Similar changes as have been done in the previous two games. Test the
following things:
- normal gameplay
- defend spargus turret
- satellite
- that desert mission where you shoot the gun
- that turret mission in haven forest
At a glance, i think that's everything...?
~~Didn't debug the crash yet either, hoping this is sufficient~~ (fixed,
thanks hatkid, needed to disable some blit related code)
Closes#4160
Was investigating https://github.com/open-goal/jak-project/issues/3012
and found out it's no longer an issue, fixed at some point.
Updated the method name, it actually looks like quite a few methods were
nicely named / documented in jak 3, so i might automate backporting that
documentation (likely a bunch that can go all the way back to jak 1 as
well).
Closes#3012
This is a simple multiplier to the gamepad axis input value received
from SDL events. Normally the values it provides cannot satisfy the
square range of the stick input. This is usually fine but it might play
differently with different controllers and compared to consoles,
especially considering the DualShock 1/2 have automatic calibration
which works in mysterious ways. The setting is there so any user can
adjust it for their controllers.
Saved to and loaded from the input-settings.json file.
133% matches PCSX2's default setting and is generally a good value to
map the square stick range within most modern(ish) controllers' circular
stick motion.
Progress menu option added to Jak 1 and 2. Setting can be changed from
50% all the way to 200%.
~~Renamed the analog deadzone options to stick deadzone since they don't
apply to the other analog buttons and only the (analog, yes) sticks.~~
This PR updates to SDL3, and with it, adds a handful of new features.
Everything seems to work but I'm going to look over the code once last
time before merging, some of the API changes are hard to spot.
Fixes#2773
### Pressure sensitivity support for DS3 Controllers
SDL3 adds pressure sensitivity support for DS3 controllers on windows. I
have not tested on linux. The option is disabled by default.
On windows you will need https://docs.nefarius.at/projects/DsHidMini/
and to be using SXS mode.
### DualSense and Xbox One Trigger Effects
If enabled, Jak 2 will have certain trigger effects. They are:
- xbox1:
- small vibrate when collecting dark eco
- big vibrate when changing to dark jak
- vibrate when shooting gun, proportional to gun type
- ps5:
- resistance when changing to dark jak
- different gun shooting effects
- red (resistance)
- yellow (weapon trigger)
- blue (vibrates)
- purple (less resistance)
> **Gun Shooting effects are only enabled if the new "Swap R1 and R2"
option is enabled**
There are more effects that could be used in `dualsense_effects.cpp`,
but I only exposed the ones I needed to OpenGOAL. If a modder wants to
use some of the others and wires them up end-to-end, please consider
contributing that upstream.
### New ImGUI Menu
Added new imgui options for selecting the active controller, for those
people that struggle to select the initial controller.
### Testing
The highlights of what I tested successfully:
- display
- [x] all mode switch permutations
- [x] launch with all modes saved
- [x] switch monitors / unplug monitor that was active, how does it
handle it
- [x] load with alternate monitor saved and all modes
- [x] allowing hidpi doesnt break macos
- controls
- [x] keyboard and mouse still work
- [x] pressure sensitivity on linux
Found out the hard way that the `abutton` array for pressure sensitivity
uses a different order than the `pad-buttons` enum, so I created a new
enum for abutton indexing.
I replaced any magic numbers across the codebase where it made sense,
e.g.
`(-> *cpad-list* cpads (-> self control unknown-cpad-info00 number)
abutton 6)`
becomes
`(-> *cpad-list* cpads (-> self control unknown-cpad-info00 number)
abutton (abutton-idx x))`
Finnish translations for Jak 2. These include cutscenes and all game
text.
All subtitle timings for cutscenes as well as non-cutscenes have been
edited for a better flow and to fit the 4x3 ratio.
I've been working on these solo for the most part so any input from
other finns would be appreciated.
A few issues in the progress menu I mentioned in #3504 still persist
I couldn't figure out how to add Finnish to the options menu, so I'm
gonna need someone else to do that part. 💀
But I was able to add them to the debug menu.
