled first.  In the latter case,
+	 * the rfi[d] at the end of the interrupt handler will
+	 * get us back to where we want to continue.
 	 */
 
-	cmpwi	r12, BOOK3S_INTERRUPT_EXTERNAL
-	beq	1f
-	cmpwi	r12, BOOK3S_INTERRUPT_DECREMENTER
-	beq	1f
-	cmpwi	r12, BOOK3S_INTERRUPT_PERFMON
-1:	mtctr	r12
-
 	/* Register usage at this point:
 	 *
 	 * R1       = host R1
 	 * R2       = host R2
+	 * R10      = raw exit handler id
 	 * R12      = exit handler id
 	 * R13      = shadow vcpu (32-bit) or PACA (64-bit)
 	 * SVCPU.*  = guest *
@@ -342,12 +343,25 @@ no_dcbz32_off:
 	PPC_LL	r6, HSTATE_HOST_MSR(r13)
 	PPC_LL	r8, HSTATE_VMHANDLER(r13)
 
-	/* Restore host msr -> SRR1 */
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+	beq	cr1, 1f
+	mtspr	SPRN_HSRR1, r6
+	mtspr	SPRN_HSRR0, r8
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
+#endif
+1:	/* Restore host msr -> SRR1 */
 	mtsrr1	r6
 	/* Load highmem handler address */
 	mtsrr0	r8
 
 	/* RFI into the highmem handler, or jump to interrupt handler */
-	beqctr
+	cmpwi	r12, BOOK3S_INTERRUPT_EXTERNAL
+	beqa	BOOK3S_INTERRUPT_EXTERNAL
+	cmpwi	r12, BOOK3S_INTERRUPT_DECREMENTER
+	beqa	BOOK3S_INTERRUPT_DECREMENTER
+	cmpwi	r12, BOOK3S_INTERRUPT_PERFMON
+	beqa	BOOK3S_INTERRUPT_PERFMON
+
 	RFI
 kvmppc_handler_trampoline_exit_end:

arch/powerpc/net/bpf_jit.h

@@ -48,7 +48,13 @@
 /*
  * Assembly helpers from arch/powerpc/net/bpf_jit.S:
  */
-extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
+#define DECLARE_LOAD_FUNC(func)	\
+	extern u8 func[], func##_negative_offset[], func##_positive_offset[]
+
+DECLARE_LOAD_FUNC(sk_load_word);
+DECLARE_LOAD_FUNC(sk_load_half);
+DECLARE_LOAD_FUNC(sk_load_byte);
+DECLARE_LOAD_FUNC(sk_load_byte_msh);
 
 #define FUNCTION_DESCR_SIZE	24
 

arch/powerpc/net/bpf_jit_64.S

@@ -31,14 +31,13 @@
  * then branch directly to slow_path_XXX if required.  (In fact, could
  * load a spare GPR with the address of slow_path_generic and pass size
  * as an argument, making the call site a mtlr, li and bllr.)
- *
- * Technically, the "is addr < 0" check is unnecessary & slowing down
- * the ABS path, as it's statically checked on generation.
  */
 	.globl	sk_load_word
 sk_load_word:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_word_neg
+	.globl	sk_load_word_positive_offset
+sk_load_word_positive_offset:
 	/* Are we accessing past headlen? */
 	subi	r_scratch1, r_HL, 4
 	cmpd	r_scratch1, r_addr
@@ -51,7 +50,9 @@ sk_load_word:
 	.globl	sk_load_half
 sk_load_half:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_half_neg
+	.globl	sk_load_half_positive_offset
+sk_load_half_positive_offset:
 	subi	r_scratch1, r_HL, 2
 	cmpd	r_scratch1, r_addr
 	blt	bpf_slow_path_half
@@ -61,7 +62,9 @@ sk_load_half:
 	.globl	sk_load_byte
 sk_load_byte:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_byte_neg
+	.globl	sk_load_byte_positive_offset
+sk_load_byte_positive_offset:
 	cmpd	r_HL, r_addr
 	ble	bpf_slow_path_byte
 	lbzx	r_A, r_D, r_addr
@@ -69,22 +72,20 @@ sk_load_byte:
 
 /*
  * BPF_S_LDX_B_MSH: ldxb  4*([offset]&0xf)
- * r_addr is the offset value, already known positive
+ * r_addr is the offset value
  */
 	.globl sk_load_byte_msh
 sk_load_byte_msh:
+	cmpdi	r_addr, 0
+	blt	bpf_slow_path_byte_msh_neg
+	.globl sk_load_byte_msh_positive_offset
+sk_load_byte_msh_positive_offset:
 	cmpd	r_HL, r_addr
 	ble	bpf_slow_path_byte_msh
 	lbzx	r_X, r_D, r_addr
 	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
 	blr
 
