This bit of ff-squad-control code is trying to sort guards based on
their distance from some shared target. In some cases the
`vector-vector-distance` returns NaN. In the bubble sort below this
change, the < operation always returns #t when NaN is involved, so the
NaN guard gets swapped back and forth endlessly, causing an infinite
loop.
ported the implementation from jak 2 into jak3 pretty much exactly.
added a new color for L2 tricks, and shrunk the text/width a bit so it
wouldn't end up covered by the minimap.
also fixed small bug in jak 2 (and 3) where dismounting jetboard
wouldn't reset the trick display, so displayed score wouldn't match the
granted score
---------
Co-authored-by: Tyler Wilding <xtvaser@gmail.com>
addresses:
- starting new game from title screen with speedrun mode on -> shows
intro cutscene, doesn't start autosplitter, verification text not shown
- resetting run during intro cutscene leaves weird desert state across
training course (not an issue if we fix^)
- reset in hero mode after completing training course -> verification
text not shown
- resetting during tentacle grab leaves the water bubble sound playing
forever
Fixes#4177
Also additionally fixes the setting not doing anything to the
terraformer tentacles. Tentacles are no longer considered 'solid' when
dead while the setting is on.
- `visvol-edit`
- `editable`
- `editable-player`
- `mysql-nav-graph`
- `nav-graph-editor`
- `nav-mesh-editor-h`
- `nav-mesh-editor`
The SQL data is not filled in yet.
Similar changes as have been done in the previous two games. Test the
following things:
- normal gameplay
- defend spargus turret
- satellite
- that desert mission where you shoot the gun
- that turret mission in haven forest
At a glance, i think that's everything...?
~~Didn't debug the crash yet either, hoping this is sufficient~~ (fixed,
thanks hatkid, needed to disable some blit related code)
Closes#4160
There was some bad manual decomp in `wasdef-manager` that caused the
mission to sometimes softlock, preventing Jak from exiting the turret
after destroying all Makers.
Also adds stick sensitivity setting from Jak 2 and fixes a regression
with the Light Jak freeze screen overlay on PC aspect ratios.
Closes#4179Closes#4154
Was investigating https://github.com/open-goal/jak-project/issues/3012
and found out it's no longer an issue, fixed at some point.
Updated the method name, it actually looks like quite a few methods were
nicely named / documented in jak 3, so i might automate backporting that
documentation (likely a bunch that can go all the way back to jak 1 as
well).
Closes#3012
Implement PC camera inversion toggles, for first/third
vertical/horizontal controls
Reuses vanilla placement of Camera Options menu (as opposed to under
Input Options like jak1/2)
fixes#4158
Took @ManDude 's suggestion to make the sandstorm's push effect on Jak
slightly less aggressive, to better match the effect on PS2 where it
never hits 60fps. This was especially noticeable in finalboss. Tested at
higher FPS as well
a bit of a hack but I'm not sure what else to do besides completely
unload/reload wasstadb-obs. open to suggestions
here is the bug
https://youtu.be/C1KZlRFbjys?t=50
If the `arg0` vector has extreme values, `a2-0` and `a1-1` can end up
being negative, which leads to out-of-bounds access when using these
values to read from the `xz-height-map`'s `data` array, and crashes the
game (you can pretty easily reproduce this in jak 3 by overcharging the
"superfasthoverbikeglitch")
The `min` here already makes sure these values don't go too high, but
doesn't cover the case when they go negative.
As I understand it, this `data` in the `*traffic-height-map*` functions
as a 2d array, bucketing x/z coordinates into heights for the vehicle.
Adds some additional autosplit points that I think will be useful.
Also tweaks the `errol-dead?` condition to update immediately on the
final hit (there's a sec or so of animation before it returns to
`initial-state`, where it was being updated previously)
Corresponding autosplitter updates:
https://github.com/open-goal/speedrunning/pull/27
Fixes for:
- `prebot` sword attack and projectile speed (fixes#4050)
- Fast first person camera turning speed (fixes#4051)
- Slow turret camera turning speed (fixes#4052)
- `flyingsaw` movement and rotation speed (fixes#4053)
- Green eco drain rate on jetboard during `forest-kill-plants` mission
(fixes#4054)
- `skeet` rotation speed
- `maker-grenade` tumble speed
- Jetboard spin speed
- `hud-skill` rotation speed (also for jak2)
- `gun-dark-shot` projectile speed (also for jak2)
- `target-float` up/down speed (also for jak2)
- Texscroll speed
- Slow walk anim after landing from a jump
The dust storm will now always behave as if it was at 60 FPS. Particles
only spawn every 1/60th of a second and the push vector is converted as
if it was originally equivalent to 1/60th of a second.
Fixes#3997: The script for the orb that is spawned when getting a medal
in the satellite game was using the wrong entity name.
Fixes#3998: The `spider-manager` process was invalid for one frame,
causing the score to be set to the value of `#f`, winning the game
instantly.
Also doubled the PC port texture count, which should hopefully fix the
crash that happens when playing the game all the way through to the end
of the Destroy Dark Eco Tanks mission in one sitting.
Two changes that fix some Jak 3 audio bugs.
In some areas, sound effects would seem to cut off randomly. This was
caused by the sound code reusing IDs, but overlord didn't realize. It
would try to kill a sound effect by ID that had already died, and the ID
was reassigned to a new sound. To fix this, I made the handle IDs always
increment. I also tested starting the ID at large numbers and confirmed
that worked.
I also added support for the BRANCH grain. This makes the
`wastelander-shot` and possibly other sound effects work. It doesn't
support all the features, but this is probably enough.
