Found out the hard way that the `abutton` array for pressure sensitivity
uses a different order than the `pad-buttons` enum, so I created a new
enum for abutton indexing.
I replaced any magic numbers across the codebase where it made sense,
e.g.
`(-> *cpad-list* cpads (-> self control unknown-cpad-info00 number)
abutton 6)`
becomes
`(-> *cpad-list* cpads (-> self control unknown-cpad-info00 number)
abutton (abutton-idx x))`
Also saves out the default `pc-settings.gc` file so it's less confusing
_and_ so we can request it from users to actually see what it's doing.
The fix in the last release was only to fix bad `game-size` values when
_loading_ the file. But if you don't have a file, it picks a default.
Right now it picks that default by:
1. Your largest reported resolution
2. If that fails, the one that is currently set
In reality this scenario can never really happen (if you have a set
resolution, it will be one of the reported ones). However what can
happen is for SDL to be misinformed by bad display/monitor drivers/the
OS and be given "supported" resolutions that aren't actually supported.
For example some users have a 4K resolution as their highest, despite
them using a 1080p monitor.
The solution is to not blindly assume the largest resolution is valid,
instead use the one the user already has set.
I'm also now filtering out resolutions by refresh rate, as perhaps this
also caused a problem. ie. the monitor supports a resolution if the
refresh rate is lowered, but it's currently set high (at 144hz for
example).
In the original game, they had no choice but to use the memory card file
as their method of persisting settings. We are not limited by such
things.
It's inconvenient to have to load your save-file when launching the game
to initialize these settings to your liking, it's also confusing
behaviour to even some players that have played the game heavily for
over a decade. We can do better by globally saving these settings to the
`pc-settings` file instead.
Originally I only migrated the volume settings, then i figured it would
be nice to also have play-hints and subtitles settings persisted. More
could debatably be moved (language is a big one...) but these were the
low hanging fruit.
I also reduced the default volumes as that is something else that has
come up a few times.
Fixes https://github.com/open-goal/jak-project/issues/3563
These users have the following spamming in logs:
> OpenGL error 0x502 S8246 T824C: GL_INVALID_OPERATION error generated.
Source and destination dimensions must be identical with the current
filtering modes.
And the solution is to correctly set their game-size. The way this
change accomplishes that is by confirming whether or not the set
`game-size` is a valid resolution informed by SDL, if not, it defaults
to the monitor's currently set display mode's resolution.
This also moves the selected display id, and the display mode into the
C++ settings -- closer to where it's actually managed and used. I'm
tempted to do this eventually for the resolutions as well but that stuff
is much more burdensome. This hopefully simplifies debugging, reduces
startup flickering, and removes back-and-forth complexity. Hopefully
this makes debugging display related problems easier. It also adds a
bunch more logging to the related code.
This attempts to do a best-effort quick fix for the sprite alignment in
the menus and first person views on higher aspect ratios. This:
- Hides the binocular borders completely when using a non-standard ratio
- Hides the borders in jak's first person view when using a non-standard
ratio
- Uses a combination of manual alignment and approximation to get the
pause menu closer.
> 32:9 screenshot.
I accomplished the last one by manually aligning all of the core sprites
and text for the most popular aspect ratios. This means that from a
practical standpoint, things should align "perfectly". However, I then
used all of those values to derive a polynomial for each adjustment
based on the aspect ratio. This allows the game to do a half-decent
approximation/interpolation for every aspect ratio in-between the common
ones. It won't be perfect, but it will be better than this:
For the FJ Mirrors, Muse, Lightning Moles, and Gambler's race the tasks
are completed in one level, then turned in at the hub. This presents a
spot of confusion for new players with the autosplitter and requires
hacky workarounds for those who want to split on these conditions. This
pull request adds in the necessary code to the autosplit-h.gc and
autosplit.gc files so that the autosplitter can identify these events,
similar to the talk to fisherman and catch fish options in the current
autosplitter.
Currently PS2 Actor Vis and FPS are only enforced when starting a run -
this enforces them on every frame similar to cheats.
