This PR adds a feature to merc2 to update vertices. This will be needed
to efficient do effects like blerc/ripple/texture scroll. It's enabled
for blerc in jak 1 and jak 2, but with a few disclaimers:
- currently we still use the mips2c blerc implementation, which is slow
and has some "jittering" because of integer precision. When porting to
PC, there was an additional synchronization problem because blerc
overwrites the merc data as its being read by the renderers. I _think_
this wasn't an issue on PS2 because the blerc dma is higher priority
than the VIF1 DMA, but I'm not certain. Either way, I had to add a mutex
for this on PC to avoid very slight flickering/gaps. This isn't ideal
for performance, but still beats generic by a significant amount in
every place I tested. If you see merc taking 2ms to draw, it is likely
because it is stuck waiting on blerc to finish. This will go away once
blerc itself is ported to C++.
- in jak 1, we end up using generic in some cases where we could use
merc. In particular maia in village3 hut. This will be fixed later once
we can use merc in more places. I don't want to mess with the
merc/generic selection logic when we're hopefully going to get rid of it
soon.
- There is no support for ripple or texture scroll. These use generic on
jak 1, and remain broken on jak 2.
- Like with `emerc`, jak 1 has a toggle to go back to the old behavior
`*blerc-hack*`.
- In most cases, toggling this causes no visual differences. One
exception is Gol's teeth. I believe this is caused by texture coordinate
rounding issues, where generic has an additional float -> int -> float
compared to PC merc. It is very hard to notice so I'm not going to worry
about it.
This adds environment mapping support to `Merc2`, and turns it on for
Jak 1 and Jak 2.
- The performance is much better
- Jak 1 can be toggled back to the old behavior with `(set! *emerc-hack*
#f)`. The new environment mapping is identical to the old one everywhere
I checked.
- Jak 1 still falls back to generic for ripple/texscroll/blerc/eyes -
there's still no dynamic texture or vertex updating support. The eye
detection stuff will sometimes flag stuff as eyes which is not eyes,
which is fine, but means that generic will be used in some places where
emerc could be used. For example, the shiny plates on jak's arm will be
drawn with generic because jak has eyes.
- Jak 2 hasn't been checked super carefully against PCSX2 yet.
- Jak 2 still isn't technically using emerc, but instead putting emerc
models in the merc bucket.
- The interface to merc is a lot different now and totally custom
OpenGOAL DMA code. The original merc drawing asm doesn't run anymore.
- The FR3 format changed
- Something funky going on with foreground lighting in escape, but
doesn't seem to be related to this change?
Performance comparison, jak 1, in likely the most generic-merc heavy
spot:
Initial implementation of the `ocean-mid`, `ocean-far` and `ocean-near`
renderers for Jak 2.
There's still a few things to sort out, mainly:
- [x] ~Backwards compatibility with Jak 1. The only thing that currently
stands in the way of that is figuring out a clean way to "un-hardcode"
the texture base pointer in C++ without creating a completely separate
`OceanTexture` class for Jak 2. One thing I thought of would be
modifying `BucketRenderer`'s virtual `init_textures` method to also pass
the `GameVersion`, but I'm not sure if there's a better way.~
- [x] ~The sudden transition from `ocean-near` to `ocean-mid`. Not sure
why it's happening or how to fix it.~
- [x] The ocean has two new methods in Jak 2, `ocean::89` and
`ocean::79`, one of which seems to be related to time of day sky colors.
~Even without them implemented, the end result looks quite close, so we
may be able to skip them?~ `ocean::89` generates `ocean-mid` envmap
textures, so it will likely be required, but will not be handled right
now.
Reverted the VU prologue removals because it made the tests fail.
Some side missions require cars, they don't work yet. Also the
ring-races and collection ones do not grant orbs. The hoaming beacon
collection one causes a `hud` crash
- make sure bsp is processed on `l` levels in extraction (caused missing
remaps)
- clean up a few prints in extraction
- handle the <15 byte differences in art group files automatically (no
more errors about file naming)
- fix potential exception thrown by merc2 in a few ways: fixed bad data
in FR3's, check texture index just in case, and handle exceptions a
little bit better (still a crash, but at least you get a print)
- fix mips2 ocean stuff causing ocean far crashes
Manual patches in:
- `tomb-boulder`: a few `ppointer->handle`s (I think) were not being
decompiled properly (all used in combination with `clone-anim-once`)
- `ruins-obs`, `pillar-collapse`: `art-joint-anim` casts
- `tomb-beetle`: commented out a call to `shadow-control-method-14` that
was crashing the game when spawning the beetles
- `grunt-mech`: commented out `(.mula.s)` instruction
Notes:
- `enemy-info`'s `idle-anim-script` is most likely a `(pointer
idle-control-frame)`, however, some `nav-enemy-info` labels set it to
`#f` (first encountered in `tomb-beetle`, but also present in `hal`,
`roboguard` and `metalkor-setup`), which crashes the decompiler. This
may become a problem in the future when we eventually get to these
files. For this PR, I made `tomb-beetle` decompile with
`idle-anim-script` set to `#f` and have not noticed any issues/crashes
with that.
- `tomb-boulder` compiles and doesn't crash, but when trying to play the
Daxter chase sequence, the boulder sometimes either spawns at the origin
or spawns in the correct place, but doesn't move.