Fun fact: the wastelander shot is supposed to have 7 variations, but you
always get the same one because they set the sound mask wrong.
I added a line you can uncomment if you want to experience the other 6
variations.
---------
Co-authored-by: water111 <awaterford1111445@gmail.com>
This needs a parameter, otherwise it was reading some uninitialized
value. In some cases, the uninitialized value would leave the nav stuff
on, and the marauders would go crazy trying to avoid each other.
After the change to vector ops, subrails was crashing. This fixes the
crash by fixing a stack type and also marks those new vector op
functions as inline.
Co-authored-by: water111 <awaterford1111445@gmail.com>
This adds more recognition for inlined vector functions to the
decompiler, which can clean up a bunch of ugly looking code/`rlet`s.
Unfortunately, this changes the numbering of ops in the decomp, since
all the vector instructions get combined in a single "operation" by the
decompiler. I really tried to avoid having this ever happen in the
decompiler and this is one of the few cases where it has. So I had to
update a bunch of type casts.
For that reason I haven't turned this on in Jak 2 yet, although I am
planning to do that at some point. (probably at the same time as porting
back a bunch of jak 3 improvements to jak 2)
---------
Co-authored-by: water111 <awaterford1111445@gmail.com>
Custom levels for Jak 2/3 now support envmapped TIE geometry. The TIE
extract was also changed to ignore materials that have the specular flag
set, but are missing a roughness texture.
Jak 2/3 now also support the `build-actor` tool.
The `build-custom-level` and `build-actor` macros now have a few new
options:
- Both now have a `force-run` option (`#f` by default) that, when set to
`#t`, will always run level/art group generation even if the output
files are up to date.
- `build-custom-level` has a `gen-fr3` option (`#t` by default) that,
when set to `#f`, will skip generating the FR3 file for the custom level
and only generate the GOAL level file to skip the potentially slow
process of finding and adding art groups and textures. Useful for when
you want to temporarily edit only the GOAL side of the level (such as
entity placement, etc.).
- `build-actor` has a `texture-bucket` option (default 0) which will
determine what DMA sink group the model will be placed in, which is
useful to determine the draw order of the model. Previously, this was
omitted, resulting in shadows not drawing over custom actors because the
actors were put in a bucket that is drawn after shadows (this behavior
can be restored with `:texture-bucket #f`).
This PR does a few cleanups:
- improve method names/comments/flags for `enemy.gc` and a few other
files
- fix `new-stack-matrix0` not working for jak 3
- add `matrix-copy!` detection for jak 3
- add `vector-copy!` detection
---------
Co-authored-by: water111 <awaterford1111445@gmail.com>
Migrates all code, there should be no change in the compilation output
(linter should check this)
At first i was considering making these builtins, which short of a bunch
of code generation, would require some sort of dynamic definition in
`Atoms.cpp`. This isn't hard but, i figured it would be better to keep
it simple and just generate the OG macros.
Fixes https://github.com/open-goal/jak-project/issues/233
Simple workaround to put an effect in a different bucket. I don't think
there's a difference in the result, but this is just easier to handle on
the PC renderer side.
Co-authored-by: water111 <awaterford1111445@gmail.com>
Base implementation of the popup menu and speedrunner mode in Jak 3.
Autosplitter is untested because I'm on Linux.
Also a couple of other misc changes:
- Model replacements can now have custom bone weights. Needs the "Use
Custom Bone Weights" property (provided by the OpenGOAL Blender plugin)
enabled in Blender.
- Better error message for lump syntax errors in custom level JSON
files.
Fixes issue with not handling texture flipping flags in sprite renderer
(new jak 3 feature). As far as I can tell, there is no visible
difference because the textures that use this flag are symmetric.
Fix issue with not adding an `and` with `0xf` on the offset into the xy
table. This is added only in jak 3, where `vi07`'s upper bits are
sometimes nonzero, but doesn't hurt to have in all three games.
```
iaddi vi09, vi00, 0xf | nop
iand vi07, vi07, vi09 | nop
```
Fix issue with inf/nan causing the tentacle to not appear:
---------
Co-authored-by: water111 <awaterford1111445@gmail.com>
- Fix global heap display in cheat mode
- Fix `tpl-watcher` NaNs after they fire their laser (`vf0` was being
clobbered) (Fixes#3684)
- Fix `artifact-race` talkers (Fixes#3685)
`bigmap` and `blit-displays` mostly work. `blit-displays` is still
missing all of the special effects that were added in Jak 3 (brightness
and contrast settings, screen blur effect, etc.).
`bigmap` is missing the player marker texture (`hud-target-marker`) for
some reason, it's part of `tpage-17` which is coming from
`progress-minimap` and should already be included. The icons also
currently stretch when using aspect ratios other than 4:3.
The progress menu now also works for the most part. The draw order is a
bit messed up because some code was initially drawing things with the
ocean bucket, which was changed to use `hud-draw-hud-alpha` instead for
now. The texture for the volume and brightness/contrast sliders still
looks wrong.
Fixes#3653Fixes#3656
Found out the hard way that the `abutton` array for pressure sensitivity
uses a different order than the `pad-buttons` enum, so I created a new
enum for abutton indexing.
I replaced any magic numbers across the codebase where it made sense,
e.g.
`(-> *cpad-list* cpads (-> self control unknown-cpad-info00 number)
abutton 6)`
becomes
`(-> *cpad-list* cpads (-> self control unknown-cpad-info00 number)
abutton (abutton-idx x))`
They still don't work yet, this is just naming/comments to help with
debug.
The vehicle tracks are now at least trying to draw, but like the others,
don't actually show up.
Hat Kid