-bpf_error:
-	/* Entered with cr0 = lt */
-	li	r3, 0
-	/* Generated code will 'blt epilogue', returning 0. */
-	blr
-
 /* Call out to skb_copy_bits:
  * We'll need to back up our volatile regs first; we have
  * local variable space at r1+(BPF_PPC_STACK_BASIC).
@@ -136,3 +137,84 @@ bpf_slow_path_byte_msh:
 	lbz	r_X, BPF_PPC_STACK_BASIC+(2*8)(r1)
 	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
 	blr
+
+/* Call out to bpf_internal_load_pointer_neg_helper:
+ * We'll need to back up our volatile regs first; we have
+ * local variable space at r1+(BPF_PPC_STACK_BASIC).
+ * Allocate a new stack frame here to remain ABI-compliant in
+ * stashing LR.
+ */
+#define sk_negative_common(SIZE)				\
+	mflr	r0;						\
+	std	r0, 16(r1);					\
+	/* R3 goes in parameter space of caller's frame */	\
+	std	r_skb, (BPF_PPC_STACKFRAME+48)(r1);		\
+	std	r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1);		\
+	std	r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1);		\
+	stdu	r1, -BPF_PPC_SLOWPATH_FRAME(r1);		\
+	/* R3 = r_skb, as passed */				\
+	mr	r4, r_addr;					\
+	li	r5, SIZE;					\
+	bl	bpf_internal_load_pointer_neg_helper;		\
+	/* R3 != 0 on success */				\
+	addi	r1, r1, BPF_PPC_SLOWPATH_FRAME;			\
+	ld	r0, 16(r1);					\
+	ld	r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1);		\
+	ld	r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1);		\
+	mtlr	r0;						\
+	cmpldi	r3, 0;						\
+	beq	bpf_error_slow;	/* cr0 = EQ */			\
+	mr	r_addr, r3;					\
+	ld	r_skb, (BPF_PPC_STACKFRAME+48)(r1);		\
+	/* Great success! */
+
+bpf_slow_path_word_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_word_negative_offset
+sk_load_word_negative_offset:
+	sk_negative_common(4)
+	lwz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_half_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_half_negative_offset
+sk_load_half_negative_offset:
+	sk_negative_common(2)
+	lhz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_byte_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_byte_negative_offset
+sk_load_byte_negative_offset:
+	sk_negative_common(1)
+	lbz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_byte_msh_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_byte_msh_negative_offset
+sk_load_byte_msh_negative_offset:
+	sk_negative_common(1)
+	lbz	r_X, 0(r_addr)
+	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
+	blr
+
+bpf_error_slow:
+	/* fabricate a cr0 = lt */
+	li	r_scratch1, -1
+	cmpdi	r_scratch1, 0
+bpf_error:
+	/* Entered with cr0 = lt */
+	li	r3, 0
+	/* Generated code will 'blt epilogue', returning 0. */
+	blr

arch/powerpc/net/bpf_jit_comp.c

@@ -127,6 +127,9 @@ static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
 	PPC_BLR();
 }
 
+#define CHOOSE_LOAD_FUNC(K, func) \
+	((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
+
 /* Assemble the body code between the prologue & epilogue. */
 static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 			      struct codegen_context *ctx,
@@ -391,21 +394,16 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 
 			/*** Absolute loads from packet header/data ***/
 		case BPF_S_LD_W_ABS:
-			func = sk_load_word;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_word);
 			goto common_load;
 		case BPF_S_LD_H_ABS:
-			func = sk_load_half;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_half);
 			goto common_load;
 		case BPF_S_LD_B_ABS:
-			func = sk_load_byte;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_byte);
 		common_load:
-			/*
-			 * Load from [K].  Reference with the (negative)
-			 * SKF_NET_OFF/SKF_LL_OFF offsets is unsupported.
-			 */
+			/* Load from [K]. */
 			ctx->seen |= SEEN_DATAREF;
-			if ((int)K < 0)
-				return -ENOTSUPP;
 			PPC_LI64(r_scratch1, func);
 			PPC_MTLR(r_scratch1);
 			PPC_LI32(r_addr, K);
@@ -429,7 +427,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 		common_load_ind:
 			/*
 			 * Load from [X + K].  Negative offsets are tested for
-			 * in the helper functions, and result in a 'ret 0'.
+			 * in the helper functions.
 			 */
 			ctx->seen |= SEEN_DATAREF | SEEN_XREG;
 			PPC_LI64(r_scratch1, func);
@@ -443,13 +441,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 			break;
 
