The main bug this fixes is not being able to use level select when your
language isn't translated. Why? Because they use the result from
`lookup-text!` to determine if a menu item should be drawn or not. No
text found, no menu item.
However this uncovered a long-standing bug in my fallback extension to
this code. If you call this function with a text-id that doesnt even
have an english string, it will recursively keep calling itself until it
crashes. Of course the first few tasks in the game are dummies and have
no valid text-id so this had to be fixed.
Should be fixed for all 3 games.
Fixes both interval and animation speed. (jak1 previously only had a fix
for the former.)
This should close#3518, and one of the issues of #1499.
The solution is not the cleanest. The results are going to be wrong in
case the FPS doesn't reach the maximum set.
A better solution would be to make `random-time` a float, so that it can
be subtracted by `time-adjust-ratio`, but I don't know if changing a
type for this purpose is allowed here. Tell me if I should do that
instead.
Tested only on jak2.
Co-authored-by: Tyler Wilding <xtvaser@gmail.com>
Prior to SDL3, borderless windows were kinda a hack, they cleaned all of
that up. The side-effect of that is that the C++ code keeps track of the
current window size (it does this for framebuffer sizing, but also to
set the size of the window).
This is now an issue because SDL is properly firing events when you
change to borderless mode, so our window size gets updated to the size
of the entire monitor. When you switch to windowed mode from borderless,
it now seems like it didn't work (it did, its just still taking up the
entire screen).
This could be better cleaned up if more settings are extracted out of
GOAL and put into C++ so they can be managed and accessed where they
belong. But for now, this is a minimally invasive fix.
Fixes#3917
This is a simple multiplier to the gamepad axis input value received
from SDL events. Normally the values it provides cannot satisfy the
square range of the stick input. This is usually fine but it might play
differently with different controllers and compared to consoles,
especially considering the DualShock 1/2 have automatic calibration
which works in mysterious ways. The setting is there so any user can
adjust it for their controllers.
Saved to and loaded from the input-settings.json file.
133% matches PCSX2's default setting and is generally a good value to
map the square stick range within most modern(ish) controllers' circular
stick motion.
Progress menu option added to Jak 1 and 2. Setting can be changed from
50% all the way to 200%.
~~Renamed the analog deadzone options to stick deadzone since they don't
apply to the other analog buttons and only the (analog, yes) sticks.~~
Fixes#3909
Long standing issue in Jak 2's subtitles, it's actually kinda incredible
that finnish didn't run into this problem. Later in this code it
accesses the subtitle based on the language-id, and finnish is always
out of bounds -- but it never caused a catastrophic issue.
Polish on the otherhand is much more out of bounds and always causes an
access violation / crash.
Jak 2's subtitle code has no fallback (ie. use english if not
translated) for cutscenes, since they are not defined in the base file
like in Jak 1. This means that an untranslated language will render no
subtitles during cutscenes. Translations are welcome!.
Tested a cutscene in:
- english
- italian (base game with subtitles)
- finnish (new language, actually is translated)
- polish (new language, not translated)
This PR updates to SDL3, and with it, adds a handful of new features.
Everything seems to work but I'm going to look over the code once last
time before merging, some of the API changes are hard to spot.
Fixes#2773
### Pressure sensitivity support for DS3 Controllers
SDL3 adds pressure sensitivity support for DS3 controllers on windows. I
have not tested on linux. The option is disabled by default.
On windows you will need https://docs.nefarius.at/projects/DsHidMini/
and to be using SXS mode.
### DualSense and Xbox One Trigger Effects
If enabled, Jak 2 will have certain trigger effects. They are:
- xbox1:
- small vibrate when collecting dark eco
- big vibrate when changing to dark jak
- vibrate when shooting gun, proportional to gun type
- ps5:
- resistance when changing to dark jak
- different gun shooting effects
- red (resistance)
- yellow (weapon trigger)
- blue (vibrates)
- purple (less resistance)
> **Gun Shooting effects are only enabled if the new "Swap R1 and R2"
option is enabled**
There are more effects that could be used in `dualsense_effects.cpp`,
but I only exposed the ones I needed to OpenGOAL. If a modder wants to
use some of the others and wires them up end-to-end, please consider
contributing that upstream.
### New ImGUI Menu
Added new imgui options for selecting the active controller, for those
people that struggle to select the initial controller.