In the progress menu, FPS is already disabled in speedrunner mode - this
adds the same restriction for PS2 Actor Vis.
Jak 2 already does this properly, no change needed there
This PR does two main things:
1. Work through the main low-hanging fruit issues in the formatter
keeping it from feeling mature and usable
2. Iterate and prove that point by formatting all of the Jak 1 code
base. **This has removed around 100K lines in total.**
- The decompiler will now format it's results for jak 1 to keep things
from drifting back to where they were. This is controlled by a new
config flag `format_code`.
How am I confident this hasn't broken anything?:
- I compiled the entire project and stored it's `out/jak1/obj` files
separately
- I then recompiled the project after formatting and wrote a script that
md5's each file and compares it (`compare-compilation-outputs.py`
- The results (eventually) were the same:
> This proves that the only difference before and after is non-critical
whitespace for all code/macros that is actually in use.
I'm still aware of improvements that could be made to the formatter, as
well as general optimization of it's performance. But in general these
are for rare or non-critical situations in my opinion and I'll work
through them before doing Jak 2. The vast majority looks great and is
working properly at this point. Those known issues are the following if
you are curious:
Relates to #1353
This adds no new functionality or overhead to the compiler, yet. This is
the preliminary work that has:
- added code to the compiler in several spots to flag when something is
used without being properly required/imported/whatever (disabled by
default)
- that was used to generate project wide file dependencies (some
circulars were manually fixed)
- then that graph underwent a transitive reduction and the result was
written to all `jak1` source files.
The next step will be making this actually produce and use a dependency
graph. Some of the reasons why I'm working on this:
- eliminates more `game.gp` boilerplate. This includes the `.gd` files
to some extent (`*-ag` files and `tpage` files will still need to be
handled) this is the point of the new `bundles` form. This should make
it even easier to add a new file into the source tree.
- a build order that is actually informed from something real and
compiler warnings that tell you when you are using something that won't
be available at build time.
- narrows the search space for doing LSP actions -- like searching for
references. Since it would be way too much work to store in the compiler
every location where every symbol/function/etc is used, I have to do
ad-hoc searches. By having a dependency graph i can significantly reduce
that search space.
- opens the doors for common shared code with a legitimate pattern.
Right now jak 2 shares code from the jak 1 folder. This is basically a
hack -- but by having an explicit require syntax, it would be possible
to reference arbitrary file paths, such as a `common` folder.
Some stats:
- Jak 1 has about 2500 edges between files, including transitives
- With transitives reduced at the source code level, each file seems to
have a modest amount of explicit requirements.
Known issues:
- Tracking the location for where `defmacro`s and virtual state
definitions were defined (and therefore the file) is still problematic.
Because those forms are in a macro environment, the reader does not
track them. I'm wondering if a workaround could be to search the
reader's text_db by not just the `goos::Object` but by the text
position. But for the purposes of finishing this work, I just statically
analyzed and searched the code with throwaway python code.
This was hiding options for people that only had 60hz monitors since the
two menus drifted -- it is not necessary for an entire separate menu,
just disable the option if applicable.
Don't merge this without testing it throughly
Removes trailing whitespace from goal_src files, eventually the
formatter will do this as well but it's not ready yet so this is a
decent interim solution.
A competent text editor will also do this / flag it for you.
It was narrowed down recently that a lot of people have issues with the
controller input because of Steam Input working as intended. Steam Input
can be configured to replicate controller inputs as keyboard inputs (for
example, pressing X on your controller presses Enter on the keyboard).
This results in the problem of "jumping pauses the game" and similar
issues. This is a consequence of the intended behaviour of the game
listening to all input sources at the same time.
Since the vast majority of players are using controllers over keyboards,
it makes sense to disable the keyboard input by default to solve this
problem. However that makes things awkward for users that want to use
the keyboard (how do they enable the setting). The solution is a new
imgui option in the settings menu:
**Known issue that I don't care about** -- in Jak 1's menu code, since
the flags are controlled by pointers to values instead of a lambda like
in jak 2, the menu won't update live with the imgui option. This has no
functional impact and I don't care enough to fix it.