 		case BPF_S_LDX_B_MSH:
-			/*
-			 * x86 version drops packet (RET 0) when K<0, whereas
-			 * interpreter does allow K<0 (__load_pointer, special
-			 * ancillary data).  common_load returns ENOTSUPP if K<0,
-			 * so we fall back to interpreter & filter works.
-			 */
-			func = sk_load_byte_msh;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh);
 			goto common_load;
 			break;
 

arch/powerpc/platforms/cell/axon_msi.c

@@ -114,7 +114,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 		pr_devel("axon_msi: woff %x roff %x msi %x\n",
 			  write_offset, msic->read_offset, msi);
 
-		if (msi < NR_IRQS && irq_get_chip_data(msi) == msic) {
+		if (msi < nr_irqs && irq_get_chip_data(msi) == msic) {
 			generic_handle_irq(msi);
 			msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
 		} else {
@@ -276,9 +276,6 @@ static int axon_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	if (rc)
 		return rc;
 
-	/* We rely on being able to stash a virq in a u16 */
-	BUILD_BUG_ON(NR_IRQS > 65536);
-
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		virq = irq_create_direct_mapping(msic->irq_domain);
 		if (virq == NO_IRQ) {
@@ -392,7 +389,8 @@ static int axon_msi_probe(struct platform_device *device)
 	}
 	memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
 
-	msic->irq_domain = irq_domain_add_nomap(dn, 0, &msic_host_ops, msic);
+	/* We rely on being able to stash a virq in a u16, so limit irqs to < 65536 */
+	msic->irq_domain = irq_domain_add_nomap(dn, 65536, &msic_host_ops, msic);
 	if (!msic->irq_domain) {
 		printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n",
 		       dn->full_name);

arch/powerpc/platforms/cell/beat_interrupt.c

@@ -248,6 +248,6 @@ void beatic_deinit_IRQ(void)
 {
 	int	i;
 
-	for (i = 1; i < NR_IRQS; i++)
+	for (i = 1; i < nr_irqs; i++)
 		beat_destruct_irq_plug(i);
 }

arch/powerpc/platforms/powermac/pic.c

@@ -57,9 +57,9 @@ static int max_real_irqs;
 
 static DEFINE_RAW_SPINLOCK(pmac_pic_lock);
 
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+/* The max irq number this driver deals with is 128; see max_irqs */
+static DECLARE_BITMAP(ppc_lost_interrupts, 128);
+static DECLARE_BITMAP(ppc_cached_irq_mask, 128);
 static int pmac_irq_cascade = -1;
 static struct irq_domain *pmac_pic_host;
 

arch/powerpc/platforms/pseries/Kconfig

@@ -30,9 +30,9 @@ config PPC_SPLPAR
 	  two or more partitions.
 
 config EEH
-	bool "PCI Extended Error Handling (EEH)" if EXPERT
+	bool
 	depends on PPC_PSERIES && PCI
-	default y if !EXPERT
+	default y
 
 config PSERIES_MSI
        bool

arch/powerpc/sysdev/cpm2_pic.c

@@ -51,8 +51,7 @@
 static intctl_cpm2_t __iomem *cpm2_intctl;
 
 static struct irq_domain *cpm2_pic_host;
-#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+static unsigned long ppc_cached_irq_mask[2]; /* 2 32-bit registers */
 
 static const u_char irq_to_siureg[] = {
 	1, 1, 1, 1, 1, 1, 1, 1,

arch/powerpc/sysdev/mpc8xx_pic.c

@@ -18,69 +18,45 @@
 extern int cpm_get_irq(struct pt_regs *regs);
 
 static struct irq_domain *mpc8xx_pic_host;
-#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+static unsigned long mpc8xx_cached_irq_mask;
 static sysconf8xx_t __iomem *siu_reg;
 
-int cpm_get_irq(struct pt_regs *regs);
+static inline unsigned long mpc8xx_irqd_to_bit(struct irq_data *d)
+{
+	return 0x80000000 >> irqd_to_hwirq(d);
+}
 
 static void mpc8xx_unmask_irq(struct irq_data *d)
 {
-	int	bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static void mpc8xx_mask_irq(struct irq_data *d)
 {
-	int	bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask &= ~mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static void mpc8xx_ack(struct irq_data *d)
 {
-	int	bit;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	out_be32(&siu_reg->sc_sipend, 1 << (31-bit));
+	out_be32(&siu_reg->sc_sipend, mpc8xx_irqd_to_bit(d));
 }
 