### Testing
The highlights of what I tested successfully:
- display
- [x] all mode switch permutations
- [x] launch with all modes saved
- [x] switch monitors / unplug monitor that was active, how does it
handle it
- [x] load with alternate monitor saved and all modes
- [x] allowing hidpi doesnt break macos
- controls
- [x] keyboard and mouse still work
- [x] pressure sensitivity on linux
Custom levels for Jak 2/3 now support envmapped TIE geometry. The TIE
extract was also changed to ignore materials that have the specular flag
set, but are missing a roughness texture.
Jak 2/3 now also support the `build-actor` tool.
The `build-custom-level` and `build-actor` macros now have a few new
options:
- Both now have a `force-run` option (`#f` by default) that, when set to
`#t`, will always run level/art group generation even if the output
files are up to date.
- `build-custom-level` has a `gen-fr3` option (`#t` by default) that,
when set to `#f`, will skip generating the FR3 file for the custom level
and only generate the GOAL level file to skip the potentially slow
process of finding and adding art groups and textures. Useful for when
you want to temporarily edit only the GOAL side of the level (such as
entity placement, etc.).
- `build-actor` has a `texture-bucket` option (default 0) which will
determine what DMA sink group the model will be placed in, which is
useful to determine the draw order of the model. Previously, this was
omitted, resulting in shadows not drawing over custom actors because the
actors were put in a bucket that is drawn after shadows (this behavior
can be restored with `:texture-bucket #f`).
There's a feature to draw levels with a different camera matrix. This
uses `camera-temp-other`, `camera-rot-other`, etc instead of
`camera-temp`, `camera-rot`... I assumed that `trans-other` was the
"other" version of `trans`, but it turns out this isn't true -
`trans-other` is combined with `quat-other` and the original camera
matrix.
This fixes the issue by using the translation part of
`inv-camera-rot-other` for othercam levels only. (it works in all cases,
but I didn't want to use it for normal levels since I think it will be
less accurate)
Co-authored-by: water111 <awaterford1111445@gmail.com>
Migrates all code, there should be no change in the compilation output
(linter should check this)
At first i was considering making these builtins, which short of a bunch
of code generation, would require some sort of dynamic definition in
`Atoms.cpp`. This isn't hard but, i figured it would be better to keep
it simple and just generate the OG macros.
Fixes https://github.com/open-goal/jak-project/issues/233
if you sideflip into grind in the digsite mission, the clasps wont break
because it is considered a `board-spin` attack instead of `board`. This
extends the condition to allow for `board-spin` as well.
~~Should I wrap this in an `#if PC_PORT`?~~ done
Since #3735, loading consite in Jak 2 crashes due to an assert in the
code that handles the PC clut blender DMA. The unused and
half-implemented `kor-transform` texture animation doesn't have any
blenders as the texture names are commented out in the C++ definition
(and it seems that these textures are defined multiple times within
different tpages in the same DGO, leading to errors during startup if
uncommented), leading to a mismatch between the actual qwc in GOAL and
the assumed DMA data size in C++.
Found out the hard way that the `abutton` array for pressure sensitivity
uses a different order than the `pad-buttons` enum, so I created a new
enum for abutton indexing.
I replaced any magic numbers across the codebase where it made sense,
e.g.
`(-> *cpad-list* cpads (-> self control unknown-cpad-info00 number)
abutton 6)`
becomes
`(-> *cpad-list* cpads (-> self control unknown-cpad-info00 number)
abutton (abutton-idx x))`
Goes with https://github.com/open-goal/speedrunning/pull/21
Based on some of the autosplit points from the [comgold
sheet](https://docs.google.com/spreadsheets/d/1ZtceX0ZxCLkufVFQuCgVxptvmVgp6deHwPYWxUPi258/edit?gid=0#gid=0),
plus one after talking to samos to give a clean split for timing the
deload.
```
(tomb-poles-poles uint8) ;; left tomb/daxter boulder start
(fortress-save-friends-introduction uint8) ;; talk to torn (before rescue friends)
(sewer-escort-get-gun uint8) ;; get peacemaker
(forest-protect-introduction uint8) ;; talk to onin (protect samos)
(forest-protect-meeting uint8) ;; talk to samos (protect samos)
```
Finnish translations for Jak 2. These include cutscenes and all game
text.
All subtitle timings for cutscenes as well as non-cutscenes have been
edited for a better flow and to fit the 4x3 ratio.
I've been working on these solo for the most part so any input from
other finns would be appreciated.