I also made the pc-settings.gc file persist on first load if the file
wasn't found. Hopefully this helps diagnose the support issues related
to the black screen.
# Why not just ignore the keyboard inputs for a period of time?
This won't work, the keyboard is polled every frame. Therefore if you
hold down the X button on your controller, steam is continuously
signaling that `Enter` is held down on the keyboard.
Yes it would be possible to completely disable the keyboard while the
controller is being used, but this defeats the purpose of creating an
input system that allows multiple input sources at the same time.
With an explicit option, not only can the user decide the behaviour they
want (do they want the keyboard ignored or simultaneously listened to)
but we avoid breaking strange edge-cases in usage leading to never
ending complexity:
- ie. imagine steam input sends events to the mouse, well you can't
disable the mouse while using the keyboard because most times people are
using mouse and keyboard
- ie. a user that wants to hold a direction with the keyboard and press
buttons on the controller in tandem (something i frequently do while
TAS'ing, to move in a perfect straight line)
This is the more correct way of doing what that code is trying to do.
Fixes#3296
Also fixed some type inconsistencies with related code, probably wasn't
causing issues though.
May also fix the "black screen on startup" issues people keep having,
but that would simply be a nice bonus and isn't the aim of this PR.
Currently only tracks enemy kills, and how they were killed. There is
currently no menu for this, but I've already added most of the text for
it. Also did a bunch of misc decompilation fixes and renamed some
methods.
Fixes#3277Fixes#3278
Adds the opengoal cheats to the secrets menu. Only cheats that are fully
functional and unlockable are there right now, which is eight cheats.
This update will reset most Jak 2 settings.
Also fixes#3274 .
Major change to how `deftype` shows up in our code:
- the decompiler will no longer emit the `offset-assert`,
`method-count-assert`, `size-assert` and `flag-assert` parameters. There
are extremely few cases where having this in the decompiled code is
helpful, as the types there come from `all-types` which already has
those parameters. This also doesn't break type consistency because:
- the asserts aren't compared.
- the first step of the test uses `all-types`, which has the asserts,
which will throw an error if they're bad.
- the decompiler won't emit the `heap-base` parameter unless necessary
now.
- the decompiler will try its hardest to turn a fixed-offset field into
an `overlay-at` field. It falls back to the old offset if all else
fails.
- `overlay-at` now supports field "dereferencing" to specify the offset
that's within a field that's a structure, e.g.:
```lisp
(deftype foobar (structure)
((vec vector :inline)
(flags int32 :overlay-at (-> vec w))
)
)
```
in this structure, the offset of `flags` will be 12 because that is the
final offset of `vec`'s `w` field within this structure.
- **removed ID from all method declarations.** IDs are only ever
automatically assigned now. Fixes#3068.
- added an `:overlay` parameter to method declarations, in order to
declare a new method that goes on top of a previously-defined method.
Syntax is `:overlay <method-name>`. Please do not ever use this.
- added `state-methods` list parameter. This lets you quickly specify a
list of states to be put in the method table. Same syntax as the
`states` list parameter. The decompiler will try to put as many states
in this as it can without messing with the method ID order.
Also changes `defmethod` to make the first type definition (before the
arguments) optional. The type can now be inferred from the first
argument. Fixes#3093.
---------
Co-authored-by: Hat Kid <6624576+Hat-Kid@users.noreply.github.com>
Adds controller LED features to Jak 2:
- progressive flickering denoting health
- copies tomb simon says puzzle colors
- unique colors for each gun
- orange color for being indax
- yellow color for being in mech
- purple color for being darkjak
- blue color for being in board
- red flash when wanted.
May add more features later?
Also did some minor clean-up on some types.
- fix deci2 hang when closing the game in retail mode.
- change bigmap to always filter because the pixels look really ugly.
- don't start the game in fullscreen by default if we're debugging.
Tyler Wilding