 static void mpc8xx_end_irq(struct irq_data *d)
 {
-	int bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type)
 {
-	if (flow_type & IRQ_TYPE_EDGE_FALLING) {
-		irq_hw_number_t hw = (unsigned int)irqd_to_hwirq(d);
+	/* only external IRQ senses are programmable */
+	if ((flow_type & IRQ_TYPE_EDGE_FALLING) && !(irqd_to_hwirq(d) & 1)) {
 		unsigned int siel = in_be32(&siu_reg->sc_siel);
-
-		/* only external IRQ senses are programmable */
-		if ((hw & 1) == 0) {
-			siel |= (0x80000000 >> hw);
-			out_be32(&siu_reg->sc_siel, siel);
-			__irq_set_handler_locked(d->irq, handle_edge_irq);
-		}
+		siel |= mpc8xx_irqd_to_bit(d);
+		out_be32(&siu_reg->sc_siel, siel);
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
 	}
 	return 0;
 }
@@ -132,6 +108,9 @@ static int mpc8xx_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
 		IRQ_TYPE_EDGE_FALLING,
 	};
 
+	if (intspec[0] > 0x1f)
+		return 0;
+
 	*out_hwirq = intspec[0];
 	if (intsize > 1 && intspec[1] < 4)
 		*out_flags = map_pic_senses[intspec[1]];

arch/powerpc/sysdev/xics/xics-common.c

@@ -188,6 +188,7 @@ void xics_migrate_irqs_away(void)
 {
 	int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
 	unsigned int irq, virq;
+	struct irq_desc *desc;
 
 	/* If we used to be the default server, move to the new "boot_cpuid" */
 	if (hw_cpu == xics_default_server)
@@ -202,8 +203,7 @@ void xics_migrate_irqs_away(void)
 	/* Allow IPIs again... */
 	icp_ops->set_priority(DEFAULT_PRIORITY);
 
-	for_each_irq(virq) {
-		struct irq_desc *desc;
+	for_each_irq_desc(virq, desc) {
 		struct irq_chip *chip;
 		long server;
 		unsigned long flags;
@@ -212,9 +212,8 @@ void xics_migrate_irqs_away(void)
 		/* We can't set affinity on ISA interrupts */
 		if (virq < NUM_ISA_INTERRUPTS)
 			continue;
-		desc = irq_to_desc(virq);
 		/* We only need to migrate enabled IRQS */
-		if (!desc || !desc->action)
+		if (!desc->action)
 			continue;
 		if (desc->irq_data.domain != xics_host)
 			continue;

arch/sparc/kernel/central.c

@@ -269,4 +269,4 @@ static int __init sunfire_init(void)
 	return 0;
 }
 
-subsys_initcall(sunfire_init);
+fs_initcall(sunfire_init);

arch/sparc/mm/ultra.S

@@ -495,11 +495,11 @@ xcall_fetch_glob_regs:
 	stx		%o7, [%g1 + GR_SNAP_O7]
 	stx		%i7, [%g1 + GR_SNAP_I7]
 	/* Don't try this at home kids... */
-	rdpr		%cwp, %g2
-	sub		%g2, 1, %g7
+	rdpr		%cwp, %g3
+	sub		%g3, 1, %g7
 	wrpr		%g7, %cwp
 	mov		%i7, %g7
-	wrpr		%g2, %cwp
+	wrpr		%g3, %cwp
 	stx		%g7, [%g1 + GR_SNAP_RPC]
 	sethi		%hi(trap_block), %g7
 	or		%g7, %lo(trap_block), %g7

arch/tile/Kconfig

@@ -11,6 +11,7 @@ config TILE
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_IRQ_SHOW
+	select HAVE_SYSCALL_WRAPPERS if TILEGX
 	select SYS_HYPERVISOR
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 

arch/tile/include/asm/thread_info.h

@@ -100,9 +100,14 @@ extern void cpu_idle_on_new_stack(struct thread_info *old_ti,
 
 #else /* __ASSEMBLY__ */
 
-/* how to get the thread information struct from ASM */
+/*
+ * How to get the thread information struct from assembly.
+ * Note that we use different macros since different architectures
+ * have different semantics in their "mm" instruction and we would
+ * like to guarantee that the macro expands to exactly one instruction.
+ */
 #ifdef __tilegx__
-#define GET_THREAD_INFO(reg) move reg, sp; mm reg, zero, LOG2_THREAD_SIZE, 63
+#define EXTRACT_THREAD_INFO(reg) mm reg, zero, LOG2_THREAD_SIZE, 63
 #else
 #define GET_THREAD_INFO(reg) mm reg, sp, zero, LOG2_THREAD_SIZE, 31
 #endif