A few issues in the progress menu I mentioned in #3504 still persist
I couldn't figure out how to add Finnish to the options menu, so I'm
gonna need someone else to do that part. 💀
But I was able to add them to the debug menu.
I also increased subtitle heap so hopefully that doesn't break anything.
Fixes#3620
---------
Co-authored-by: Tyler Wilding <xtvaser@gmail.com>
In the original game, they had no choice but to use the memory card file
as their method of persisting settings. We are not limited by such
things.
It's inconvenient to have to load your save-file when launching the game
to initialize these settings to your liking, it's also confusing
behaviour to even some players that have played the game heavily for
over a decade. We can do better by globally saving these settings to the
`pc-settings` file instead.
Originally I only migrated the volume settings, then i figured it would
be nice to also have play-hints and subtitles settings persisted. More
could debatably be moved (language is a big one...) but these were the
low hanging fruit.
I also reduced the default volumes as that is something else that has
come up a few times.
Fixes https://github.com/open-goal/jak-project/issues/3563
These users have the following spamming in logs:
> OpenGL error 0x502 S8246 T824C: GL_INVALID_OPERATION error generated.
Source and destination dimensions must be identical with the current
filtering modes.
And the solution is to correctly set their game-size. The way this
change accomplishes that is by confirming whether or not the set
`game-size` is a valid resolution informed by SDL, if not, it defaults
to the monitor's currently set display mode's resolution.
This also moves the selected display id, and the display mode into the
C++ settings -- closer to where it's actually managed and used. I'm
tempted to do this eventually for the resolutions as well but that stuff
is much more burdensome. This hopefully simplifies debugging, reduces
startup flickering, and removes back-and-forth complexity. Hopefully
this makes debugging display related problems easier. It also adds a
bunch more logging to the related code.
This does a couple of things:
- The `custom_levels` folder was renamed to `custom_assets` and contains
`levels`, `models` and `texture_replacements` folders for Jak 1, 2 and 3
in order to keep everything regarding custom stuff in one place.
- With this, texture replacements now use separate folders for all games
- A build actor tool was added that generates art groups for custom
actors
- Custom levels can now specify what custom models from the `models`
folder they want to import, this will add them to the level's FR3.
- A `test-zone-obs.gc` file was added, containing a `test-actor` process
that uses a custom model as an example.
The build actor tool is still very WIP, the joints and the default
animation are hardcoded, but it allows for importing any GLB file as a
merc model.
Relates to #1353
This adds no new functionality or overhead to the compiler, yet. This is
the preliminary work that has:
- added code to the compiler in several spots to flag when something is
used without being properly required/imported/whatever (disabled by
default)
- that was used to generate project wide file dependencies (some
circulars were manually fixed)
- then that graph underwent a transitive reduction and the result was
written to all `jak1` source files.
The next step will be making this actually produce and use a dependency
graph. Some of the reasons why I'm working on this:
- eliminates more `game.gp` boilerplate. This includes the `.gd` files
to some extent (`*-ag` files and `tpage` files will still need to be
handled) this is the point of the new `bundles` form. This should make
it even easier to add a new file into the source tree.
- a build order that is actually informed from something real and
compiler warnings that tell you when you are using something that won't
be available at build time.
- narrows the search space for doing LSP actions -- like searching for
references. Since it would be way too much work to store in the compiler
every location where every symbol/function/etc is used, I have to do
ad-hoc searches. By having a dependency graph i can significantly reduce
that search space.
- opens the doors for common shared code with a legitimate pattern.
Right now jak 2 shares code from the jak 1 folder. This is basically a
hack -- but by having an explicit require syntax, it would be possible
to reference arbitrary file paths, such as a `common` folder.
Some stats:
- Jak 1 has about 2500 edges between files, including transitives
- With transitives reduced at the source code level, each file seems to
have a modest amount of explicit requirements.
Known issues:
- Tracking the location for where `defmacro`s and virtual state
definitions were defined (and therefore the file) is still problematic.
Because those forms are in a macro environment, the reader does not
track them. I'm wondering if a workaround could be to search the
reader's text_db by not just the `goos::Object` but by the text
position. But for the purposes of finishing this work, I just statically
analyzed and searched the code with throwaway python code.
This fixes issues with certain Jak 3 levels not rendering because there
is a mismatch between the DGO name, nickname and real level name (bsp
name).
FR3s use a different filename, so you can delete the ones you have after
this is merged.
This affects custom levels, but I don't have that toolchain set up so
someone else will have to test that.
Tyler Wilding