Co-authored-by: water <awaterford111445@gmail.com>
- worked around audio code for gungame, the tutorials now function
- auto-exit cutscenes upon entry. This doesn't always work nicely (i
didnt want to cause any side-effects due to messing with load states)
but it atleast stops jak from being stuck forever waiting for the
cutscene to load
Adds the following files:
- `amphibian`
- `centurion`
- `ginsu`
- `grenadier`
- `hopper`
- `metalmonk`
- `monster-frog`
- `predator-graph`
- `predator-h`
- `predator`
- `rapid-gunner`
- `rhino`
- `rhino-wall`
- `tomb-baby-spider`
Also adds the DGOs for the following levels:
- Mar's Tomb
- Mountain Temple
- Drill Platform
- Sacred Site (Sage Hut)
Manual patches:
- The decompiler emits `(b! #t cfg-17)` in `(trans hostile hopper)`
without putting a `(label cfg-17)` anywhere
- Added cast to `art-joint-anim` in `(code broken rhino-wall)` and
`(code hit rhino-wall)`
Other notes:
- `amphibian` seems to occasionally crash when using its tongue attack.
Haven't investigated this yet
- `ginsu` crashes after being killed somewhere in the `deactivate`
method, possibly because of its `part-spawner`
- Predators aren't spawning in the forest hunt mission, not sure if
`forest-obs` might be needed for that or if it's something else
- The `rhino-wall` STR animation seems to load (albeit a bit broken due
to missing VAG stream playback), but causes the viewport to shrink as
soon as it's played
- I added `pegasus::74` to the `event_handler_hack` bool in
`variable_naming.cpp` because I got a `none` cast after changing the
return value of `enemy::74`
The things that aren't working right now:
- returning the board (maybe cutscene related?)
- draft until i see if this can be sorted out
- seems to need streaming audio as well, the `scene-player` gets
properly initialized from what i can tell
- had to hack around the streaming audio parts.
Fixes:
- a very old bug in depth in DirectRenderer, probably from the original
tfrag stuff. Looked at PCSX2 source code to see how 32/24 bit depths are
handled. This fixes hud sprites being drawn behind level geometry.
- saturate `vftoi4` like the ps2 does when the float is too large,
fixing hidden text in `hud`. For now it's only using this in the font
code because this saturation is actually kinda slow and hasn't been a
problem in other places.
- fix crazy particle spawning issue with blue gun and dripping stuff.
This would happen if particles kill themselves while being processed
(through a callback)
This adds a new ImGUI menu to help filter out the clutter on screen.
https://user-images.githubusercontent.com/13153231/210192912-b1c28319-bacb-449c-ad7f-e7308fb75f50.mp4
This also:
- moves the imgui display bool into a game specific config file (you can
hide it in jak1, and not in jak2)
- the config file also persists the settings from this menu (except the
filters for now, future TODO)
- there is a new `ignore_imgui_hide_keybind` in this file to ignore
hiding it when you press Alt
This solves two main problems:
- the looming threat of running out of memory since every thread would
consume duplicate (and probably not needed) resources
- though I will point out, jak 2's offline tests seem to hardly use any
memory even with 400+ files, duplicated across many threads. Where as
jak 1 does indeed use tons more memory. So I think there is something
going on besides just the source files
- condense the output so it's much easier to see what is happening / how
close the test is to completing.
- one annoying thing about the multiple thread change was errors were
typically buried far in the middle of the output, this fixes that
- refactors the offline test code in general to be a lot more modular
The pretty printing is not enabled by default, run with `-p` or
`--pretty-print` if you want to use it
https://user-images.githubusercontent.com/13153231/205513212-a65c20d4-ce36-44f6-826a-cd475505dbf9.mp4
- decompile `lights.gc`
- decompile remaining `target-death` function, you can die now
- fix float issue with `matrix-from-two-vectors-smooth!` making jak face
the wrong way in the slide thing
A few issues:
- lwidea's fr3 is getting loaded and unloaded all the time
- the debug line drawing clipping is wrong (doesn't seem wrong in pcsx2,
so I think this is on us)
- nothing actually using vis data yet
- at a large distance, our view frustum culling seems slightly too
aggressive (might be that viewport scissoring is wrong)
- in the city, things seem darker as you move away. unclear how this is
happening (fog?)
Favors the `lg` namespace over `fmt` directly, as this will output the
logs to a file / has log levels.
I also made assertion errors go to a file, this unfortunately means
importing `lg` and hence `fmt` which was attempted to be avoided before.
But I'm not sure how else to do this aspect without re-inventing the
file logging.
We have a lot of commented out prints as well that we should probably
cleanup at some point / switch them to trace level and default to `info`
level.
I noticed the pattern of disabling debug logs behind some boolean,
something to consider cleaning up in the future -- if our logs were more
structured (knowing where they are coming from) then a lot this
boilerplate could be eliminated.
Closes#1358
* Update default-menu.gc
* make fog hack slightly less aggressive
* add `reload-text` back but kinda fixed
* more unlocks for non-guaranteed musics
* smarter language save & load
* also save pc settings on autosave
* more special music log cases
* one more
* Reverted default keyboard camera controls to IJKL and fixed bug where use mouse would always be set as false
* Fixed inverse axis on Right Y axis analog keyboard control
* Fixed newpad unit test, fixed variable typo, and fixed MapAnalog typo in newpad.h
Co-authored-by: animalstyletaco <animalstyletaco95@gmail.com>
* Added screenshot hotkey and added a toggle to debug GUI to disable screenshot hotkey (#1765)
* Renamed gfx_dumps folder to screenshots and screenshots taken with hotkey now use game render options not debug gui screenshot render options (#1765)
* Updated get current timestamp to use strftime
* fixed clang formating errors for screenshot hotkey
Co-authored-by: sardap <sardap@users.noreply.github.com>
Tyler Wilding