I also increased subtitle heap so hopefully that doesn't break anything.
Fixes#3620
---------
Co-authored-by: Tyler Wilding <xtvaser@gmail.com>
This centralizes the code that both `extractor` and the decompiler
executes. In the past this code was partially-duplicated, meaning that
the `extractor` could only do _some_ operations and not others (ie.
could not extract the audio files).
I also simplified the process to enable audio streaming in the
configuration. This is to support a new feature in the launcher that
allows you to enable these options for the decompiler:
This fixes issues with certain Jak 3 levels not rendering because there
is a mismatch between the DGO name, nickname and real level name (bsp
name).
FR3s use a different filename, so you can delete the ones you have after
this is merged.
This affects custom levels, but I don't have that toolchain set up so
someone else will have to test that.
- `fma-sphere`
- `prim-beam-h`
- `cam-start`
- `ragdoll`
- `light-trails-h`
- `light-trails`
- `menu`
- `water`
- `water-flow`
- `hud`
- `hud-classes`
- `progress`
- `progress-draw`
---
The `get-texture` macro replaces calls to `lookup-texture-by-id` and
`lookup-texture-by-id-fast`. The `defpart` macro detection was modified
to print a pair like `(texture-name tpage-name)` for the texture field
that gets turned into a `texture-id` constant. Only used in Jak 3 at the
moment, I'll probably go through the other games at a later point.
Small fix to decompiler when the original compiler uses `ra` register.
This seems to happen in "normal" code very rarely - perhaps they
manually specified this in an `rlet`.
Start figuring out buckets/textures for Jak 3.
The foreground code is not yet modified for PC - I want to wait until
the game is running, since it is too hard to do it now.
- `speech`
- `ambient`
- `water-h`
- `vol-h`
- `generic-obs`
- `carry-h`
- `pilot-h`
- `board-h`
- `gun-h`
- `flut-h`
- `indax-h`
- `lightjak-h`
- `darkjak-h`
- `target-util`
- `history`
- `collide-reaction-target`
- `logic-target`
- `sidekick`
- `projectile`
- `voicebox`
- `ragdoll-edit`
- most of `ragdoll` (not added to gsrc yet)
- `curves`
- `find-nearest`
- `lightjak-wings`
- `target-handler`
- `target-anim`
- `target`
- `target2`
- `target-swim`
- `target-lightjak`
- `target-invisible`
- `target-death`
- `target-gun`
- `gun-util`
- `board-util`
- `target-board`
- `board-states`
- `mech-h`
- `vol`
- `vent`
- `viewer`
- `gem-pool`
- `collectables`
- `crates`
- `secrets-menu`
Additionally:
- Detection of non-virtual state inheritance
- Added a config file that allows overriding the process stack size set
by `stack-size-set!` calls
- Fix for integer multiplication with `r0`
- Fixed detection for the following macros:
- `static-attack-info`
- `defpart` and `defpartgroup` (probably still needs adjustments, uses
Jak 2 implementation at the moment)
- `sound-play` (Jak 3 seems to always call `sound-play-by-name` with a
`sound-group` of 0, so the macro has been temporarily defaulted to use
that)
One somewhat significant change made here that should be noted is that
the return type of `process::init-from-entity!` was changed to `object`.
I've been thinking about this for a while, since it looks a bit nicer
without the `(none)` at the end and I have recently encountered init
methods that early return `0`.
During level extraction, the last 4 characters of the level name are
always removed, because it is assumed that '-vis' is there. But it isn't
always there. This is especially true in post-TPL games.
This causes multiple problems:
- There can be levels in the extraction that will miss their last 4
characters from their name, which is sad, and may make it harder to
identify them.
- If there are '-vis'-less levels whose names are identical apart from
the last 4 characters, the extractor will only get the last one (it
probably extracts all but overwrites everything but the last one). For
example 'ctyasha' and 'ctykora'.
This issue affects the glb extraction and the entities json extraction.
I personally think that just keeping the -vis in the name would be the
best solution, but I guess there was a reason why it was decided that it
should be removed from the name. So to adapt to this, my implementation
will still remove '-vis' from the name, but only if it is actually in
the name - otherwise it won't remove anything.
I hope my changes didn't break anything. Extraction seemed to run fine
after my changes, and I was able to see both ctyasha and ctykora json
files. And didn't see any '-vis', so it is still properly removed.
---------
Co-authored-by: Tyler Wilding <xtvaser@gmail.com>
Added a new `rip_collision` flag to the decompiler config and wired it
up. Cleaned up the comments around these fields in the JSON too for
clarity
Also refactored a bunch of the related extract functions to read from
`config` object rather than pass down a bunch of booleans
Currently only tracks enemy kills, and how they were killed. There is
currently no menu for this, but I've already added most of the text for
it. Also did a bunch of misc decompilation fixes and renamed some
methods.
Fixes#3277Fixes#3278
Adds the opengoal cheats to the secrets menu. Only cheats that are fully
functional and unlockable are there right now, which is eight cheats.
This update will reset most Jak 2 settings.
Also fixes#3274 .
Switches the slime look up table to be a texture, since I guess intel
drivers are terrible and putting the array in the shader makes it
extremely slow.
Also, a few minor changes:
- removed art-groups from the test-zone levels since this causes the
compiler to re-decompile the game, and makes the launcher slower. (left
it in commented out)
- Switched `decompile_code` to false by default in jak 2, in case people
run the decompiler and don't want to wait forever
- Fixed build warnings
Major change to how `deftype` shows up in our code:
- the decompiler will no longer emit the `offset-assert`,
`method-count-assert`, `size-assert` and `flag-assert` parameters. There
are extremely few cases where having this in the decompiled code is
helpful, as the types there come from `all-types` which already has
those parameters. This also doesn't break type consistency because:
- the asserts aren't compared.
- the first step of the test uses `all-types`, which has the asserts,
which will throw an error if they're bad.
- the decompiler won't emit the `heap-base` parameter unless necessary
now.
- the decompiler will try its hardest to turn a fixed-offset field into
an `overlay-at` field. It falls back to the old offset if all else
fails.
- `overlay-at` now supports field "dereferencing" to specify the offset
that's within a field that's a structure, e.g.:
```lisp
(deftype foobar (structure)
((vec vector :inline)
(flags int32 :overlay-at (-> vec w))
)
)
```
in this structure, the offset of `flags` will be 12 because that is the
final offset of `vec`'s `w` field within this structure.
- **removed ID from all method declarations.** IDs are only ever
automatically assigned now. Fixes#3068.
- added an `:overlay` parameter to method declarations, in order to
declare a new method that goes on top of a previously-defined method.
Syntax is `:overlay <method-name>`. Please do not ever use this.
- added `state-methods` list parameter. This lets you quickly specify a
list of states to be put in the method table. Same syntax as the
`states` list parameter. The decompiler will try to put as many states
in this as it can without messing with the method ID order.
Also changes `defmethod` to make the first type definition (before the
arguments) optional. The type can now be inferred from the first
argument. Fixes#3093.
---------
Co-authored-by: Hat Kid <6624576+Hat-Kid@users.noreply.github.com>
This change adds a few new features:
- Decompiler automatically knows the type of `find-parent-method` use in
jak 1 and jak2 when used in a method or virtual state handler.
- Decompiler inserts a call to `call-parent-method` or
`find-parent-state`
- Removed most casts related to these functions
There are still a few minor issues around this:
- There are still some casts needed when using `post` methods, as `post`
is just a `function`, and needs a cast to `(function none)` or similar.
It didn't seem easy to change the type of `post`, so I'm not going to
worry about it for this PR. It only shows up in like 3 places in jak 2.
(and 0 in jak 1)
- If "call the handler if it's not #f" logic should probably be another
macro.
Fixes#805
Hat Kid